The Adrian Michel Group AG is a group of companies, centrally located in the Swiss Mittelland. Our core competencies are in the areas of cutting, bending and deep drawing as well as in the assembly of complete assemblies. A specialty is visible parts for special design requirements. Depending on how the stamping we take care of the specific post-processing such as degreasing, grinding, stud welding, drilling, milling, thread cutting, finishing or thermal treatment. Our customers include international companies in the fields of power generation and distribution, household appliances, machinery and vehicle, etc. Thanks to our own tool and own design is the knowledge about the customer solution in our hands.

D & D Production and Sourcing is a Dutch company with offices in the Netherlands (Bergeijk) and China (Shanghai). The firm was started in 2006 by the two directors/founders, Jan van der Donk and Hans van Dam. Since 2010 they have their own production (assembly) company WOFE in China (Shanghai). D & D Safe Sourcing is ISO 9001 certified and classified as Bosch preferred supplier. D & D Safe Sourcing uses two concepts: "Production for China" and "Production for Europe". 1) Production for China This concept is an interesting alternative for exporting products to China. We take the production of metal (including magnets) -, plastic products and electronics off at selected contractors. This includes also conduct the necessary tools for pressure die-casting, forging, stamping and so on. Parallel to the production in China, we will send your "strategic parts" to our office in China (Shanghai). After receiving all the products is the entrance control, assembly, final inspection, packaging and shipping space and from our factory. The final products are then sent on demand to your local plant in China. Cooperation with D & D Safe Sourcing means to you: • No copy risks • Shorter delivery times • Lower transport costs • Lower import duties • No copy risk • Local after sales support • You pay only upon delivery • European quality for a much lower cost We provide Dutch companies also store and after sales support by our Chinese staff. We successfully doing this for years for clients such as Nedap, Vanderlande and Gispen. 2) Production for Europe The production and assembly are the same as above, but we will send the final/intermediate products to Europe. Here, the final assembly and final inspection instead of your product with the required "key components". Cooperation with D & D Safe Sourcing means to you: �� No copy risks • No transport risks • You pay only upon delivery • European quality for a much lower cost Knowing more? Please contact me for an appointment at your office.

The HMT Heldener Metal Technology GmbH & Co. KG would like to introduce the Veritas AG as a reliable partner. Take advantage of the in innovation and quality awareness of our company. We meet all requirements as a certified supplier to various OEM and Tier I. In recent years, HMT has evolved from a mere supplier of punching, stamping and drawing parts on smaller ZSBs for the boards and smaller modules. Stampings we can on our existing presses punch (press sizes 60-800 t, table sizes up to 3600 x 1600 mm). We process raw materials such as cold-drawn and hot-drawn and micro-alloyed steels, aluminum and various stainless steels. Various coatings such as KTL are feasible in the immediate environment at competitive prices. With the opening of our location in Sroda Slaska in Poland in February 2007, we followed the requirements of our customers manufacturing in low-cost countries.

Since 2001 we have been manufacturing springs for sectors such as mechanics, automotive, home appliance, electronics, home automation etc. Materials used: carbon, alloy, stainless steel, bronze, brass, copper, iron, titanium alloys and in general everything that is compatible with deformation processes. The company is structured to offer excellent supply services for both very small and large production batches (from one to millions of pieces) ensuring synergy between the quality of the made in Italy product and the Just in Time service.

Looking for a supplier for a wide selection of high precision metal parts? ... an experienced manufacturer for punching and bending tools or tool parts? We have been more than 20 years of professional and reliable partner for leading industrial companies. Since 1995 we are certified according to ISO 9001:2000 and ISO 14001:2004 since 2007. 70 highly qualified staff guarantee meet the highest quality standards daily. We specialize in the manufacturing of Bihler punching and bending machines. These machines are characterized by high productivity and high degree of automation. On Bihler machines we manufacture complex parts up to a maximum forming force of 1000 kN, including tapping, welding and assembling. A 1600 kN Emperor punching machine complements our production possibilities. The combination of punching and bending by laser welding offers enormous material savings potential because it can replace metal-cutting manufacturing methods, such as turning or milling.The high energy density of the solid state laser allows the same high process speeds as in automated punching and bending. The thermal load of the workpieces is small. The process is constantly monitored. Manufacturing Solutions with integrated laser welding are fast, accurate and economical. When developing your parts we work closely with the world leaders Bihler and Trumpf. From the beginning, mold manufacturing and mass production were part operated side by side. The constant, fruitful feedback of the experience and creativity of the employees of the two areas is critical to the success of our company. Tools for chipless metal machining according to their own or according to customer drawing for parts production in our house or with our customers made. Our tool room is equipped with modern facilities, including seven three-wire and die-sinking machines and modern milling machines. Leading Punching can be manufactured at Wörgartner tool spare parts. Wage tools are tested in-house. This saves time and gives us for our work valuable feedback. For the testing of Bihler tools are us RM35, GRM50, GRM80, GRM80E, MC42, MC82 and a Mach 1/7 available. In conventional stamping machines are possible tool trials under production conditions up to a force of 160 tons on a 1600 kN Imperial press. The maximum tool length is 1250 mm.

Output capacity: about 2,5 million parts a day Aricles: about 25,000 active parts Materials: more than 1,000 different materials Customers: about 3,500 customers worldwide Export share: about 24 % Schlösser developed itself into a real "problem solver". If special enquiries are requested relating to material properties, dimensions or tolerances of the parts being produced, Schlösser is always the manufacturer of gaskets and stamped parts at the most favourable price and in the optimum quality.

is a strongly growing, independent, family-owned company with a tradition of more than 120 years. is known for its innovative solutions based on the forming of wire, tube and strip material. offers extensive research and development services at an early stage and is a development supplier of OEMs and system manufacturers. offers an extensive range of services, from forming, joining and assembly technologies to surface treatment via machine and tool construction. is present at international level and has production sites in eleven countries on three continents.

We have for parts as well as tool and fixture "tool and machine engineering GmbH & Co. KG Cosmici" founded the company and spun off this area from the ProAss GmbH. We also have certified the Cosmici tool and machine engineering GmbH & Co. KG in accordance with DIN EN ISO 9001:2008! 30 years of competence in - purchasing, production and installation in tool and machine! And new - Laser marking! Your complete supplier of tool and plant, drawing parts and cast iron. We bring our experience and knowledge to your projects. 2,000 employees in over 70 partner companies provide us with advice and practical help. We set ourselves high goals, take on any challenge and find optimal solutions. Take us through the latest technology, sophisticated Produtkionsverfahren and modern machinery. Your ADVANTAGES: SIMPLE - A point of contact for comprehensive and flexible care MONEY SAVING - lower costs by scattering or bundling SAFE - Reliable by quality control and modern technology SAVE TIME - With high delivery speed and outsourcing Challenge us!

Our main profile: Powder coating Precision Sheet Metal Punching, cnc Component manufacturing Corrosion protection We offer a complex service: - Planning the production of the components ponents surface treatment. Our company started as a small family business in 1997. The company started its production in a 300 m2 building with only an oven for powder coating. Today we have a 11,000 m2 - Production line with a 2000 m2 hangar. In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side. Due to our high quality standards, we were able to build long-term relationships with both national and international partners. Our company still operates as a family business, which helps us to keep administrative costs and our prices low. To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises. Our goal is to offer perfect services to our customers. Iso 9001 wiki

Stumpp + Schüle GmbH, founded in 1934, is working in the field of development and production of technical springs, bending parts (wire and strip material), stamped parts and assemblies. The company belongs to the Swedish Group of Lesjöfors AB, which provides spring solutions worldwide using its network of more than 30 subsidiaries. Stumpp + Schüle employs more than 200 people in Beuren (Germany) and Nové Zámky (Slovakia) and is one of the leading companies in the German spring industry. With the Automotive sector forming a big part of our current business, high quality standards and reliable customer care characterize our company. Our special strength lies within the development and production of individual technical springs in co-operation with our customers which are at the center of our activities. Within our own tool shops we produce prototype and serial tools for the production of prototype batches, small series and large series reaching up to several million parts per year. We mainly supply our products to customers in the Automotive and Electrical industry, as well as into sectors like Aerospace, mechanical engineering, textile and energy industry. Customer support and Key Account Management are managed by our headquarters in Beuren (Germany).

Turning ideas into innovative machining solutions Precision machining from single parts to serial production At STIWA Machining Center, we take pride in being your development and manufacturing partner across the entire value stream, offering a comprehensive suite of services worldwide. From prototype to large-scale production, we provide a onestop shop for your machining needs. STIWA Machining Center – your global partner for innovative production solutions.

we produce in 3 different workshops in istanbul, turkey. we do metal sheet laser cutting, bending and welding works. we also have electrostatic powder coating. we do anodizing for aluminum. we also provide nickel plating, gold plating and electropolishing services. there are many reference companies and works we do in turkey and europe. we process an average of 800-1000 tons of metal annually.

imtech GmbH & Co. KG – Your Partner for High-Precision Turned & Milled Parts According to Drawing imtech GmbH & Co. KG is a leading specialist in the production of high-precision turned and milled parts according to customer drawings. With state-of-the-art CNC technology and decades of experience, we offer tailor-made solutions for various industries, from mechanical engineering and medical technology to the aerospace sector. Our Core Competencies: ✔ Precision manufacturing based on customer requirements – particularly strong in small and mid-size series production ✔ CNC turning & milling – 3-axis and 5-axis machining for maximum dimensional accuracy ✔ Combined turning/milling parts – efficient production of complex components in a single setup ✔ Processing of various materials – stainless steel, aluminum, titanium, brass, plastics, and more ✔ Surface finishing & heat treatment – ensuring maximum functionality and durability ✔ Assembly of complex components – complete solutions from a single source Why Choose imtech? ✅ Highest precision & quality assurance ✅ On-time delivery & reliable supply chain performance ✅ Custom consulting & tailored solutions ✅ Flexibility from single parts to large-scale production Complex geometries, demanding materials, or tight tolerances – imtech stands for precision, innovation, and reliability. 📞 Contact us now for a personalized consultation and a non-binding quote!

Philosophy of our company Quality We do not just talk quality - we also implement. In our team everyone contributes to the deliberately ambitious goals of our company. We let the excellence and reliability. Flexibility Latest technologies harmonize with the skills of all employees. Our flexible company size, our clients benefit from short decision-making paths. We are committed with full dedication for the needs of our business partners - it makes no difference whether their headquarters in Germany, Europe or overseas is. Continuity In our design and development department, we implement continuous innovative product ideas and develop special solutions for the needs of our clients.

The mechanical production crucible GmbH (formerly Mechanical Production Radeberg GmbH) has almost 20 years a reliable supplier of complex components and assemblies for industry and crafts. We want our abilities and achievements in more detail representation. Our company is distinguished by the fact that we do everything that is not only made of sheet metal, but that we deliver a complete product from one source. This means all forward and work below as CAD design, electroplating, powders, painting, screen printing, etc. are done by us. We offer the complete design of a product and the production according to your wishes. Attached you will find an overview of our manufacturing capabilities.

INEX is a full-scope furniture producer with more than 10 years industry experience. For over a decade, we fulfill the highest standards of leading international retailers, consumer brands and furniture companies, with full in-house control of the whole manufacturing process.

Services of Hametec AG include the contract manufacturing of CNC machined and - turned parts up to 5 axes, welding TIG MIG MAG, punching, folding and bending work and the glass beads. The areas of expertise are diverse, most notably the production of Chromstahl¬ assemblies and welding technology are among the strengths. We are quickly and proactively and offer also the following services: - Delivery in KANBAN - Comes with storage - Delivery of safety parts "Charge Professional" - Plastic parts in "food grade" Continuous improvement as an added value for our customers Our exceptional CIP approach is a key element of our success. We are convinced that we can offer our clients significant added value with our CIP methodology, which helps them to become more competitive. Our customers have benefited this year from product savings of 3-28%. Try us.... Ask for our corporate presentation and see for yourself how we value our customers. Translation by Google Translate

The BKM precision tools, punching and bending parts GmbH was founded in 1977 and stands below with you: 1) Products: - Leaf Spring / keys springs - Connection, threaded and welded parts - Stamping and bending parts - Contact parts and springs, with or without rivet - Wire parts - Spring-loaded terminals and special bending springs - Coal guidance / mounting hardware (mounting small components.) 2) Dimensions: - Material thickness: Band 0.05 to 5 mm - Wire Ø 0.1 to 6 mm - Lengths up to 400 mm 3) Materials: - St-material - Carbon steel - Stainless steel (1.4310/1.4301) - Non-ferrous metal (bronze, brass, copper) - Special alloys 4) finishing: - Harden, even bainitic - Case hardened - Surface treatment (Vibratory grinding / polishing / start) - Galvanic surfaces 5) Industries: - Automotive - Electrical industry - Household appliances - Entertainment Electrical - Toys and Leisure Industry - Medical - Solar 6) departments / facilities: - Construction (development) - Tool (also prototype) - Presses with up to 125 tons. - Punching and bending machines up to 25 tons. (Bihler, Wafios) - Tempering - Trowalanlagen - Sorting by a camera system 7) Certifications: - Certified according to ISO 9001:2008 and QuH (Environment) - TS 16949 in preparation "All in one" is the motto of our house. Already on offer stage, we can provide valuable recommendations to product improvements or cost reductions by simplifying the design, appropriate material selection or tolerance definition you our years of experience. More than 100 competent and committed employees in management, engineering, tooling, manufacturing and quality assurance take care of the optimal realization of your wishes. Corporate objectives BKM has been successful for over 30 years in the field punching, bending and contact parts, leaf springs and wire form parts operate. Our business goals are * Customer Satisfaction * Motivated and satisfied employees * Latest Technology * Expansion of market shares and * Protecting the environment

Welcome to the world of precision parts We are pleased that we can imagine in this way with you a powerful supplier of CNC turned parts, CNC milling parts, bending parts, the complete CNC sheet metal and especially the mechanical assembly. In the area of our assembly often diverse precision parts, such as aluminum machined parts, plastic machining parts, wire parts, laser cutting of stainless steel and metal stampings used to complete some complex mechanical + electro-mechanical assemblies. This in turn requires an extensive technology park ahead of puts us in a position to open up a very broad range of cutting and non-cutting metal and plastic processing, such as the manufacture of precision aluminum milling parts, brass turned parts, turned parts and laser blanks. This will open up with just a central partner considerable parts and technology spectrum in the field of precision parts. Although we sometimes are merely a supplier of CNC machined parts, CNC turning parts or bending parts, our tasks go beyond the mere delivery of structural parts by far. We are often a development partner for stamping parts, the CNC sheet metal and aluminum milled parts and also possess expertise in materials and technology experience. As a result, we are rather a QUALITY and COST OPTIMIZER. Customer satisfaction is our ultimate goal. Therefore, we are a value-added partner that ensures this requirement through comprehensive services, innovative technologies and reliable communication. This in turn leads to positive effects in the areas of cost reduction, security of supply and increase productivity. We are happy to provide you with reference products such as aluminum milled parts, brass turned parts, plastic machining parts and turned parts from our prior production and develop according to your requirements, for example, complex precision turning parts, stamping bending parts, wire parts or CNC turned parts.

At the firm. DFT PRESSWORK A / S is a family-owned Danish company that can look back on over 35 years of experience in the fields of extrusion, stamping, deep drawing and sheet metal processing. It was formed by the merger of the companies DFT - Danish Impact Extrusion Technology A / S and PressWork A / S, and the company is located in the premises of the company Danfoss in Nordborg.. Danfoss cold extrusion and sheet metal work were taken with respect to, among others tasks. It employs around 90 employees and there are 25 fully automatic production lines available. This allows the production of small series as well as large series - up to 15 million units annually. The company DFT PRESSWORK A / S is one of the most important suppliers in Europe, not least due to his expertise and his production techniques. The clients come from different areas, and these include manufacturers of automobiles, truck accessories, hydraulic components, thermostatic valves, machinery, etc. They all have high expectations regarding delivery time, price and quality requirements. Furthermore, they may with low production costs, expect quality products, flexible order processing and reliable delivery.