Small series made of plastic and rubber and silicone are our strength.

We build the moulds ourselves and can produce all three materials on modern injection moulding machines.

The high vertical range of manufacture is rounded off by an efficient CAD team.
The company has modern machinery for mould and tool making and for metalworking and injection moulding.

The following technologies are used:
- Injection moulding of plastics on machines between 25 and 450 t
- Injection moulding rubber and silicone on machines between 25 t and 250 t
- Milling
- turning
- eroding
- grinding
- assembly


In addition, the company also manufactures bipolar plates and gaskets for fuel cells

- Bipolar plates made of PPG 86 - low-temperature H2 fuel cell

- Bipolar plates made of BMA 5 - direct methanol fuel cell

- Bipolar plates made of high temperature H2 fuel cell material

The Wolff GmbH is a small craft business specializing in the manufacture of components.

We see our production field in the manufacture of individual parts, prototypes, sample parts, special systems, small series and series of up to 500 parts. We are happy to offer you an individual delivery model, such as partial deliveries or sample parts with subsequent series production. Whether you want to have manufactured parts made of titanium, tool steel, stainless steel or normal steel grades, such as C35, C45 or cutting steel, aluminum, cast steel, or plastic, we are well equipped tool technology for almost everything.

Do let us put your defective components repaired or make new pattern after!

Even small modules are assembled by us and delivered to you. A timely delivery is of course for us with one of the most important conditions that we would like to meet.

We have a very extensive range of machinery to meet your specific needs.A CAD / CAM completes this place and we are able to drawings of different formats, such as IGES, STEP, DWG or DXF, 2 - or 3 - to edit Dimensional. For us, a processing your own programs is feasible.

Our young and motivated team of currently 12 employees is very flexible and always ready to manufacture your parts, if necessary even within a few hours. Try it our service!

The standard of our quality control is high. Our staff is always attentive and checked each other, then is followed by a final inspection of manufactured parts. So we always deliver certified quality. Your satisfaction is essential.

For more information, the possibility of a quote or a personal conversation you get when you contact us via E-mail wolffgmbhlengerich@t-online.de. You can also call us at 05481-81064 between 7:00 and 17Reach 00 clock.

As would be delighted to help you.

Wolpert Modell- und Formenbau GmbH is a manufacturer of prototype parts and custom-made plastic products using injection molding processes primarily for the automotive industry as well as electrical and household technology, and various other industries.

With 95 tons to 4,000 tons of clamping forces and quantities of 1 to approx. 5,000 pieces per year, we can master appropriate sizes within our group with our injection moulding machines.

We also offer a number of diverse and special applications using various and latest technologies, including one-shot organic technology or injection molding.

Our services include other specialist areas such as 3-component finishing technology, hybrid technology for overmolding steel or glass parts with plastic, or special processes such as projectile injection technology.

We offer you mold and tools for your processes thermoplast-injection molding, rubber injection, rubber press. We can also deliver parts for protypes or small series and equipment for mesurement.
We help you with the design and production process for your parts, if you want this.
We worked with the processes: sandwich, monosandwich, two components, water and gas injenction

We are a CNC manufacturing facility for milling from the Greater Nuremberg-Neumarkt in der Oberpfalz

- Our field of activity is in the mold making, model making and prototype production

- We provide, inter alia, bending tools, press tools and sand casting models ago

- In the field of mechanical engineering, we offer our services in single small or medium series

In order to meet the growing demands of our customers - both today and in the long run, our milling parts on HAAS VM3 machine tools, designed with Verfahrwägen XYZ 1016x660x635.
Away orders, we want to convince you with our quality and reliability, so we look forward to your call!

Originally founded as Micropressofusioni in 1979, Zama Solutions is now a company highly specialized in the die casting of zinc alloy technical components ranging from 0.5 to 1000 grams in weight, using presses with closing forces from 5 to 200 tons.

Over these years, we have gained extensive experience thanks to the production of several million components used across many sectors.

At Zama Solutions, we daily produce castings that are used in the manufacturing of:

- Aesthetic and functional accessories for fixtures
- Mechanical components for the electronics industry
- Lock components, both for the construction and automotive sectors
- Automotive components for active protection systems
- Junction elements for structures made of aluminum profiles
- Components and accessories for zippers
- Components for stationery
- Elements for furniture
- Components for small automatic machines
- Gears and toothed pulleys
- Connectors
- Heat sinks
- Components for the appliance industry
- Valve elements
- Systems for office machines
- Hinges and joints
- Components for leisure and recreation

We currently have 699 molds active that can produce 1241 different types of components, with production runs ranging from a few hundred to several hundred thousand pieces.

The quality that is most recognized by the majority of companies turning to Zama Solutions is our extreme flexibility in constantly customizing the service according to their needs.

Furthermore, the production department is continuously supported by the tooling and engineering department for the design, construction, and maintenance of the molds for zinc alloy die casting. This is of fundamental importance, as any issues encountered during production are resolved in very short times, sometimes directly on the press itself.

The potential of zinc alloy is vast, and you too can benefit from it. That's why we have prepared a document available for free download, where we explain how you can take advantage of using zinc alloy as material for your components. You can download it directly from our blog at www.zamasolutions.it

If you have any questions and want to learn more, I invite you to contact us, so we can examine your case and understand how we can help you. Go to the contact page and fill out the form in detail in all its parts.

Production of drawing parts mainly with machining processes

Located in Viganò (Lecco), 40 Km from Milan (Italy)over an area of 5,600 square meters ,
Zeta Stampi srl has been designing, building moulds and injection-moulding plastic material for third parties for over twenty years.
We also manage post-molding processes such as painting, metallization, chrome plating, pad printing and screen printing.

We have an updated workshop with numerical control machines, CAD / CAM softwars,No 14 injection molding machines from 60 to 900 tons, measuring room and ISO 9001-2015 certification.

Our main fields include automotive, electronics, appliances,household appliances, garden machines, furnishings, advertising technology, household items; layette and the cosmetic industry.

In any case, we have skills and adequate structures to manufacture products for other sectors.

Get in touch with us so we can help you with
your projects, in terms of costs, quality and delivery times

CHANGE FROM AN IRON WORKS SCHWÄBISCHE
THE MODERN INDUSTRIAL OPERATION A company in the course of time. From the iron work of the year 1708 a modern company with over 2900 employees developed world that now offers in the fields of foundry technology, steel profiles, drive systems, slide bearings and machine components to the customer oriented products. Then as now, the name ZOLLERN stands for quality, customer focus and technical expertise. And still we attach great importance to comprehensive advice and customer focus - be it in the most favorable interpretation, for example, your gear, your fine casting, or your plain bearing at the optimum material selection. Thus, we offer our solid STEEL PROFILE according to your needs to: from simple DIN profile to the finished, complicated special profile. The FOUNDRY TECHNOLOGY processed today a wide variety of alloys of copper over steel to aluminum.In this area, various wrought copper products and castings are made: Those are forgings, fine and vacuum investment castings and sand, mask and centrifugal castings. And if you need a cast of your Rapid prototyping model, we pour it for you in the material of your choice. In the ANTRIEBSTECHNIK we specialized according to the needs of our customers to the product groups and plain bearings, gears and winches and linear elements for handling technology. The BEARING TECHNOLOGY, youngest member of this chain coincides with the current product from all areas of application of large-scale engines and general engineering. These include in particular bearing for large diesel engines in ships, locomotives or stationary systems, plain bearings for large compressors, turbines, gears and electrical machinery, wholesale plain bearings for cement mills and ore processing, thrust bearing pads for hydro-electric facilities, housing and plain bearings, Kippsegmentgleitlager as well as various forms of special bearings and multi-layer Verbundgußteilen. Finally, MECHANICAL ELEMENTS: They complement our program with high-precision steel shafts, flat and round guides, they are, as the profiles, handles up to eight feet long and individually. All products can be finished in the home as well as heat and surface treatment. Even fully assembled modules are possible.

service portfolio
Tool and fixture construction
Manufacture of small and large-volume tools made of plastic, aluminum or steel with temperature control and hydraulics. We produce your foam tool, hand laminate tool, RTM tool, SMC tool, hydroform tool, plastic block material model, thermoforming tool, injection molding tool, die casting tool

Milling large format from 500mm x 500mm up to 8.5m x 3.5m
Milling Machining of cast iron, aluminium, steel, stainless steel, plastic block material, GRP / CFRP
Milling Serial production up to 50,000 pieces per year

Reaction casting of polyurethane PUR in the low-pressure process
Different degrees of hardness: compact, hard, hard integral, semi-hard, soft