Habrama GmbH was founded in 2006 by specialists with over 30 years of professional and industry experience. Since then, our competent team has demonstrated innovative strength on national and international markets. We are already one of the leading companies in the area of development.

h3>PERFECTION THROUGH PRECISION/h3>

Gear wheels are always part of a whole. For big units to run smoothly, the small component parts must fit perfectly and operate flawlessly.



We have been bringing this kind of precision to the "micro" sector for sixty years. We manufacture little masterpieces in metal: spur gears, helical gears, crown gears, bevel gears, worms and worm gears, sprocket wheels, toothed racks and complete gearing mechanisms according to your drawings.



Our speciality is precision-ground gear wheels. That requires professionalism at all levels and the most up-to-date machinery.



No wonder then that our name stands for the highest possible quality at an international level.


h3>YOUR RELIABLE PARTNER/h3>

We are suppliers - and like our products consider ourselves a vital cog in the machine. As your reliable partner, we have high volume flexibility at our disposal, offer short throughput times and guarantee to deliver on the agreed date.



All of this would be impossible without our dynamic team of around 40 people: their specialist skills and high level of motivation are our greatest asset - something we nurture and greatly appreciate.



At the head of the team - and always in the thick of it as well as leading by example - is Daniel Arn, representing the third generation of his family to lead the company. He heads up a family business that has continuously modernised since it was first founded in 1946 and therefore holds a key position in the European market.

Company Description

The company Knauß - metal machining is active in the areas of wire EDM, sinker EDM, turning, milling.

The machinery in tool consists of 3 wire EDM, an EDM machine, 2 CNC milling machines, two lathes, a sand blasting cabinet and a surface grinder.

Our CNC milling, we have a Chiron FZ12 W milling center the opportunity to very large numbers in a very short time coping (pivot table with 4 Vices and fast tool change times)
and a Hermle 900E with the following travels:
X 600mm, Y 400mm, Z 420mm

We Customize falling in our tooling, stamping, embossing and composite tools, 1-gang and multiple.

We manufacture in small and large series, hollow spindle stops, T-Nutensägen, circuit boards, stamps, cutting dies, pinions, gears of all types, gripper jaws, gill pins and all kinds of drilling and clamping devices on our CNC milling and EDM machines.

If they need more information, they are welcome to contact us.
Unfortunately, our web - page is still under construction.

In our modern CAM Programming Course (PC FAPT-Cut i) we construct your Aspruchsvollen Erodierwünsche.

Our customers are found in the following industries:
* Auto, electric, plastic and toy industry
* Plants, molds, machinery, model and tool

Our strengths are:
* Quality and precision
* Short-term and timely execution
* Balanced price / performance ratio
* Customisable care

Services

Versions of any eroding
* Electrically conductive materials and tools of any kind (steel, copper, carbide, aluminum, etc.)
* Gearings
* Erosion of copper electrodes
* Rohplatinen
* Mechanical engineering parts
* Dies and plates for stamping, embossing and progressive dies
* EDM and EDM Hole
* Single and series production part


Difficult workpieces and contours
Some materials - especially the newer ones - can not always be processed with the standard technology because of its composition. Such difficult jobs are not rejected by us. They are seen by us as a challenge we gladly face with vigor and flexibility. Economically, although some trial use is not always feasible, however, our company is thus a certain level of knowledge of which is useful to us in other projects and in the future.

We would be pleased to hear from them soon.

We manufacture installation or storage-finished machine parts according to drawings or samples from all machinable materials. Furthermore, we produce almost any type of gears, milled, or ground encountered. The respective wheel center can be delivered or made by us.

Due to our high manufacturing depth which the complete mechanical processing (such as turning, milling, grinding, eroding, clear) covering, a fast and inexpensive for you to order processing is guaranteed. Quality, on time delivery and customer satisfaction are important cornerstones of our corporate policy. All the work we carry out in accordance with DIN EN ISO 9001.

One of our strengths is the fastest Production of repair parts, which is ensured by a high flexibility of our employees.

The family business founded in 1946, produces with today 75 employees to approximately 6,000 square meters high-quality drive components. Precision and quality - achieved on modern CNC machines, tested and documented - is part of daily business.



Flexibility and commitment of our medium-sized company are known far and beyond the borders of Germany.

Dear Ladies & Gentlemen,

as a family from the metal-working industry, we want to introduce you to our wide range.
The versatility of possible solutions is one of our strengths and allows flexible solutions to complex challenges.
So we have only the necessary know-how through various practices, such as CNC turning, CNC milling, wire EDM, etc. We combine the latest technology with years of experience and guarantee you reliability and quality.

The company Heinz Knöpfle GmbH was founded in 1979 by Mr. Heinz Knöpfle as a company for special machines. The company is located in Schwabmunchen / Schwabegg, about 30km south-west of Augsburg.

We supply our products mainly to a solid customer base with great success, we would like to introduce our company.

Proof of quality:

Through the coordinate measuring machine Crysta Apex S544 Mitutoyo, we can now also supply with measuring protocol the manufactured parts.


CNC Turning:

With our CNC lathes we can to edit 65mm rotary parts of the rod automatically and completely. The machines are equipped with a 12 - equipped trade revolver and with driven tools. A counter-spindle and Y-axis enables short cycle times and make some cases further machining on a milling machine unnecessary.

We manufacture precise and sophisticated turned parts as individual parts, small or large production runs with short delivery times and consistently high quality.


CNC Milling:

Years of experience, modern production techniques and machining centers, highly qualified and motivated employees are the basis of our performance. This allows us to present the desired results our customers quickly and inexpensively. Working in oscillation mode allows us to equalize loading times and increase output.



Saws:

The basis for a safe and good machining is not only a good material quality, but also a good blank. With our cutting precise cuts are realized with short cutting times. We saw our own production as well as in wages for other companies.

We offer to Sägezuschnitte from € 0.03 per cut.
The range of materials ranging from mild steel on non-ferrous metals to stainless steel.
Our state of the stocks enable us short delivery times for their Sägezuschnitte.


Welding:

In order to offer production from one source, we have a welding robot available.Through this, a constant quality is ensured.


Device & toolmaking:

With our well-stocked machinery and many years of experience in tooling, we are able to create bending, punching and stamping tools. Our fixtures and special machines find their use in various industries.

Depending on customer requirements, we offer ready-made parts or just the tool. The further refinement of the products we take over for you.

The parts production in the field punching, bending and stamping can be held up 150to in-house.



Try us, we look forward to your orders!


Sincerely,

Heinz Knöpfle Susanne Knöpfle Andreas Knöpfle Christian Knöpfle
Management Management Management Manage...

Henschel KG is almost here everything you need for production and can be made of machineable material.

Dear,
In the annex you can find company presentation from Hira-Parts.
We are a company work with countries like : Germany, The Netherlands, Belgium, England, İerland and Romania.
HİRA-PARTS FOR YOUR MECHANICAL OUTBREIGHT
Hira-Parts is a reputable supplier where you can go for outsourcing in the field of
Engineering, Mechanical engineering, Construction work, Sheet metal processing and Machining of metal components in small and large series.
PRODUCTION IN TURKİJE - LOW COST, HIGH QUALITY
The entire production of your hira-parts takes place at the production facility in BURSA - TURKİJE. The reason for this location has everything to do with the advantages in the area of low labor costs which obviously have an effect on price formation. Hira-Parts carries out the production of your parts with a modern machine park which you can certainly find in the .
CNC DRILLED MACHINES FOR TURNING AND MILLING
The machining mainly takes place on CNC-controlled machines that are set up in a separate room. Due to the flexibility we are able to realize your outsourcing of turning and milling work with short lead times. If required, we can deliver your orders in partial deliveries to speed up the turnaround time for you as a customer. The outsourcing turn and milling work can therefore be tailored to your wishes.
ASSEMBLY
In order to increase our added value as a supplier, we can also carry out the assembly of semi-finished products for you. Parts of metal or plastic processed by us or supplied by you can then be assembled with other components.
That saves a lot in man hours.
THE ADVANTAGES:
• Due to the low wage costs, we can achieve a favorable price level.
• Dutch, English, German, point of contact.
• Brokerage firm, so do not push up prices.
We thank you for your interest in our company, and we look forward to a long-term cooperation.

Best Regards / Met vriendelijke groet / Mit freundlichen Grüßen

Ali Bahadır Oral
Production & Sales Manager



DR.Ziya Kaya Mahallesi
Yayla Sokak NO: 2 Daire : 8
P.K : 16600
GEMLİK / BURSA - TURKEY

GSM : +90 543 369 12 77
Web : www.hira-parts.com
E-mail : alibahadir@hira-parts.com

Hofer + Co produces for you
fast and flexible
Precision turned parts

Dear Ladies and Gentlemen!

Our company is doing business Kft Holes in the plastic circle since 1991.
We process and sell engineering plastics as semi-finished products.
The export and import to our very well prepared office and logistically support team with the utilization of the modern time-averaging.
The 8 CNC turning, milling and 10 standard machine and the measurement laboratory are in two-shift operation in use.

Our clients (Audi, Bosch, Phoenix Mecano, Coca-Cola, Claas, GE-Tungsram, Knorr-Bremse, MÁV, Mediagnost, Mediso, Raba, Robot-X ....) entrust us with annual framework agreements and orders.

We produce both simple and very complex parts from what supports our CAD-CAM systems.
The owner Mr. Gábor Holes approximately 25 years engaged in the use range of engineering plastics based our company on the free professional advice.

Our material is specifically with ZX-Brand Name (ZEDEX) sliding bearing material (ZX100, ZX324, ZX410, ZX530 ...) dominate excellent tribological properties.
Each variety has different temperature resistance and flechenpressung.

CosTherm the acquisition is new and a new development area of hard tissue.
The material is mainly ideal for heat and electrical insulation, additional properties have some varieties and very good sliding properties.

More than 20 varieties Engineering Plastics, (PA6G, PA6.6, POM, PE, PP, PVC, Plexi, Polycarbonate, PVDF, PEEK, TEFLON, BAUMWOHLLHARTGEWEBE, EP GC 203 .....) hold different dimensions, dimensions and color, we stock.

Certified Our company since 2005 with ISO9001 and operated.

Gábor Holes
Owner
HOLES Kft

Holtech, your specialist for drive technology


Holtech Antriebstechnik GmbH & Co. KG from Schloß Holte-Stukenbrock is the partner for medium-sized companies in the areas of mechanical engineering and plant construction (eg, wood processing, furniture, food, packaging, automotive), connecting and conveying engineering and special engineering. We recommend as your supplier for Erstausrüstungsbedarf, for repairs and maintenance.

Our stock range includes a variety of racks, spur gears and bevel gears as well as additional components such as shell couplings, clamping rings and clamping sets.

In addition to our extensive stock range, we offer the machining of standard parts, heat and surface treatment as well as complete custom. Technical know-how and the highest level of customer focus and reliability set us apart. And when can we become your partner?

For your inquiries please contact us at the 05207-995650 available.

COMPANY PROFILE


HELLMERICH is the market-leading specialist in multi-spindle heads, precision components and precision parts for the machine tool sector. International and highly reputable machinery companies in the volume industry have been drawing on HELLMERICH’s skills for decades.

HELLMERICH’s core competencies, engineering, design and the production of high-quality multi-spindle heads, are the result of 30 years of experience. Durability, reliability, maintainability and environmental compatibility are constantly enhanced in the process to ensure the greatest benefits for customers.

The high level of in-house production results in projects being implemented promptly and on an individual basis.

Since it was set up in 1979, HELLMERICH has continually met the increasing requirements of its customers with comprehensive quality management.