KST ball-blasting technology GmbH has over 25 years of service in the field of jet technology and currently employs 30 staff with the implementation of various tasks.

To implement stand equipment (blower or compressed air blasting machine, continuous or Tumblast machine) for bulk, hanging garments or long material.

The service portfolio is broadly diversified in terms of the wide variety of blasting agents and procedures.

Deburring
Glass bead blasting
Steel beams
Sandblasting
Abrasive Blast Cleaning
Shot peening

We are the German sales company of the KUAN YI Group.
The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia.
We take care of customs clearance and fast delivery within a few days from our production sites.

Are all types of wet painting and sandblasting offered, just contact us

Company LAMPIC is located in the middle of Slovenia, Ljubljana. More than 45 years of plating experience with new anodising line in 2012.

Chemical Machining SpA manufactures components by chemical photo section and laser micro cutting
Founded in 1970, CM is one of the pioneers in the market of chemical etching and has become established and maintained by steady growth and quality improvement as the market leader in Italy.

Practice Areas
• Electronic and Electrical Components
• Medical
• Telecommunications
• Automotive
• Optical Industry
• Fashion Industry
• Seals
• 0-series and prototypes

Product Portfolio
• EMC components
• SMT STENCIL films
• SMT STENCIL complete screen frame
• Electrical Connectors
• Model
• Filter
• Design elements
And much more!

Advantages of the photochemical etching
• Production of components of a sheet thickness
possible between 0.01mm to 2mm.
• It can convert almost all metals processed
will.
• Complex contours at no extra charge.
• The complexity of a component is independent
of the process time (production time).
This is only by the material thickness
influenced (cost neutral even
for complex contours).
• The components do not have a degree.
• There is no distortion due to thermal
Action.
• No tooling costs and fast
Delivery of the components.
Product Specific
• By half-etched fold lines can
flat sheets into three-dimensional components
be bent.
• The number of holes, holes,
or breakthroughs has no influence
on the process time.
• The body edge differs from
a punching / cutting edge.
• The etching process is taking place simultaneously on
two component pages instead.
Flat sheets can be bent by half-etched fold lines to three-dimensional components.

Industrial Engineering:
Realization of sheet metal parts and mechanical function ASSEMBLY
Design office and sheet metal mechanics

The company Lehmann Zerspanungstechnik, based in Berlin-Reinickendorf, was founded in 1974 by Mr. Paul Amann and sold to Mario Lehmann in 2016.

We have modern CNC technology and systems to realize individual productions. We manufacture one-offs, prototypes or small series from steel, stainless steel, aluminum and plastic. The fixture construction and the preparation of technical drawings are also part of our range of services.

With us, you as a customer and your wishes are the focus.

We focus on quality instead of quantity and guarantee you reliable service from the offer to completion.

Dear ,

Let me speak with this brief presentation of the company Leistritz Turbinenkomponenten Belišće doo, a Croatian subsidiary of the German company Leistritz AG

With regard to the similarity of our activities in the metal industry, the processing of metal parts for the aerospace, automotive and mechanical engineering industries, we offer you the possibility of business cooperation.

In our factory in Belišće we carry out the following operations and manual processing:
- Deburring, grinding with belt grinders
- grinding and polishing
- High-energy vibratory grinding (barrel with 2 Walther Trowal machines)
- Visual inspection
- Dimensional check - 3D CNC measurement (Global, Brown & Sharp - 4 devices)
- 3-axis NC milling (1 piece MAHO 600)

We have significant experience in the processing of blades and metal parts for all major manufacturers of jet engines and steam turbines such as Rolls & Royce, MTU, ITP, General Electric, SIEMENS, Pratt & Whitney.

As a reliable, high quality and certified supplier, I would like to offer you our services and make them available to you.

For a more detailed introduction and presentation, we will be personally available to visit you at the company's headquarters.

Waiting for your reply!

Best regards,

Atila Kerekeš, ing. / Zoran Pepić
Quality manager / production manager - procurator

Leistritz turbine component Belišće doo
Trg A. Starčevića 1
31551 Belišće, Croatia
Tel .: +385 31 662 656
Fax: +385 31 662 683

How can we help you?
That's our way to say we are here for you to serve you as customer.

Lentink founded in 1958 has grown into one of the leading suppliers in the field of high tech sheet metal.
Deep drawing, pressing with transfers and progressive tools are our daily business. We deliver on daily base to our customers and we have to take care for more than 10.000 articles around Europe. With or without powdercoating and as simple parts and assemblies.

Quality and reliability are our daily goals with our people.

With over 60 years of experience, we manufacture large and small products in small and large series for different markets, sectors and industries in Europe. Companies like Bosch, Vaillant, Brötje and Buderus have also find their way to our company.

This is facilitated by a wide equipped machine park consisting of-the-art technologies as well as by the daily commitment of more than 125 enthousiastic technical specialists.

Processing of steel parts with many features and Lentink would like to advise you about your products as well.

If you want to know more about sheetsteel possibilities; please feel free to contact us.

Ronald Pool
tel: 0031-611780352
WWW.LENTINK.NL
Tel: 0031-315382130

HIGH PRECISION MANUFACTURING

Please send your inquiries directly to us by e-mail at info@linearis.sk.

We are engaged in the production and processing of mechanical parts and components according to Erforderung of customers.

For production we use CNC machines and machining centers.

We manufacture in our factories all turning, milling, welding and grinding parts of small dimensions up to large steel structures.

For some customers, we make complete assemblies incl. Installation, which will also be run with us. Materials such as steel, aluminum, zinc and copper are used daily by us.

Our main profile:

Powder coating

Precision Sheet Metal

Punching, cnc

Component manufacturing

Corrosion protection

We offer a complex service: - Planning the production of the components ponents surface treatment.
Our company started as a small family business in 1997.

The company started its production in a 300 m2 building with only an oven for powder coating.

Today we have a 11,000 m2 - Production line with a 2000 m2 hangar.


In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side.



Due to our high quality standards, we were able to build long-term relationships with both national and international partners.


Our company still operates as a family business, which helps us to keep administrative costs and our prices low.



To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises.



Our goal is to offer perfect services to our customers. Iso 9001 wiki

LINHARDT toolmaking, come to us - whether with data, a sketch, a technical drawing, a picture or a workpiece. We help you! Milling / turning / eroding / grinding / assembly

We focus on developing and producing high-quality, pre-finished parts, components and systems of metal, which are available also, including industrial surface treatments.

For this purpose, stand 15.000 production areas in Germany and low-wage countries.

With our experienced staff and a held on the current state of the art machinery, we provide for each task within our manufacturing range a solution - fast, flexible
and cost-conscious.