MAP. supplies the following products directly in their assembly:



- Machine beds made of mineral casting (DUROPOL)

- Weldments

- Machine covers

- Special cabinets

- Switchboards

- Mechan. Large parts up to 14 m and 50 to



The development, calculation and construction takes place in house.



MAP. manufactures with the latest laser machines, most modern welding equipment and welding robots complete system solutions from the machine bed of the machine casing up to the cabinet and control panel.

On a total area of 20,000 m² are Großbohrwerke for workpieces up to 14,000 mm in length and weighing up to 60 tons available for editing. Your parts are painted or powder-coated in your desired color.



We develop innovative solutions using the latest 3D CAD / CAM workstations.
You determine the scope of delivery



We cordially invite you to our website for a tour of our operation.



Or get to know us in person during a visit in the Swabian Walked know an der Fils.

Sheet Metal Manufacturing

Industrial Business Products



As a supplier of products for the machinery, equipment, apparatus and vehicles, we are to do justice in a position to even the most complex requirements in the production of sheet metal parts and assemblies.



Modern CNC machines for sheet processing of metal sheets by punch nibbling / shaping, lasers and flexible folding of this material are complemented by tailored joining, welding and assembly technologies.



The secret of our performance in terms of precision, speed of implementation and flexibility on the one hand, the direct coupling of this technology in our 3D CAD system Pro / Engineer and on the other the lived symbiosis of qualified craftsmanship and modern technology.



So we are not only able already to produce predefined products efficiently from small batches, but can offer our customers complex solutions to problems.



Surface Treatment business



With our self-developed powder coating line we are pursuing the goal of making new powder coating technologies are made accessible for the majority of the area. As a modern service company, we offer our customers factory coatings for components and structures up to a size of 12,000 x 3,200 x 2,400 mm (L x H x W).



Specially adapted and tested single and multi-layer technologies for components and structures made of steel, galvanized steel and aluminum provide solutions for both indoor as well as outdoor range up to the marine environment and for heavy corrosion protection.

Enikon Aerospace (“Enikon”) is the largest company in the world that is engaged in the finishing and painting of interior parts for commercial and business aircraft. In addition to applying various types of finishes to aircraft interior components, Enikon provides pre- and final assembly services. Our focus is on composite and plastic components. The types of parts we typically finish include:
Ceiling panels
Side-wall panels
Light cover panels
Luggage compartments, including bins and doors
Grip rails
Body Crew Rest Compartments (BCRC) and Flight Crew Rest Compartments (FCRC)
Stairs
Ventilation panels
Reveals (windows frames)
Video screen frames
Latches
Stowage compartments, partitions, doghouses
Housing for lavatories, including all lavatory parts and pelmets
Galleys
Passenger Service Utility (PSU) panels
Cockpit doors and post
Cockpit components and shrouds
Doors Lining
Seat shells and plastic components

Enterplay sc has been operating on the domestic and foreign market since 2015. We offer a range of services related to the processing of steel and plastics. In recent years, we have cooperated with many companies from industries such as automotive, conveyor belts, renewable energy sources ... Our ability to perform precise metal machining operations allows us to provide high quality products to our customers, both at home and abroad . Thanks to the fact that we constantly invest in modern technologies, we can offer a wide range of services that meet the highest quality standards.
Regardless of whether you need individual prototypes or serial production, we can adapt our services to your individual requirements.
Feel free to contact us and cooperate with us. Together we can achieve even more and meet your most demanding expectations.

Service for device from the middle of Germany

With modern technologies locally and trained staff, we support our customers' ideas.

We are able to design and develop products according to customer specifications further in the engineering design.

Our production range goes from the cutting and non-cutting production to the manufacture of CNC machined parts, stampings, CNC laser parts, CNC bending, welding assemblies as well as complicated and high-quality sheet metal parts and sheet metal structures, machine covers, racks, sheet metal enclosures, cabinets, assembly groups in steel, stainless steel, aluminum, copper bus bars, etc. completely from prototype to mass production including the desired surface coating (eg, powder coating, wet painting, silk screening, etc.), gasketing and assembly.

You get full service with short delivery routes from the center of Germany - that saves time, reduces your costs and protects your nerves.

Short term, we have spare capacity to run our cleaning and degreasing.
The system works both in the spraying process and also in blowing off the parts to be cleaned
with air. To clean aqueous cleaners can be used.
Ideal for high volume regardless of whether geometry transmission parts, engine parts, drive shafts or plastic crates and baskets.


Our quality management system is through the - certified "DQS German Association for Certification of Management Systems" according to the standard DIN EN ISO 9001:2008.

ERGO E.B.F mainly working as subcontractor. Our production facilities of 3500 m2 provide tilt cranes with the lift capacity up to 5 tons. In compliance with modern CNC technology machines, 12 metre long shootblasting chamber for metal cleaning and a line for painting, ERGO E.B.F is capable to produce different kind of metal structure starting from semi finished metal goods and ready details till wide range of metal constructions painted or galvanized
Highly experienced and well educated ERGO E.B.F employees will ensure the quality for your metal products. Furthermore, designing engineers are
able to elaborate your project in CAD, 2D, 3D.

we have proved ourselves as a reliable partner for industry, commerce, public authorities and private clients over the years. Already in the planning phase, we accompany our clients and assist them with our knowledge. Our strengths are flexibility and adaptability to the customers' needs.

Since foundation, we were able to position ourselves as a long-term partner for many customers. With a workforce of over 30 employees, it is possible goal-oriented work through us Projects.

SEAMLESS ALL-ROUND
SOLUTIONS
As a specialist foundry we concentrate on your ideas and requirements, and on implementing them in castings of up to 4 tonnes made from various materials. Simultaneous engineering, prototypes, and small and medium-sized production runs are our strengths, giving you the benefit of unusually short delivery periods, security of processes and reliability.

Our core competencies are in the following fields:
Machinery and plant manufacture
Construction plant spare parts

Since 1966, PERILLAT François & Fils company has been keeping on developing in the field of screw-cutting.

Now, combining experience and high technology, we produce accurate mechanical components according to customer's drawings for diverse application fields :
Automotive industry, Car and Bicycle parts ; Building trade ; Appliances ; Electronics ; Toys ...

Our policy is based on :

* The perfect quality of our products and services
* The respect of the delevery terms and a great reactivity to our customers demand.

The company EURICH & SCHELLER GmbH, based in Bornheim / Rhein-Sieg-Kreis, was founded by Wilhelm Eurich and Alexander Scheller. The focus of the service and product portfolio is the development, design and manufacture of electronics and metal housings. Our own production area enables us to produce prototypes on the basis of a product idea in a very short time. In the field of contract manufacturing, we are happy to support you with our manufacturing capacities.

We are equipped with the most modern CNC machines from Trumph (edging) and DATRON (milling). Riveting, pressing and assembly are also part of our range of services. ESD work tables are available for equipping assemblies.

When it comes to the development of mobile environmental enclosures and EMC protection is also an issue, then you've come to the right place. Perhaps we already have a ready-made housing concept for you in the 19 "or embedded area ?!

Please do not hesitate to contact us!