Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Bottazzi Srl has been working in sheet metal, iron, stainless steel and aluminum processing for over 35 years, specializing in the home appliance and furniture industry. Production: from small batches to large series deliveries, including using a Kanban system. Since 2002, the company has renewed and maintained the UNI EN ISO 9001:2008 quality certification.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

In 1999 Crainox was founded with the aim of working only with stainless steel products. The strength of Crainox is the ability to manage complex carpentry projects and the various mechanical processes, including finishing. This ability allows us to be an all-round partner capable of offering a complete package of products and services in the various industrial fields in which stainless steel is used. From the small artisan company of the origins with 4 workers, today the company has 75 people in addition to a network of subcontractors, who work almost exclusively for us, which has about 20 people.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

Welcome to MV Blechbearbeitung ! In the north of germany we are Your reliable partner for laser cutting ( sheets an tubes ), punching and bending, Milling and Welding up to ready-to-use constructions. The welding workshop with its high levelled qualifications will meet Your requirements - certified acc. ISO 1090 EXC 3 for steel, stainless steel as well as aluminium. MAG, WIG manual welding, laser welding upto 5 mm, robotic welding up to 500 kg piece weight at highest quality level.

We bring metal into shape! Your specialist for metalworking & production of complete assemblies About us: We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components. Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

1872 from an idea a reality. With the production of locks, Africa godfather and machetes, the company founder Heinrich Schmidt took the plunge into self-employment. The company produced for the domestic needs and for export to the whole world. The delivery was carried out under its own and also under the trademark of exporters. 1925, the mainstay of Agricultural Engineering was established. In particular, agricultural wear parts have been made for tillage. These were among other things, grubbing shares, cutting blades, angle coulters, ridging etc. of the leading manufacturers of agricultural machinery. In the whole of Germany and western Europe were and are these products their application. Since the 60s, the range has been expanded by the introduction of the Sheet Metal and processing and the production of animal traps of all kinds. The pressing, stamping, punching and bending parts are produced mainly according to customers drawings and samples and finished or coated as desired. Our forward-looking machinery is constantly being improved by new machines. The guarantees with experienced and trained personnel for highest precision and quality in the entire manufacturing spectrum. Through our research and development department, the products of a design verification are subjected. Here, the product or the working process is developed as needed. In August 2008, we have our machinery increased by 2 other press lines. Press forces up to 400 tons. and a material width up to 500 mm are no problem now. This also sets with up to 100,000 pcs delivery lot can now be made efficiently.

Laser cutting sheet metal and profiles, welding work, steel, stainless steel, aluminium

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. . Batch size 10-100000 pcs Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package. Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig. The bodyshop directly in the annex building permits without long transport routes to paint the machine components. Our strength is flexibility and performance! At this point you will get an overview of the company MUZ mechanical engineering and machining: Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time. We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics. Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly. Come to us if you are around a professional partner ... Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining. Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service. We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths. Achieving total customer satisfaction, but we work with our more than 80 employees every day. In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

Since 1964 Giacomazzo Agostino Srl has been specialized in the design and construction of industrial plants, autoclaves, mixers, tanks, special filters and other custom made solutions. All our products have the CE certification as well as PED and ATEX certifications if needed. Thanks to our wide machine park and the broad expertise of our workers we can advice the best solutions to our customers.

Punching and metal forming since 1939 The company was founded in 1939 Hohage in Halver and is still family owned. Since 1998, we develop and manufacture 2,200 m² at our location in Kierspe. With about 20 employees will be produced there in close cooperation with our customers in industry and commercial products of stamping and forming and building hardware and hinges. Lean structures and short information paths lead to customer-oriented thinking and acting. Parts are timely developed and manufactured inexpensively and with high quality standards. Our own design and own tool help to create a quick and smooth transaction. Scharniertiel, hinge elements, Stampings, holder, assemblies, ... Talk to us, we are here for you. Zeichnungsztiele, Stampings, Parzielles fine cutting, tapping, stainless steel parts, Prouktentwicklung, house design, house tool, DIN ISO 9001:2008 In the past we have made: Hinges, narrow, semi-wide, Käntig, Tischbänger, chest straps, Embossed hinges, Profielscharniere, Kreuzgehänge, Werfgehänge, shutter hinges, hooks, brackets, Winkelberbinder, chair angle, wide angle, angle of rotation, furniture elbow, tee-angle, connecting plates, wood connectors, joist hangers, flat connector, elbow connector, box fittings, box handles, container fasteners, box - protective corners, br