The "Officina Meccanica Gualco" has been working in the metal industry for 40 years and is specialized in
Turning, Milling, Threading, Broaching and Wire-EDM.
These areas are supported by a technical office equipped with CAD-CAM stations for design and calculation of
tool paths sent to the machinery.
With experience gained over decades of activity, we are able to manage the processing and production of a wide
range of mechanical components from 10 mm to 450 mm in diameter, with lengths up to 1200 mm.
We work in stainless steel, all the 300 and 400 series, and other types of materials such as: Alloy steel, Aluminum
and its alloys, Copper, Brass and bronze, Plastic, Super alloys and cast iron.
Quality control is the primary strategic objective of the production process and guarantees requirements met for
each product component.
Each step of the quality control process is verified by the instruments most suitable for a particular control.
Among our measuring equipment, we count a portable arm CMMs which is an accurate gauge. This tool allows
us to optimize the processes of control and dimensional analysis processes and moreover gives us the
opportunity to compare the opportunity to compare the products with the related technical drawing.
To provide the best service we follow the details of all manufacturing and production processes, from raw
material to finished product, taking advantage of partner companies to perform operations such as surface and
heat treatment, grinding and painting.
Our philosophy is expressed through passion for our work, innovation and reliability.
Customer satisfaction, the addition of support and ancillary services, and analysis and solution of problems set
us apart from other competitors in the market.
On the basis of the policy pursued, we have achieved ambitious goals, among our references it is a prestigious
factor to mention the Politecnico of Milan besides important names of Made in Italy for the chemical,
electromechanical, packaging, furnishing, health care, Industrial handling, oil & gas, motorcycle and
Shipbuilding.
We invite you to visit our web site to learn more about our company.
Thank you for your attention, we are waiting for your interest in this.
Team Officine Gualco
Mario, Licia, Werner and William

Officine Longon Srl is a company located in Maser, close to Venice and we are specialized in the manufacturing of components for the furniture industry.
Our expertise and problem-solving attitude allow us to be extremely flexible and versatile and to offer customised solutions.

Officine Parolin is located on the North East of Italy.
We employ 18 people and are specialised in the wire, tube, and stamped sheet processing.
Our core business has been the welding since 1985.
We mainly work on projects and drawings supplied by the customer.
Our flexibility enables us to offer many sorts of customised products:
from furniture, sport equipment, up to lightweight construction.
We work the following metals: Steel, Stainless Steel, Aluminium.
The cooperation with local partners grants us to supply the following services:
painting, galvanising, sating, anodising and other surface treatments, laser cutting on sheets and tubes.
The company is certified according to ISO 9001:2008 standards.
Small quantities to process is not a problem for us!

Welcome to Ohms Edelstahltechnik from Lügde. We are your strong partner in the field of stainless steel processing. As an owner-managed family business, we have been cultivating tradition and innovation since 1969. We are a master craftsman and a recognized training company. In our daily work, we attach great importance to quality and rapid implementation.

As a specialist company with many years of experience, we have a great deal of experience in the field of stainless steel processing. We rely on a high-quality machine park, which enables us to achieve the highest level of precision and quality. Our specialist staff, which consists of a total of nine experienced employees, is at your disposal for all your wishes.

Manufacturing and service program:



Construction, retail manufacturing, mass production of steel components, stainless steel components, light metal components and their assembly and repair. Manual operations in the wage. Small steel construction



Customer structure:



Automotive supplier industry, housing and construction companies, architects, local authorities, craftsmen, private customers

OMB Metalltechnik GmbH & Co. KG is an owner-managed, medium-sized company in the field of welding technology and metal processing.

We have been providing manufacturing services for well-known companies for over 20 years.

We are certified according to DIN EN ISO 9001: 2016 and DIN EN ISO 3834-2: 2006.

Machine enclosures, cabinets, welded assemblies made of steel, stainless steel and aluminum - the omega sheet metal working GmbH sees itself as a system supplier for mechanical engineering.

Concretely, cover from the first sketch through 3D design to finished product, the entire value chain.
In between processing steps such as laser cutting, punching, nipples, bending, welding, riveting, assembling, powder coating, wet painting. If desired, the OMEGA products are also completed with electrical, mechanical and hydraulic components.

Flexibility, quality and punctuality is crucial and is achieved through close cooperation with the partners. This in turn is a demand for all times to meet with his counterpart "on equal footing".

Design and manufacture of a hand in the sheet metal.
Apparatus and tank made of stainless steel to 100,000 liters. Pressure vessels, complete systems, design and manufacturing.

we are active in engineering production for foreign customer, according technical documentation.

We produce a various steel parts as are steel constructions, welded parts, machined parts ( steel tanks, steel pallets, storage equipment, parts for car lifts, docklevellers, shafts, flanges, steel frames, dipper buckets for excavators - various shapes and dimensions, etc. Our production - 100 % goes to foreign customers only. We prefer long term relationships and serial production.

We produce complete industry spraying mortar machines for Austria customer too, include water system, electric system etc.

We are among the most important suppliers of products for the first use, mainly intended for manufacturers of tractors and heavy vehicles sector. Our production is based on the processing of components in full supply of steel,cast iron and raw with the primary objective of meeting the needs and expectations of the customer, through a continuous improvement of the product and supply systems, applying inside the 'Company Total Quality’.
OMG has developed steadily over time its technical and industrial capacity and is the undisputed leader in the production of customer-specific:
Axle shaft
Transmission shaft
Planet carrier boxes
Wheel axles
Exhaust manifolds
Differential boxes
Splined shafts
Front and rear wheel hubs
Reduction casing box
Steering control levers
PTO Casing
Brake piston
Steering knuckle
PTO Shaft
Wheel forks
Flession bars

OMG is today on the market as a supplier able to offer not only work, but a complete service that can start from the purchase of raw materials and ends with the supply of machined and assembled units.
Production processes related to OMG machining are:
Turning
Teeth /Hobbing
Milling
Drilling
Boring / Reaming
Broaching
Grinding
Induction Hardening Threatment
Mechanical assembly
Washing

I normally processed materials are: cast iron, steel.

Omme gears Srl is one of the main central Italy producers of mechanical gears and which has been present in the power transmission field for more than 50 years.
It is specialized in the production of gear wheels and gearboxes (cycloidal, epycicloidal and parallel axes) parts suitable for various applications and industries.

Today, as yesterday, the company’s structure successfully responds to the specific production requirements and personalized customers’ projects: vast flexibility, co-engineering and short delivery lead time are the goals we are aiming to achieve maximum satisfaction of our customers.

Among our clients we are proud to mention some of the leading companies in the fields of gearbox production, construction of railway vehicles, earthmoving equipment and agricultural machines, ship building industry, wind power plants, heavy industry, mining industry and others.

The company operates in total autonomy on all phases of production; the production unit covers an area of 4000 mq and is composed of turning, milling, drilling (where required), gear-cutting (both external and internal), hobbing and grinding. A test room, supplied with modern electronic equipment, provides a quality control to vanguard. Highly specialized staff is able to verify the perfect conformity with the specifications by checking the progress of ongoing processes.

The wide range of our products and services includes:
• external straight spur gears and helical spur gears from mod. 6 to mod. 30
• internal straight spur gears up to mod. 12
• pinion shafts and splined shafts from mod. 6 to mod. 30
• tang slots and splines broaching
• key seats grinding
• grinding of involute profile up to mod. 22
• turning and milling, internal and external grinding
• production of spare parts
• design and construction of complete gear reduction units

Orfanidis Anastasios, having ORMIT as its distinctive title, from the early years to today’s rapidly changing environment, maintains a history of continuous effort, challenges, and evolving technical experience. The company started operating in 1991. Over the years, it has been transferred to privately-owned facilities in the Drimos, Thessaloniki. Since then, the company has begun its investments in the CNC machines sector, starting the course towards a higher level of technical knowledge and experience, as well as a higher degree of flexibility.

Family business with over 30 - year tradition
We manufacture the following tools:
Toolmaking
-Follow-on composite tools
Punching tools
Molding tools

Forging and machining of forgings