JPREIS was founded 20 years ago.
It is present in the areas of industrial maintenance, metalworks and metal construction.
We invest in the quality of our work, seeking to provide our customers with an excellent service, based on technical knowledge and experience in the different sectors of operation.
Over the past few years a significant investment has been made in infrastructure and productive equipment.
We invest in the training and specialization of our employees.
In 2018 an engineering office was created to offer our customers innovative solutions.
This department has specialists from different areas, namely;
Welding engineering;
Mechanical engineering.

Metal processing company established in 2004.
4000 m square meter plant with: available equipment:

-Laser cutting machine TruLaser 8000 (2017), table 2x8m, cutting thickness 30mm
-Bending machine TruBend 5230 (2017), 3m bending length
-Bending machine TruBend 8400 (2018), 8m bending length
-Shot blasting chamber 15m x 5m x 5m; 2x2,5 cranes inside
-Wet painting chamber 18m x 5m x 5m; 2x2,5 cranes inside
-Welding (manual)

JSC" KMT" is an official dealer of PALFINGER hydraulic lifting equipment in Lithuania.
PALFINGER – Austrian producer - is the biggest hydraulic lifting equipment manufacturer in the
world with more than 10 000 thousand employees and 1471 mln. EURO turnover in 2017
Company “KMT” produces subframes for trucks and hydraulic cranes, tippers, components for commercial vehicles.

UAB(JSC) InSpektras company was founded in 2011 in Vilnius , capital of Lithuania. The company is focused on laser cutting bending, flat deburring and tubling processes of stainless steel, carbon steel and aluminum, but can also offer a variety of other processes working closely with partners. Workshop area of 1000 m2. and approx. of 10 employees. Company processes sheet metal over 550 tons and making a turnover of 2,2 million a year (2021). Stable growth each year shows unity and the trust from clients for long years, because InSpektras working not only with big companies, but also with small ones helping to grow together, improve products and reach higher goals.

Company KADING gathers experienced engineers who have developed their skills on projects which have required multi-disciplinary knowledge (mechanics, hydraulic, etc.)

Our competences:

Engineering services:
- conceptual product development
- 2D/3D product design
- reversible engineering
- optimization of products and manufacturing processes
- calculations and FEM analysis,
- preparation of production documents (technical drawings, technologies)
- creation of related documents/documents for users (spare parts catalogs, operating and maintenance instructions)
- preparation of documentation for product certifications
- product visualization (rendering)

We are providing services with licensed CAD software SolidWorks (2 Premium + 2 Standard) and Solid EDGE 2019, with the possibility of EPDM integration (total 4 SW PDM Professional licenses). Our engineers also are familiar with other CAD systems (CREO, CATIA, Inventor) so we are also able to support you in that area, dependable on the project and its duration.

Manufacturing & prototyping:

Together with our partners, we are also offering the following services:

- Milling & Turning
- Welding (MIG / TIG)
- Cutting (plasma / laser / waterjet)
- Bending
- Punching
- Assembling (mechanical / hose / welded)
- 5 axis milling

We have successfully implemented a quality management system according to ISO 9001:2015 into our business processes which shows our dedication to providing quality and best possible services to our clients.

We are inviting you that you allow us to present our services and we wish that your company becomes part of our satisfied customers.

We provide metal fabrication and forming services that cater to industries of all kinds. From small projects to large projects, we pride ourselves on delivering quality services with consistency every time you order from us.

Company Kamberg based in Poland runs jobs in the field of Metallberbeitung.
Our company operates mainly laser cutting,
Maximum thickness of the processed part are:
1. Construction steel up to 25mm
2. stainless steel up to 20mm
3. aluminum to 15 mm
We also manufacture sheet metal bending, and steel processing (welding).
Our company offers Estimates, high quality and low prices. We stehten with professional advice at your side and invite you to cooperation.

technology

We provide for the production of sheet metal parts to complex technological solutions, whether single production or series production. Our main profile is the processing of sheet metal parts of the thickness of 0.5 mm to 8 mm. Our company has production experience of over 20 years, from planning to finished product manufacturing. We provide our customers with products of different levels here, from simple crushing to the production of more complex parts. Thanks to our partners, we also take on different surface treatments.

Technological options:

Shears: cuttable thickness: between 0.5-4 mm.

Edge-turn: 5 Amada bending machines

Laser cutting: 1 Kimla Fiber Laser Cutting Machines

Punching-nibbling: 3 Amada punching machines

welding

assembly

Pem Squeeze: presses of various pressing nuts, screws and other
fasteners

Confiscation of press nuts

TOX connection technology

pressing machines

belt sanders

Drilling with frame

Our core competence is laser welding of provided parts. With the laser, very slim welds with a large depth-to-width ratio can be achieved.

Due to the high processing speed, the thermal load is low and the distortion is minimal. Contactless welding makes it possible to process complicated seam geometries and hard-to-reach areas within the workpiece. As a rule, the welding joint is fused from proprietary material.

If required, an additional material can be added via a wire feeder. With the laser, a wide range of materials can be welded without oxide (steel, stainless steel, cast iron, aluminum, cast aluminum, titanium, Hastelloy, Inconel,...)

Hopf GmbH is a medium-sized family company that has specialized in new developments in the areas of building, ventilation and environmental technology as well as the manufacture and installation of apparatus and systems in various branches of industry. The areas of machine and apparatus construction as well as steel and sheet metal processing are also among the core competencies.

KAROVIČ oceľová výroba, s.r.o. with its registered office in Lozorno was established in 2009 as a company active in sheet metal processing in particular. Thanks to the quality work of the entire team and the use of state-of-the-art technologies aimed at achieving supreme quality and flexibility, we offer a complex service in this field to our customers.

In the course of our operation on the market, we have expanded our operations to include mechanical engineering and locksmith production in order to offer improved quality service.

Nowadays, we offer a professional service in the field of sheet metal processing, stainless steel production for the food industry, structure welding, engineering and design works.

The company’s priority is to meet the most demanding customer requirements from the time an order is received up until its completion, while focusing on speed, quality, flexibility and economy. These objectives are reached thanks to continuous process improvement, technology modernisation, machinery expansion and by raising the entire team’s qualifications.

The primary activity in "Karovic Produkt" is the assembly and welding of mechanical components and machining of metal parts. We can create metal constructions on demand, either one piece or series production.

As Kaya Tekno Çelik Yapı, we serve in the metal processing sector with advanced technology and expertise. Our company is a pioneer in the sector in operations that require high precision such as CNC press brake bending, fiber laser cutting, welding operations.

Kaykac Machine Co is a subcontracting firm for machining and metal processing works since 1982.We welcome new customers with our huge experience and modern manufacturing ability with high level quality control process.We can provide casting,forging,stamping,laser cutting and sheet metal processing as well as welded parts production.Our company has ISO 9001:2008 and EN 15085-2 CL 1 quality certificates.