The company
Basement mold manufacturing is a high quality operation, tool and supply company, we characterized the precision, reliability, and low cost manufacturing from.
Reliability and speed extra special in the wire and sinker EDM but also "NEW"
in CNC 2-3D / to 5Achsensimultan milling are our strengths.
We are a top supplier for renowned customers.
Injection molds, stamping and bending tools and their spare parts, precision parts
As well as our own developed product: Clamping systems for wire EDM machines
possible with very good Oualität, individual designs, affordable clamping systems
for your needs.

For more than four decades, the name Kerling stands for the development and production of high quality technical plastic parts. We offer the idea to the final product through organized, customer-friendly manufacturing solutions from a single source. We specialize in the production of housing for the power electronics from renowned thyristors and IGBT Manufacturer. Basis for the production of sophisticated plastic parts is the use of innovative injection molding technology and production processes. We produce on a production area of 4500 sqm with modern, fully automated injection molding machines of size 25 to.-650 tons. Our corporate goals, including without limitation zero-defect production which we will support the certification in Duch 9001:2000, 14001 and EMAS. In addition, we also received awards from our customers via a PPM value of 0, which we are very proud and consider this as a credit to our staff. We also have been successful for years as a training company for technical and commercial professions operate.

Keurhorst Metalworking was founded in 2015 by Michiel Keurhorst, an experienced metalworker, who has mastered the profession from practice after years of experience in the world of machining.

As a company, we mainly focus on complex 3D milling, but whether it is workpieces of Steel, stainless steel, aluminum, titanium or plastic, we always aim for the best results and are satisfied with nothing less.

Furthermore, we are pre-eminently the address when it comes to high-end fine mechanical parts for, among other things, injection molds.

In order to achieve this, we have access to a beautiful Hermle milling machine, and a Bridgeport. Furthermore, we naturally work with the best (measuring) tools, in a fully air-conditioned workshop.

In addition, we can sometimes offer something extra with our Radial drilling machine, and a 3D printer.

We are a young and dynamic company that does not shy away from challenges and where perfection is of paramount importance. Need something that requires high accuracy? Look no further .. and work with Keurhorst Metalworking.

We present our innovative Start-up operating in the field of precision mechanics, set up to create and produce CNC turned and milled small parts, ground, rolled, knurled and knurled through a digitized innovative production process, with all interconnected production units , thanks to the management of the work order through the MES system
The distinguishing feature of the company is the ability to create special parts with high precision design, in small and large series, in special steels, stainless and alloy, aluminum, brass, bronze, plastic and innovative alloys such as titanium.
We aim to satisfy even the most demanding requests, providing qualified personnel, production organization and a range of innovative machines, in addition to availing ourselves of the collaboration of suppliers specialized in different types of processes and treatments.
We will have the possibility to perform mechanical design with powerful CAD / CAM systems.
The products manufactured by Kewa will be 100% checked both manually and with optical vision systems.
The expected benefits will be a competitive advantage to allow small productions such as large scale, faster production process, 360 ° controlled, greater flexibility and greater productivity through reduced setup times, errors reduction and downtime. All this accompanied by a higher quality obtained by sensors that monitor the production and an ISO 9001 standardization.
We thank you for your kind feedback and we invite you to contact us or reach us for any questions or information. You can also follow us on our internet and social channels.

Kıvançlar Casting was established in 1981 in Ankara Sincan Organized Industrial Zone on an area of 2000m2. Kıvançlar is interested in cast iron and ductile iron casting works. We have a fully automated resin line. We also have a spectrometer laboratory where the necessary analyzes of the produced products are carried out

Kizilirmak DÖKÜM is one of the experienced Giesereien in Turkey based in Çorum

Kizilirmak DÖKÜM (Gieserei) and Kizilirmak MAKINA (Maschinenfabrik) are subsidiaries of Kizilirmak HOLDING and supply since 1980 took known customers at home and abroad with gray cast iron, and steel castings Sferoguss of 10 kg - 8.000 kg.

The company supplies the mining, cement plants, iron and steel industry, railway industry, the energy sector with hydropower and coal-fired plants and the general engineering industry with unalloyed, niedriglegietem and alloyed Stagluss, corrosion resisting steel castings, carbon steel castings, manganese steel castings, Ni-Hard, special materials as steel castings according to customer requirements in accordance with DIN , AISI, SEA and BE Satandards.
Our's products include brake discs and other parts are recently arrived in the express trains at SIEMENS, ALSTOM and BOMBARDIER used.

Klücher Tech competence in milling technology

Founded in 2021, Klücher Tech produces components for you in the areas of tool and mold construction as well as machine and plant construction. The range of services includes extensive 3D geometries, custom-made products or individual parts through to small series parts.

Equipped with modern production machines, Klücher Tech is ideally equipped for your order and offers a wide range of services. Great importance is attached to precision and short lead times.

I would also be happy to manufacture your component according to your wishes

The company was formed in 2001 out of the idea, CNC - programs for sale. It was first performed avocational industry. This idea was the foundation for the later name:
KncP
K = construction
ncP = CNC - programs.
It followed the decision, also yet to be made to the programs parts. In 2002, a used CNC was from private sources - milling machine purchased, the second CNC 2005 - milling followed. The customer base expanded steadily, the avocation supplanted the little free time almost entirely, so that in June 2008 it was clear the decision to full independence. In September 2008, the production profile was through the acquisition of a new CNC - lathe should be considerably extended (CTX 410). Since the order situation remained stable despite the crisis, a new CNC was established in March 2010 - milling machine purchased (DMC 750V with 4th axis).
Other customers were added, bringing the changed requirements of the machinery again.In October 2011, a new high-speed CNC milling machine (microns) was added to the mold manufacturing. For the further expansion of the production spectrum, the second older machine could by a new 5 axis - CNC milling machine to be replaced (Hermle B300U). This project and the purchase of the factory building and the associated land was implemented in October 2012.

We are constantly striving to expand our production profile and are happy to accept new responsibilities and challenges.

Welcome at Koeckert Formenbau

Our company is based in Weiden. We are thus located in the centre of the Bavarian-Bohemian
glass industry which is rich in tradition.
Having been a company family-owned for three generations
we have been judging for more than 50 years each order
as sign of the confidence our business partners have had in us.

All services and supplies made by the Koeckert Formenbau GmbH
shall meet even the most demanding requirements of our partners
and shall be convincing by economic efficiency and latest state-of-art-technology.
Our product range comprises development-oriented activities,
engineering work and the realization of even the largest projects.
It is obvious that we are familiar with the most modern computer technologies
as well as with precise handicraft.

Each of our employees has been trained in our company
and is actively and responsibly taking over his part
at his daily work in order to reach the set targets.
That is not always easy.
However, we will succeed.
Today and in the future.
Thanks to the know-how and the zeal of all employees
as well as to the high quality of their performance.





Production Priorities

Press moulds
Blow moulds
Injection moulds
Centrifugal casting
Diecasting
Injection casting
Model making and single-piece production
Engineering
Design

Perfected mould in view of production and technique

Moulds for the Glass Industry
Press moulds, blow moulds, injection moulds, centrifugal castings etc.
Consumer goods industry Tableware, fancy goods, objects, figurines
Technical applications Glass articles for the lighting engineering industry,
medical engineering
Injection and Diecasting Moulds
Household articles, electrical engineering, consumer goods
and automotive sub-contractors' industries
Model making and Single-piece Production
Production of pilot lots and prototypes, job lots
Materials Synthetic, plexiglass, wood, aluminium, steel, cast materials

Engineering and Design
Conversion of two-dimensional engineering drawings in three-dimensional models,
elaborated manually or computer-assisted
Engineering of the moulds and the tools

Maximum size of workpiece: 1,000 x 700 x 800 mm
Maximum weight of workpiece: 1,000 kgs

KON-FORM tools GmbH is a medium-sized company in the heart of Europe.



constructed with over 50 motivated employees and manufactures
KON-FORM Precision Tools and injection moldings of all kinds,
for various industries.