High-quality and extensive range of products in sheet metal forming and sheet metal work form the solid foundation of August BERTRAMS GMBH for many decades. Due to the personnel and equipment performance monthly 1200 tons of material are currently being processed in our sheet metal processing centers in Cologne and the Thuringian Berka. Through the use of CNC punching machines, 3-D lasers, CNC shearing, CNC press brakes, MIG-MAG, spot, bolts and resistance welding equipment single parts are manufactured to the finished part. Order processing, production planning and construction are performed with PPS, CAD and CAM. All areas are subject to the quality management system.

The chub electric heat GmbH is your competent partner for development, production and sales of electrical heating elements made of copper and stainless steel various designs for energy conversion and solar technology. As a service provider for electrical heat generation, we are an established and reliable partner for your technical applications. Our product engineers will be fully responsible, creative and solution-oriented. Our in-house tool enables us to quickly and flexibly to your wishes. The production is continuously adapted to the new challenges to an efficient process design. The staff are highly motivated and well trained. Thus we are able to meet the ever increasing market requirements and to realize the customers their specific solutions on time and to quality standards. In addition to active consulting activities of our own sales department you are knowledgeable and powerful distribution partners throughout Europe, andalia in Poland, Austria, the Netherlands and Hungary, are available. Take us at our word! Give us a try! Our Products: Liquid heating: round tube radiators of copper (hot water tank, auxiliary heaters for boilers, boiling water heaters, water heater), round tubular heating element (flange heater, heater for steam generators and temperature control, immersion heaters, Indirect heating of stainless steel containers), flat tube radiator, ceramic column radiators) Air warming: fin tube heaters, heater Tool heating: round tube radiators cast in aluminum, cast iron or bronze alloy, surface Heaters for vacuum coating systems, high-performance cartridges to tool cartridge heaters, Mikanitheizungen, ring heaters Radiation heating quartz tube heater, infrared heaters Special barbecue or fireplaces,

Bosch Rexroth: Drive and control solutions from Rexroth fill jam breakfast and support the printing of the daily newspaper. Manufactured on the way to work in the car, engine, gearbox and body with Rexroth technology, we drive past fields where farm machinery using Rexroth Hydraulic order the fields of wind energy farms with Rexroth transmissions and building sites where excavators and Bulldozers with Rexroth components work. In the machines in the factories, furniture and computers in offices, in short, in almost all industrial products Rexroth has contributed to efficient production. This is also true for cultural events: Move Rexroth automation solutions and control the stage techniques of the most famous opera houses and theaters in the world. This wide range can cover with tailored solutions Rexroth is only because the staff are always open to new ideas and are always looking for better solutions. Location Erbach: At our location in Erbach im Odenwald, we manufacture System components for the controller, operation, visualization and PC-based control solutions, control systems for resistance welding and mechanical Komponeneten, here especially housing, which are nibbled without cutting of sheet metal.

Roller presses, Moist, crushing, Shredders, industrial grinders, Calcining

We have always, whether in the past and on to the future, believed that any significant changes can happen, only if something is actually done to made it happen Therefore and based on this belief, the future of MIRALAGO has always been targeted, by placing ourselves in a respectable position by offering products and services that enhance and add to the image that we all want to achieve. In following the current trends, we are prepared to offer to all our Business Partners new working tools, like catalogues and this Web Page. We hope that they can create stronger connecting chains to ALL.

h2> Success- now and in the future /h2> Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality. Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.

For over 30 years the name Körber is in the area of cutting and manufacturing of sheet metal forming for the best possible quality, with maximum precision. Essential prerequisites for a long-term market success today are in addition to high flexibility, the willingness to implement technical innovations by investing in the operation, of course, qualified and dedicated employees. These conditions are met, the Korber Precision Engineering GmbH in an impressive way. In our commitment and reliability you can count on. The consistent use of CAD in the construction is the basic requirement for the diverse manufacturing needs of our customers for us. Together with our strong partners we are a competent partner for complete system solutions from the zero line to the finished series product, including surface treatment, assembly and screen printing. A continuous effective cooperation with our customers is the guarantee for the production of an individual and reasonably equitable quality product. Of course, we can also advise you in choosing the right material and explain to you the best product for your manufacturing process. Have we piqued your interest in the company Körber precision engineering GmbH? We are always happy to help.

Metal Spinners Group was formed in 1953, dealing with both national and international customers on daily basis by providing innovative metal forming solutions. We have the widest range of metal spinning capabilities, spinning a wide range of materials and sizes from bullet 10mm (less than 1/2") to 4250mm (almost 170") in diameter bullet less than 1mm (1/16") to over 40mm ( 1 1/2") in thickness Utilising our 'added-value' operation facilities, we offer a "one-stop-shop" service from inception to production.

Blank diameter max. Hand Press: 1200 mm Press machine: 800 mm

Manufacturer of timber connecters. We hava a 1.250 mm cutting line, stamping machines and a tool department.

Production of assembly jigs and fixtures / Production of tipper semi-trailer / Production of Automotive component parts and doors / Production of Construction equipments

The FLAMMMOTEC GmbH & Co. KG was founded (formerly STAN DRAWING, since 1954) 1993. We manufacture in the works of Berlin and Nauen stamped and drawn parts, primarily for the automotive, white goods and electronics industries, primarily in the United series. Other strengths lie in the field of manufacturing of components. We specialize in die-castings of medium size to large stampings (pressing force of up to 16,000 kN). Our stamping presses and transfer presses have table sizes up to 5200 x 2300 mm. The manufactured parts have up to 13 kg in weight and up to 1 m². In addition, welded assemblies are produced on a modern 6-axis welding robots (1 m³ action space, part weight up to 1000 kg) and spot welding machines. Production Our parts range covers all types of forged parts in all grades of material from small parts up to parts of approximately 1 m². For years we have specialized in the field of deformation of aluminum and stainless steel sheets (also in sandwich construction). In our pressing plant single, progressive or transfer dies are used up to a weight of 25 t. There are automatic punching machine with a printing speed 1000-16000 kN and a table size of up to 5200 x 2300 mm. There are additional single presses with a pressure capacity up to 6300 kN in use. For the production of sandwich parts (especially shielding plates made of stainless steel) is a 8000-kN large-scale press. On our punching machines are used to coil up to a width of 1200 mm and a plate thickness up to 5 mm, depending on the section that process. We are predestined for assemblies, ie. For the implementation of welded structures with six-axis welding robots and automatic joining of nuts and bolts In order to achieve an optimization of the work, we have assembly, placement and spot welding machines in use. By working closely with our partners, we are able to also surface coatings and galvanizing on grafts from powder coatings to cathodic dip coating offer. Logistics As a supplier with world-resident customers, we measure the Logistics Management utmost importance. As requested, we deliver just in time and place value on adherence to your requirements in terms of delivery quantity and packaging. Here we support a modern, always with the latest requirements customized IT technology. Our logistics department handles your incoming EDI, Internet or fax calls immediately and ensures that production, storage and shipping can implement your requirements promptly and respond to your needs. We work together on request as specified by you or by us carriers commissioned reliable partners and respond quickly and flexibly when difficulties arise. Toolmaking Our tool guarantees us a high degree of flexibility for changes and remakes of assemblies to customer specifications. It is an important partner of our pressing plant because downtime is minimized through him. Through close contact with our production, the tools are optimized in the short term. Preventive servicing and maintenance are an important prerequisite for safe production. 20 toolmaker / maintenance have three layers in use.

The company was founded under the name SchwarzTEC SHS (blacksmith trade Black) in December 2009 and led to June 2011 as a pure online trading for wrought products. In June 2011, the Assembly service S + F that was added to and carried out installation work of all kinds. In January 2013, the company was renamed SchwarzTec and took over the company Elektro Radio honey in Titisee-Neustadt am 01.02.2013 and integrated into the company SchwarzTEC. The main tasks of the company are SchwarzTEC. Electrical installations, control panel, customer service, repairs and installation work of all kinds, and metal works, and trade in electrical and metal goods. Our focus is at the moment in electrical engineering, but are currently under construction of the metal area and looking for jobs in the field of steel construction / engineering, whether welding, bending, drilling, punching, shearing, sawing and assembling, we are equipped and able to produce a wide variety of components . We would be pleased as you can to help the supplier on. Your company SchwarzTEC

The KSL - Kuttler based in Dauchingen, for over 20 years manufacturer of automated handling systems in printed circuit board technology with an international customer base. Since the beginning it is in the house Kuttler on precision and quality. This could only be achieved by one's own design and manufacture of laser, welding, Kant, turned and milled parts. In order to achieve more effective use of in-house machinery, Kuttler now offers to future contract work. Kuttler become one company that offers a full service.

ASM manufactures welded constructions, mainly as a supplier for machine and plant construction. This piece weights up to 16 tons in principle possible. Up to 32 tonnes limited (only two crane operation). Primarily we use this normal structural steels, and stainless steel and aluminum. This sheet metal, section and tube, hollow sections and tubes are processed. We can realize from Schweißrohteil through to finished and painted assembly complete solutions from a single source.

M design production, MdP, has more than 60 years the total supplier of technically advanced metal semi-finished and finished products assembled. With our specialized business units we have many manufacturing technique at home. ! Private jet cabin and "Sublimotion" street M design production "passion for metal" has its own jet cabin and soon sublimotion street. This allows for shorter lead times, reduced scrap and lower costs by eliminating the transport and packaging of the parts to be processed. ! Short delivery times The extensive fleet including jet cabin we can deliver quickly. Our focus on lean manufacturing is helping us. ! Polling custom Kan-ban or JIT? M design production controls that you have your products on time and in the right amount. ! thinking Together we develop the best product at the best price which you already have our minds of sheet metal at your disposal.Own engineering course for years in 3D, and will help us do that. ! Knowledge of technique You benefit from 60 years of experience when doing business with us: we have at that time really learned what matters in sheet metal. ! Outsourcing without worry Also additional outsourcing as screening, powder coating or pickling / passivation, we arrange for you with our reliable suppliers. Besides supplying MdP also produces own-brand products for the food and related industries. MdP is, with its own team of experienced engineers, a strong partner in the development of your product. Obviously we are QRM and ISO9001 certified. Whether for parts production or delivery of design to the finished end product, M production design has always set itself the goal to exceed your expectations.

Punching & bending is the focus of our work. We supply high precision punching and bending metal parts that are required in large numbers. Our value consists of price, quality and service. Today most industries require a permanent cost improvement and we are able to help them delivering the best value at the right price. In our production, we use machines that are associated with a specific manufacturing tool, carrying out several procedures in a single work step on a highly cost-effective way.

BMS GmbH ,,, Blech und Metalltechnik Schreiber Medium-sized family company manufactures complete assemblies, fixtures, welded parts, mechanical production, machine enclosures including assembly, including powder coating. Construction in the house.

The company masters the most demanding welding technologies. We are a family business founded in 2017. Our key business objectives are excellence in the projects we work on and hiring highly skilled people to achieve excellence. Services: production and welding of metal products, Assembling various metal constructions maintenance work on the facilities, electrical installations.