Sheet metal processing up to 2.5 mm
Punching with trump machine
Edges with swivel bending machines Schröder 4000 mm

Company Description

The company Knauß - metal machining is active in the areas of wire EDM, sinker EDM, turning, milling.

The machinery in tool consists of 3 wire EDM, an EDM machine, 2 CNC milling machines, two lathes, a sand blasting cabinet and a surface grinder.

Our CNC milling, we have a Chiron FZ12 W milling center the opportunity to very large numbers in a very short time coping (pivot table with 4 Vices and fast tool change times)
and a Hermle 900E with the following travels:
X 600mm, Y 400mm, Z 420mm

We Customize falling in our tooling, stamping, embossing and composite tools, 1-gang and multiple.

We manufacture in small and large series, hollow spindle stops, T-Nutensägen, circuit boards, stamps, cutting dies, pinions, gears of all types, gripper jaws, gill pins and all kinds of drilling and clamping devices on our CNC milling and EDM machines.

If they need more information, they are welcome to contact us.
Unfortunately, our web - page is still under construction.

In our modern CAM Programming Course (PC FAPT-Cut i) we construct your Aspruchsvollen Erodierwünsche.

Our customers are found in the following industries:
* Auto, electric, plastic and toy industry
* Plants, molds, machinery, model and tool

Our strengths are:
* Quality and precision
* Short-term and timely execution
* Balanced price / performance ratio
* Customisable care

Services

Versions of any eroding
* Electrically conductive materials and tools of any kind (steel, copper, carbide, aluminum, etc.)
* Gearings
* Erosion of copper electrodes
* Rohplatinen
* Mechanical engineering parts
* Dies and plates for stamping, embossing and progressive dies
* EDM and EDM Hole
* Single and series production part


Difficult workpieces and contours
Some materials - especially the newer ones - can not always be processed with the standard technology because of its composition. Such difficult jobs are not rejected by us. They are seen by us as a challenge we gladly face with vigor and flexibility. Economically, although some trial use is not always feasible, however, our company is thus a certain level of knowledge of which is useful to us in other projects and in the future.

We would be pleased to hear from them soon.

The production of customer solutions in a range of cutting-turning-milling technique is implemented using the German machine and our many years of know-how in a very well-coordinated team in Ukraine.
Thus, several aspects of the customer requirements can be successfully developed and implemented by us. Due to continuous quality controls meet the results of the German manufacturing. The transportation, customs clearance and in related processes are our everyday life and be completely handled by Messrs. V. lever.

Today we are capable to stamp holes Ø 0.09mm (automotive) or death-sharp needles (medical).

• Micro stamping
• Fine blanking
• Progressive stamping
• www.hanggi.com

Here you see only a small range of our specialities of course. We would also like to invite you to a tour in our fabrication for showing you the advantages of our possibilities. For any questions please don’t hesitate to contact us. We are at your entire disposal.

Dear Ladies & Gentlemen,

as a family from the metal-working industry, we want to introduce you to our wide range.
The versatility of possible solutions is one of our strengths and allows flexible solutions to complex challenges.
So we have only the necessary know-how through various practices, such as CNC turning, CNC milling, wire EDM, etc. We combine the latest technology with years of experience and guarantee you reliability and quality.

The company Heinz Knöpfle GmbH was founded in 1979 by Mr. Heinz Knöpfle as a company for special machines. The company is located in Schwabmunchen / Schwabegg, about 30km south-west of Augsburg.

We supply our products mainly to a solid customer base with great success, we would like to introduce our company.

Proof of quality:

Through the coordinate measuring machine Crysta Apex S544 Mitutoyo, we can now also supply with measuring protocol the manufactured parts.


CNC Turning:

With our CNC lathes we can to edit 65mm rotary parts of the rod automatically and completely. The machines are equipped with a 12 - equipped trade revolver and with driven tools. A counter-spindle and Y-axis enables short cycle times and make some cases further machining on a milling machine unnecessary.

We manufacture precise and sophisticated turned parts as individual parts, small or large production runs with short delivery times and consistently high quality.


CNC Milling:

Years of experience, modern production techniques and machining centers, highly qualified and motivated employees are the basis of our performance. This allows us to present the desired results our customers quickly and inexpensively. Working in oscillation mode allows us to equalize loading times and increase output.



Saws:

The basis for a safe and good machining is not only a good material quality, but also a good blank. With our cutting precise cuts are realized with short cutting times. We saw our own production as well as in wages for other companies.

We offer to Sägezuschnitte from € 0.03 per cut.
The range of materials ranging from mild steel on non-ferrous metals to stainless steel.
Our state of the stocks enable us short delivery times for their Sägezuschnitte.


Welding:

In order to offer production from one source, we have a welding robot available.Through this, a constant quality is ensured.


Device & toolmaking:

With our well-stocked machinery and many years of experience in tooling, we are able to create bending, punching and stamping tools. Our fixtures and special machines find their use in various industries.

Depending on customer requirements, we offer ready-made parts or just the tool. The further refinement of the products we take over for you.

The parts production in the field punching, bending and stamping can be held up 150to in-house.



Try us, we look forward to your orders!


Sincerely,

Heinz Knöpfle Susanne Knöpfle Andreas Knöpfle Christian Knöpfle
Management Management Management Manage...

The company Helmut Eltner tooling GmbH is a family business.

They emerged from the company Koser & Eltner which was founded in 1966 by Hans Koser and Helmut Eltner in Main Valley / Wachenbuchen.

After the death of a shareholder, the company was taken over by Helmut Eltner 1982.

It soon became apparent that the old premises did not allow for necessary investments more. Therefore, a 3500m ² plot of land was purchased in 1989 in Kahl / Main and built a 800m ² building, which was purchased in 1990.

The machinery has been since that time continuously expanded, and modernized in order to respond flexibly to customer requests.

In 1996, Dipl-Ing. Ralf Eltner ordered the second managing director, the company is run by him alone since 2001.


Manufacturing Technology

Flach-/Profilschleifen
Rail profile grinding
Wire EDM
Die sinking
Hole EDM from Ø0, 6mm
Gauge Jig Grinding
Milling, drilling
HSC milling
Turn
CAD / CAM

We are a medium-sized company in the metal industry and specialize in eroding technology, CNC-milling and tool production.


With more than 20 years of experience, we offer our clients a maximum of flexibility and technical product Know-how.

Welcome to H & K Metal Processing Ltd.

We are your specialist for tools, sample and prototype, as well as for small batch production!

Tooling
jig
3D machining
3D measurement technology
5-axis simultaneous milling

The HMT Heldener Metal Technology GmbH & Co. KG would like to introduce the Veritas AG as a reliable partner.

Take advantage of the in innovation and quality awareness of our company. We meet all requirements as a certified supplier to various OEM and Tier I.

In recent years, HMT has evolved from a mere supplier of punching, stamping and drawing parts on smaller ZSBs for the boards and smaller modules.

Stampings we can on our existing presses punch (press sizes 60-800 t, table sizes up to 3600 x 1600 mm). We process raw materials such as cold-drawn and hot-drawn and micro-alloyed steels, aluminum and various stainless steels.

Various coatings such as KTL are feasible in the immediate environment at competitive prices.

With the opening of our location in Sroda Slaska in Poland in February 2007, we followed the requirements of our customers manufacturing in low-cost countries.

HoFe Werkzeugtechnik is your reliable supplier for special and standard parts of the highest quality and precision.

Whether cutting, guide or spring elements as well as gas pressure springs and special special parts according to drawings are included in our delivery program and we can deliver them in the best quality at low cost.

Much experience
With more than 20 years of industry experience and decades of experience, we convince our strong global partner.

Many possibilities
We support you with punching, bending and forming tools, as well as with special machine and fixture construction of all kinds with technical know-how.

Lots of trust
We implement your product - you lower your costs and save time with our short-term deliveries. Almost too easy to be true? See for yourself!

From toolmaking to special machine construction - we are more than just a supplier.
We are your close and strategic partner with whom you can reduce your costs and save time.

METAL PARTS MANUFACTURING - TOOL MAKING - CNC MILLING - CNC TURNING - WIRE EDM - DEVICE CONSTRUCTION - ROBOT WELDING

We are a medium-sized company with 30 employees and would like to introduce ourselves in this way. Our main line of business is the construction of stamping and forming tools according to customer requirements. We also offer the cutting of the parts. Many of our customers keep their tools after construction for subsequent punching jobs in our house.

Services:
- Manufacture of complete cutting, drawing and stamping facilities
- Manufacture of cutting and stamping tools to customer / beige presented constructions
- Production of sophisticated compression and progressive dies
- Complete construction and detailing tool design
- Production of pre-series

Our product range:

Tooling:
- Progressive tools simple and multiple ready-catching
- Plate guide cutting tools
- Hole Cuts
- Block sections
- Bending tools
- KombiTools
- L

Converter of adhesives tapes (3M platinium converter)
We can produce parts using:
- roting machine
- laser ploter
- knife ploter
- laminator
- press