We manufacture since 1938 metal products for technical uses, punched, laser cut, bent, bent, deep drawn, pressed, drilled, threaded, countersunk hardened. Our range includes filter screens with or without borders, disc springs, washers, saddle washers, high precision shims, complicated shapes (with or without bends or deep trains) with total or consequential cuts, etc.



We have not formed a department for surface treatments, but thanks to good relations with relevant specialist firms also get this.



Punched parts made of all metal or of plastic sheets such as nylon, Teflon, insulation, polyester film, fiber, PVC, laminated paper, pressboard, etc. belong to our product range. Thanks to a large stock of raw materials, with more than 1,300 different varieties or thicknesses we can deliver at very short notice.



The tools required for our manufacturing are produced in our own tool shop.We can advise you when planning or designing a part, in order to develop the most economical solution.
Our specialty: R total - in the quality design, concentric and flat, of any material suitable for punching, even small series. General Tolerances: + / - 0.05mm. Since we make mostly non-standardized rings according to the special requirements of our customers, we do not hold the finished goods warehouse.



Your advantage: It is worthwhile to consider whether twisted washers could be replaced by punched in every respect. In addition to pricing advantages, the choice of material is particularly less concentrated towards higher strength and corrosion resistance.



Our viewable and downloadable here (HTML table) tool list (see website) will show you our facilities. This tools not included can be produced at short notice and with excessive costs due to the internal normalization.



Ask us.

The list (see homepage) contains the existing complete sections that are constantly updated. Moreover, we have for cases where the preparation of a complete section due to small numbers does not justify a large number of simple circular cuts.
These can be for diameters over 50 mm within the substance is technically possible in two passes, ie outer and inner diameter punched separately while maintaining concentricity, combine arbitrary. This with a tolerance of + /-0.1mm. Another reason to ask us!



Further manufacturing opportunities exist for smaller series from 120 - 1200 mm diameter at a max. Material thickness of 3 mm (circular shear).

We are a firm whose main activity is production of metal parts, steel frames for machines,
according to techical drawings from the customer.

The steel,or stainless steel parts and components are mostly welded, combined with CNC milling machines, CNC lathes, with high precision and quality, so we offer our services in those areas.

Our main field of activity is the production of customer-specific stamped and bent parts made of strip and wire.

Special raw material is required for each product. For this purpose, we purchase slit strips and wire made of stainless steel and spring steels, copper, brass, bronze, nickel silver, beryllium and other alloys. We process dimensions from 0.05 to 3 mm thick for strip material and 0.10 to 5 mm diameter for wire.

In further production steps, we assemble stamped parts with other components such as electronic components, insulation foils or pressure foams to form customer-specific assemblies.

The spectrum starts with simple assembly parts that are assembled in auxiliary devices by trained personnel. For complex assemblies, we use pick-and-place machines with welding robots, in which camera systems are integrated for 100% control.

We are a dynamic and innovative company that specializes in the development and manufacture of gaskets and stamped parts.



Our years of knowledge and experience in the broad field of stamping and forming technology, we have incorporated in the establishment and technical equipment of our new punching center so that we are now able to produce a wide range of stamping products from various materials in any quantities .



An now the cutting edge of technology appropriate machinery and a powerful, motivated team will allow us to our customers' requirements for premium products in certified quality flexible to implement market-driven pricing.



We give our customers a competitive advantage by designing with them and develop new products.

DMS Blechbearbeitung GmbH
Services:
2D and 3D laser cutting
Punch
Bending Manual and robot
Milling, turning, drilling, tapping, countersinking
Grind
Welding, TIG, MAG, spot welding, plasma welding
Surface treatment
Paint
Pad Printing
We are aware of our long-standing tradition of working metals. The know-how and the skills of our employees have grown steadily over time, and have been constantly broadened. With each project, we increase our wealth of experience. We use again an advantage for our customers This experience and innovation.
We are a specialist for induviduelle solutions. A partner for superior quality claims. A universal processing specialist.

DOGA is an automotive supplier, specialized in developing and manufacturing a variety of sheet-metal parts using a machine press, stamping press or fine blanking as well as assemblies of spot welding and CO2.

DOGA has a wide range of machinery that allows us to work with a great diversification of products within the automotive and in other sectors like industry and electric home appliances. This diversification has contributed a deep knowledge in the treatment of different materials like aluminum, stainless steel, inox-cooper, high strength steel, etc…

We work in simultaneous engineering with our customers as a supplier for development of complex parts and welded assemblies.

Our toolmakers specialists allows us to offer a trustworthy and agile service in the quotation and construction of dies.

DOKAtec is the expert for the design and manufacture of individual supplier parts as well as complete electronic ones
Assemblies for every branch of industry. Our wide range of services ranges from the development of mechanical devices and system components to the production of prototypes, small series and series, as well as their assembly, including the integration of electronics.

Thanks to a high degree of flexibility, our motivated team also fulfills high demands on time-critical ones
Processes. We see ourselves not only as a supplier, but as your partner who supports you throughout the entire process
Continuously advises and supports the production process - regardless of whether you want to use individual services or the full range of our competencies.

Mission

With the innovative products, interesting for the market, we enable growth and development of the Domel group and assure positions of employment in wider environment.

Values

In Domel d.d. we appreciate:
1. Creativity
2. Care for our customers
3. Responsibility
4. Spirit of enterprise
5. Open communication
6. Care for our employees
7. Cooperation
8. Ambitiousness
9. Loyalty
10. Care for local environment

Management system

Domel is known for a long tradition of providing the highest quality products and processes. This focus is also demonstrated by its quality management systems certificates. Domel received the ISO 9001 quality management system certificate back in 1992.

The company develops environmentally friendly products and technologies, reduces emissions, manages waste prudently and uses natural resources efficiently.

Environmental management system

Domel has an environmental management system that provides for effective control and the reduction of damaging effects on the environment. The company develops environmentally friendly products and technologies, reduces emissions, manages waste prudently and uses natural resources efficiently.

The company conducts itself in accordance with the strictest standards in all of its activities, as evidenced by the ISO 14001 certificate, which Domel successfully renews on a yearly basis.

The company's environmental policy sets out its responsibility to the environment, which applies to all employees and those that work on behalf of Domel.

Due to an unusually large vertical range of manufacture our range of interested parties from different fields, such as mechanical engineering company, Mechanical sheltered workshops, machine shops, Werkeug and device builders, architects, designers aimed etc.

We manufacture small and large series, as well as individual pieces according to drawings or samples. Our unique machine park is equipped with both modern CNC and conventional machine tools.

Drölle your partner for stamping and forming.
We offer individual, high quality and innovative solutions in the field of stamping parts, stamping and forming.
With us, you are correct! Get an overview of our company, the product portfolio and its broad range of applications.

As a medium sized company we are with years of experience specialist for stamping and forming.
The focus of our company is the production of stamping drawing and precision cut parts and the assembly of complete assemblies that are now sold at national and international level for years.
Our customers are leading manufacturers of household appliances, automotive, aerospace and electrical engineering industry. Our own precision tool guarantees the accurate production of customer wishes and the advice from the prototype part up to the standard part.
A motivated team of employees and large flexibility in the organization, speaking for the highest quality and technical advice.

The company was originally founded by the engineer Hermann Rohrs 1919 in Magdeburg. In 1932, his son, Dr. Werner Rohrs the management. Under his leadership, the company has developed into a specialist in the manufacture of springs, especially for high vibration loads and accelerations. Since 1946, the company is based in Sonthofen im Allgäu and has evolved from recognized experts for demanding technical springs for comprehensive Stahlverformung specialists.

Today, the company is working on a production area of over 11,000 square meters and is a specialist in the design, production and testing of particularly high-quality technical springs. The continually evolving product range includes compression springs such as coil springs, disc springs, disc springs screws, multi-wire springs, special springs back to precision springs made of round, flat or shaped wire. We process a wide variety of materials in wire diameters of 0.2-16 mm.With our spring products, we achieve high performance with maximum durability in small installation spaces and under difficult environmental conditions. Each of our products is therefore designed to individual customer request, and produced.

The mainstays of the product range today include not only technical springs and flame tubes and the production of lift and cable car facilities. The Dr. Werner Rohrs KG sees itself not only as a manufacturer always different machine elements and accessories, but especially as a problem solver for their customers. Decades of experience, our intensive research and development work, coupled with our extensive inspection and testing laboratories, allow us to work with our customers to offer customized products to many areas of use. In doing so the Roehrs Dr. Werner KG provides the ever-growing demands on the technical development of their products daily.