HEIDENREICH
& HARBECK AG
A
Business in new ways - a system partner
of mechanical engineering
Since 1927 are in Mölln under the name
Heidenreich & Harbeck demanding castings produced.
After more than 75 years, you can now find a
Location where cast components with high quality requirements
designed, cast, ready for installation or partly assembled as
Assembly are supplied. In small and medium series are gray and
Sphärogussteile in weight classes ranging from 50 up to 8,000 kg
cast.
Our corporate strategy "Quality of
a piece "means holistic optimization of pre-finished
Cast component.The construction and all other
Production steps in Mölln under one roof. We do not direct
to external design offices or subcontractor. So read
overall responsibility for appointments and in conformity with drawings quality
with high own competence.
Approx. 190 employees work with great success every day
it - as a creative partner of mechanical engineering - the competitiveness
to strengthen our customers.
Benefit
Our experience and our ideas through joint
Development!
Should also take advantage of it and try us out
by specific tasks or requests.

Dear Ladies & Gentlemen,

as a family from the metal-working industry, we want to introduce you to our wide range.
The versatility of possible solutions is one of our strengths and allows flexible solutions to complex challenges.
So we have only the necessary know-how through various practices, such as CNC turning, CNC milling, wire EDM, etc. We combine the latest technology with years of experience and guarantee you reliability and quality.

The company Heinz Knöpfle GmbH was founded in 1979 by Mr. Heinz Knöpfle as a company for special machines. The company is located in Schwabmunchen / Schwabegg, about 30km south-west of Augsburg.

We supply our products mainly to a solid customer base with great success, we would like to introduce our company.

Proof of quality:

Through the coordinate measuring machine Crysta Apex S544 Mitutoyo, we can now also supply with measuring protocol the manufactured parts.


CNC Turning:

With our CNC lathes we can to edit 65mm rotary parts of the rod automatically and completely. The machines are equipped with a 12 - equipped trade revolver and with driven tools. A counter-spindle and Y-axis enables short cycle times and make some cases further machining on a milling machine unnecessary.

We manufacture precise and sophisticated turned parts as individual parts, small or large production runs with short delivery times and consistently high quality.


CNC Milling:

Years of experience, modern production techniques and machining centers, highly qualified and motivated employees are the basis of our performance. This allows us to present the desired results our customers quickly and inexpensively. Working in oscillation mode allows us to equalize loading times and increase output.



Saws:

The basis for a safe and good machining is not only a good material quality, but also a good blank. With our cutting precise cuts are realized with short cutting times. We saw our own production as well as in wages for other companies.

We offer to Sägezuschnitte from € 0.03 per cut.
The range of materials ranging from mild steel on non-ferrous metals to stainless steel.
Our state of the stocks enable us short delivery times for their Sägezuschnitte.


Welding:

In order to offer production from one source, we have a welding robot available.Through this, a constant quality is ensured.


Device & toolmaking:

With our well-stocked machinery and many years of experience in tooling, we are able to create bending, punching and stamping tools. Our fixtures and special machines find their use in various industries.

Depending on customer requirements, we offer ready-made parts or just the tool. The further refinement of the products we take over for you.

The parts production in the field punching, bending and stamping can be held up 150to in-house.



Try us, we look forward to your orders!


Sincerely,

Heinz Knöpfle Susanne Knöpfle Andreas Knöpfle Christian Knöpfle
Management Management Management Manage...

We are a medium sized company that deals with the casting and machining of aluminum products.

In our house create approximately 50 employees, from engineers on skilled workers to trainees in the departments Die-casting, grinding, machining, CNC machining, grinding, polishing, powder coating, printing and mounting, as well as ultrasonic machining with measurement, X-ray inspection and documentation .

To our national and international customers include companies from the industry and craft fields of electrical engineering, automobile, gear technology, food and household goods, instruments, leisure and garden furniture, furniture, multimedia and pump technology.

Our goal is to offer you a product from planning and design through to the finished part.

For about two years we have hizugenommen to our Gießkompetenz Gravity die casting, the liquid presses and can produce very dense microstructure cost without sprue and riser with this procedure.(Pans, feet, pots but also more complex structures)

Die cast aluminum

11 in electric furnaces, the aluminum is molten.
Depending on the product and use a wide variety of alloys with appropriate melting and heat treatment applied.

The liquefied aluminum is poured by hand with the help of a ladle into molds (molds) that are placed in advance with butane gas fires to temperature.
After a specified Erkaltungszeit the mold is opened and the casting.
On average, we pour about 90 parts per mold and layer.

Each casting is subject to a visual inspection.
The QS takes interval based front-destructive material testing, to observe the casting quality in the interior of the piece.

CNC machining

In many cases, machining operations are necessary.
We have built our own house CNC department that allows all kinds of 'rotating' and 'milled' edits.

Manual edits

In many cases, manual activities are as deburring, judge or drill and tap drill necessary or not feasible other than by hand.
Too, we have adjusted competent forces involved in these activities. Most of the edits are performed on specially constructed devices.

Sawing, grinding,

After casting sprues and risers are separated with log band saws. After the parts are tempered, meaning they are cured in convection ovens at 570 ° C and annealed at 180 ° C.

In the grinding castings for machining are prepared or prepared the surface for subsequent coating.
Also, the dimensionally accurate grinding after drawing is dominated by our professionals, so that a subsequent machining can possibly be dispensed with.

After fine grinding, polishing takes place. The customer receives the polished finished product.

Powder coating

To give the surfaces of castings a sizable structure or enhanced durability, abrasion resistance, weather resistance, etc. (surface finish), we have built a powder coating.

Here we wear electrostatically charged powder onto the workpiece that is subsequently heated in the oven and after cooling results in a solid coating of the workpiece.
The quality of the coating is ensured and documented checks of layer thickness, adhesion and resistance.

Assembly

In addition to manufacturing the einzeilnen components of a product, we take care of you, of course, partial or complete assembly of the entire product.

We ship the finished products, of course, directly from our company to your customers. ...

The company Helmut Eltner tooling GmbH is a family business.

They emerged from the company Koser & Eltner which was founded in 1966 by Hans Koser and Helmut Eltner in Main Valley / Wachenbuchen.

After the death of a shareholder, the company was taken over by Helmut Eltner 1982.

It soon became apparent that the old premises did not allow for necessary investments more. Therefore, a 3500m ² plot of land was purchased in 1989 in Kahl / Main and built a 800m ² building, which was purchased in 1990.

The machinery has been since that time continuously expanded, and modernized in order to respond flexibly to customer requests.

In 1996, Dipl-Ing. Ralf Eltner ordered the second managing director, the company is run by him alone since 2001.


Manufacturing Technology

Flach-/Profilschleifen
Rail profile grinding
Wire EDM
Die sinking
Hole EDM from Ø0, 6mm
Gauge Jig Grinding
Milling, drilling
HSC milling
Turn
CAD / CAM

We want to introduce ourselves to your company as a highly capable suppliers and partners who can offer the best solutions for your particular tasks and problems in trusting cooperation.

Our company acts as a supplier for cubic components, turned parts and assemblies since 1999. Compliance with the required quality and the desired delivery of the highest priority. After moving in the summer of 2007, since then we are 900 square meters of production space. Currently we manufacture 14 CNC turning and CNC milling machines in three shifts. For future changes, there is still significant Erweiterungspotenial at a plot size of about 5000 square meters.

To utilize our manufacturing capacity as possible, we are in search of work, starting with conventional lathes and milling operations from the machine-cutting through to the production of complete assemblies ready for installation and complete solutions.

From the single-part production on small to large series are us in connection with our system partners, virtually the entire range of manufacturing options available, especially in the diameter range up to 150 mm.

We look forward to your inquiries and assure you receive today a timely and reliable processing to.

We see ourselves as a reliable partner for high-quality complete mold manufacturing solutions. As HemaTec, we are proud to be able to provide individual support to our customers throughout the entire product life cycle. Our portfolio ranges from article or module design, through tool design and mechanical production, to initial sampling and the initial sample test report. We would be happy to take on series production and all associated tasks for you. Our specialty is comprehensive project management, from development to assembly of a finished assembly and its testing - every detail is carefully checked to ensure that our customer receives the best possible result. Our production facility is equipped with cutting-edge equipment and technologies to ensure the highest efficiency and quality.

140 people. Chipping areas: turning and milling on modern lathes and milling machines. We believe in complete machining:
chipping grinding, and assemble. We process all machinable materials. Specialist for stainless steels, 1.4301,1.4571, 1.4404 or titanium.
See website: www.heppler.de

Established in 1988, the production HEPRO ag expert in precision mechanics and system engineering. With us you get, because expert support in production planning and process development, tailored and comprehensive solutions from a single source.

HEPRO production ag has a modern machine park and strives permanently improving the material resources.

The company employs about 30 people, of whom there are about 8 per Polymechaniker learners complete their basic training in HEPRO production ag. We promote continuous learning and maintain a social and family and transparent corporate culture.

The quality of our products is up to ISO 9001: 2008 standards.

The Herbert Hänchen GmbH & Co. KG is a modern medium-sized company with years of experience in design and production of special purpose machines. We provide not catalog products, but exactly what you need.

Our production structure is designed so that we can realize for you unique pieces and small series. We are happy to take over the development and design for your individual machine element or customize according to your drawing.

Production of precision parts:
- Bars, shafts, tubes
- Guiding elements and sealing systems
- Fasteners

More product portfolio:
- H-CFRP components made of carbon
- Hydraulic cylinders
- Clamping units
- Pressure intensifier
- Complete hydraulic drive systems

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market.

With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials.

With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.