IV Metall is an owner-managed, independent company.

The location in Nachrodt-Wiblingwerde in Sauerland characterizes a traditional, regionally producing but also a modern, globally operating company. Our benchmark is the market with its requirements

The main area of responsibility lies in the design and manufacture as well as in the trade of technical springs of all types.

From layout and calculation, to sample delivery and series, including all the documents required by the customer, delivered in the packaging you require. We earn the trust of our customers through the quality delivered and the service provided.

This gives us the chance to win new markets.

Traditional values determine the behavior of management and employees.

Mutual trust, fairness, respect, reliability, honesty and personal responsibility are company philosophy and lived reality. We are aware of our responsibility and obligation to our employees, business partners and market participants and aim to continuously develop the company, to maintain the company's innovative strength and to ensure the social security of our employees.

The result of our good work should not be defined solely by the increase in growth and prosperity, but we also want to burden our environment as little as possible and be socially committed.

Stamping and forming technology
Toolmaking
Assembly production

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

www.komot.eu

Series manufacturer & automotive supplier for stamped and drawn parts
made of various materials (including 1.4301, 1.4841, DX + Z, DC X, HC, ALU)

It all began with Cleophas Lang...
Shortly after the war, Cleophas Lang founded Lang Metall und Vertriebs GmbH in Munich near Ostbahnhof. The company's main business was chrome-plated parts for the automotive industry.

In the 1960s, around 130 people were already employed and the company moved to Korbiniansplatz in the north of Munich.

In 1974, the company moved into new production facilities at its current location for around 50 employees.

In 1992, Lang Metallwarenproduktion Neubrandenburg GmbH was founded in Woldegk. An old plant near Webasto AG was purchased and rebuilt according to modern criteria. Since 1993, stamped parts and drawn parts for industry have also been manufactured in Woldegk.

In 2011, we received the MAN Truck and Bus Supplier Award for our commitment.

Webasto honoured both companies with the International Supplier Award in 2012.

In 2016, the company in Woldegk became a finalist in the Grand Prix for SMEs.

METAL PROCESSING2
At two economically separate sites in Garching and Woldegk, we produce stamped and drawn metal parts. Through close cooperation, customers of both companies benefit from many years of knowledge and a high level of flexibility.

The partnership orientation also plays a decisive role in our customer relationships. We support you right from the development stage and guide you on your journey from CAD to process-reliable series production. This customer focus and lean structures are characteristic of our economically healthy companies.

Just like our customers, we place high demands on the quality of our products. Continuous new purchases ensure the use of the latest technology. Through continuous personnel qualifications, we achieved a high standard that also exceeds the requirements of German premium brands and has already been recognized several times through supplier awards.

Limrol is a company that has been operating since 1996. We deal with roofing, sheet metal accessories, sheet metal bending up to 7 meters, waterproofing, locksmithing and metal processing with lathes, cnc punching and metal cutting up to 20 millimeters.

Matrices y Moldes JFM specializes in the construction of tools and cold stamping of metals. We work in a wide range of sectors: automotive, consumer electronics, construction, air conditioning, packaging, leather goods, naval and railway, among others.

We develop our products alongside our clients, which allows us to provide an excellent price-quality-service ratio, always striving to meet their needs. We operate internationally with up to 55% of our sales exported abroad.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day.

In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific.

In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations.

1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country.

The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia.

Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company.

With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions.

Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular.

There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products.

In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

We support you from product idea to economic product implementation. We focus on competent advice and the development of cost-effective alternatives.
Our quality awareness in accordance with DIN EN ISO 9001:2000 is the focus of our daily work. Even when developing products, we pay attention to progressive and sustainable documentation.
Production and surface protection of fan covers and ventilation systems for general mechanical engineering, commercial vehicles and railways as well as steel furniture and ship window boxes for seagoing ships and stationary systems.

Metalonica PC has been in the service of industry for more than 40 years.
The main expertise of the company focuses on manufacturing and repairs of industrial parts and equipment.
Industries include, steel mills, cement factories, oil refineries, paper mills, food industry and many more.
The company has a variety of CNC and conventional machines varying in sizes and capabilities, including lathes, milling machines, boring machines, balancing machines and a lot more.

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities.

Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Paolo Inglese Spare Parts GmbH is a system supplier in the areas of sheet metal processing, steel construction and special construction. In addition, we produce filter systems for machine tools under the brand name Seitz Filteranlagen.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials.
We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more!
We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

Special Metal Srl is a Company of AIOLFI Group.
Special Metal is the branch of AIOLFI Group operating in the steel working field, industrial and civil works.

For industrial works, we have a high expertise on:

Structures in Stainless Steel and Carbon Steel, Structures for Machinery, Carter, Canopies, Forklift, Work Plans, Pre-assembly of Mechanical Units, Covers, Shields,


For civil works, we have a high expertise on:

Stairs, Gates, Doors, Railings, Mezzanine Floors, Gratings

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

The TDF Steel Kft, a Hungarian-owned medium-sized business, is specialized in steel processing and
manufacturing of steel structures and components for construction machinery. Our facility is located
about 160 km from Budapest, easily accessible by motorway M5/M44.
Our work is founded on a very strong technological basis with many years of manufacturing experience.
Due to the continuous and successful marketing activities TDF Steel has established well operating
business relations to a number of customers from abroad. As a result we deliver 95% of our products to
the European export market.

We are proud to cooperate with some of the well-known machine building companies as CNHI/FIAT,
Günter Papenburg AG, Henschel Antriebstechnik, Neuson-Forest GmbH to name just a few.
Our main goal has been for the last two decades to meet the requirements of our business partners by
continuous technological development and improvement of the product quality. Our Quality
Management System is certified according to the MSZ EN ISO9001:2015 requirements.

Focusing on our outstanding manufacturing knowledge and skills, ongoing improving our quality
standards, TDF Steel is a reliable business partner and supplier for the machinery industry.
Our product range includes: welded constructions, machine frames, beams, arms, levers, dozer blades,
housings of cast manipulators, etc.

Our production performs following metal working procedures:
· shot/sand blasting
· flame/laser cutting of steel plates
· bending/rolling of sheets
· welding with protective gas both manually and robot controlled
· machining as turning, milling, grinding, boring
· surface painting applying ground and finish coat
Please refer to the additional information about our machine capacities below.
After the final quality control our products will be packaged appropriately and so are ready for the
shipment to the customer.
We trust TDF Steel can fulfil your expectations and soon become your reliable component supplier.

Please send us your enquiry and we will be happy to answer your request or give you additional
information.Metal sheet processing from 2 mm to 150 mm thickness
Thermal cutting process(laser, plasma and flame cutting)
Bending
Welding
Manufacturing
Painting
Assembling

As a medium-sized, family-run company, we have been manufacturing metal components and metal assemblies for over 25 years.
Our customers include well-known shop and object builders, and we also manufacture components for metal and mechanical engineering.
In cooperation with our customers and partners, long-term relationships are created that are based on mutual trust and technical understanding.
As a high-tech company, we take on all tasks for you, from design and production, whether hand sketches or 3D models, from prototype production to series production. We are at your side with all our experience and know-how in metal technology.