Tectri, a Swiss manufacturer, is offering expertise in precision machining for high tech industries up to 65 mm diameter (and 250x250x250 mm in block form). We are specialized in medical parts, micro-motors components, aeronautics, optics and other field of applications where tight tolerances and/or complex geometry are asked for. Our expertise is mainly in manufacturing titanium, aluminium, stainless steel, synthetics and other exotic materials.
We have already a long expertise in producing medical screws, bolts, plates, spindles, bodies, piezos, instruments, electrodes and others. We know your specific requests in regard to quality, traceability, surface roughness and surface finish, quality reporting. We are well equiped with state of the art swiss and japanese machine up to 11 axis. Deep drilling, whirling, high cutting speed machining, etc are common machining operations.
Swiss quality tailored to your wishes.

Tectum GmbH was founded in Asbach-Bäumenheim (Bavaria, Germany) in 2009, and after the premature completion of the new factory building including the master offices in November 2009, tectum GmbH started production in the field of painting for the aviation industry.
At tectum, mainly GFK / CFK components are painted as an "extended workbench" for the aviation industry. Our quality management especially for aviation is certified annually by TÜV Süd according to the current DIN EN 9100 standard.
In order to serve not only aviation customers, another production hall for the powder coating sector was set up in 2011. Since the start of production, we have regularly been coating one of the world's largest manufacturers and suppliers of tractors and agricultural machines.
In order to be able to optimally serve all customers - from large to private customers - Hall 2016 was expanded on the north side by a larger color bearing with adjacent compressor room.
In 2013 the tectum company managed to build a nearly 700 m² large hall extension for the area of wet lacquering.
Here in the 11.10 mtr. Long and 5.10 mtr. Wide painting and drying booths with a hoistway system and a combi-dryer mainly metal components for the aviation sector.
In July 2015, due to the high capacity utilization of the above-mentioned cabin, a smaller painting booth - with 6.10 mtr. Long and 5.10 mtr. Width - built and commissioned already in the middle of August.
A year later, an equally large painting booth with dryer was installed in this hall. Here, small parts are painted in the metal sector for aviation.
2017 is the construction of a new highly modern paint shop in an already existing hall planned.
Further information will follow.

Tectum offers not only pure surface techniques.

In order to offer our customers an "all-round package", we also take over transport, storage, assembly and commissioning activities in many areas upon request.

We are an industrial company working in cold metal stamping, bending pressing, component welding, joint assembly, shaping and bending pipes and construction of tools.Currently we have available 8.000 m2 of surface area, of wich 5.000 m2 are built.

The Teknika metal emerged from a single private company and was founded in 1981. She has prevailed through flexibility and quality in the market.
Main production are turning and milling parts on modern CNC machines and conventional turning machines of all materials and in all quantities from drawings or samples.
In addition to the constant increase of the single-part production of pre-finished parts, the company has placed in recent years, particularly focusing on the production of complete assemblies, including stamping and welding parts.
In addition to surface treatments such as hardening and tempering all surface refinements such as phosphating, zinc plating, nickel plating, chrome plating and bronzing are possible.
You can visit our web page at http://teknikametall.com and see examples.
Scope
• Milling and turning parts
• CAD CAM technology
• Mould Spritzgussbau
• assembly
• ISO 9001:2000
. Welding supplies
. Stainless steel products
Numerous well-known industrial companies belong to our long-standing customers in various industries such as
Machinery and equipment manufacturing machine tools auto industry Pumpenbau Mühlenbau turbine manufacturer
Gun manufacturers Militarteile ventilation technology, the Air and Heating
With our 30 years of experience we want prodi also decorate for you.
Yours truly

Serkan Tekeli
Sales manager.

TEKSAN; The address of aluminium machining in TURKEY

TEKSAN was founded in 1980 and is working for more than 34 years in the aluminum machining industry. With his vast market experience, large machine range, priorities in quality and reliability in production, TEKSAN is one of the leading aluminium machining companies in TURKEY.
The integrated and modern plant in Istanbul that is only 15 minutes from the airport and 30 minutes to the seaport, is covering an area of 4.000sqm and is equipped with the latest technologies.
TEKSAN follows a customer-oriented strategy and provides know-how to his customers during the production stages from designing, producing, packaging, delivery and post-delivery periods through the specialist staff.

TEKSAN is engaged in executing all kinds of operations:

Extrusion
Cutting
Routing
Drilling
Punching
Welding
Anodizing
Powder-Coating
Quality control
Packing
Delivery.

The products of TEKSAN have the highest quality.
TEKSAN exports 90% of its production to 15 different countries worldwide (Germany, UK, Denmark, Sweden, Finland, Italy, France)

EXTRUSION LINES
TEKSAN is equipped with a 1100 ton extrusion press and has also a lot of partners in the aluminium extrusion market in Turkey.

QUALITY CONTROL
All stages of production are monitored by the quality control staff and the geometrical dimensions of the fabricated profiles are kept under control.

MACHINING; OUR MAIN STRENGTH

TEKSAN provides its customers diversified fabrication solutions. Using the latest technology CNC machines and through the know how that we collected in the last 35 years, TEKSAN obtained the ability to supply his customers many solutions. We always invest in modern machinery to provide good machining with the highest precision.

OUR MACHINERY

Double Head Mitre Saws
Automatic Saws
Manual Saws
Eccentric Presses
Welding Machines
TIG Welding Machines
Vibration Machine
CNC Lathe
CNC Drilling Tapping Center
CNC Aluminium Profile Machining Centers
CNC Bending Machine
Other Lathes, Milling Machines, Power Drills

SURFACE TREATMENT

ANODIZING
Anodizing unit was designed in accordance with all necessary engineering requirements and latest technology. The 3 m. anodizing facility is specialized in anodizing of aluminium machined parts. The facility is equipped with a wide spectrum of glossy and mat colors.

POWDER-COATING
The powder-coating section is equipped with full automation technologies. At coating section electrostatic powder-coating operation is done with all RAL colors which are demanded by the customer with 60-80 µm thickness.

PACKAGING & DELIVERY
TEKSAN has specialist staff and equipment complying with EU standards in order to satisfy customer demands regarding packaging.

zamak pressure die casting and aluminum
chain paint
treatment and nickel plating gilding surfaces

The company Terom - Antonín Mrkvička, Chlumec nad Cidlinou is a private company which is founded in 1991, and dealt mainly with the manufacture of metal structures and products of mechanical engineering character. Originally the company was oriented to the production of agricultural technology for livestock production.

The existing quality management system has been certified by BVQI according to the standard ČSN EN ISO 9001/2002, we have been certified since 1998.

Contract manufacturing of parts:

Parts for the automotive industry
Parts for the production of medical technology
Hardware manufacturing of parts according to customer's requirements

Our own production program:

Agricultural technology for animal production
Production of equipment for stabling and horse breeding
Mechanical skeleton
Modular wardrobe boxes

Free capacity for further production program:

Manufacture of metal structures and parts thereof of Mechanical Engineering
Manufacture of metal structures and parts thereof for Building
Pressing, welding.Stamping, drilling, grinding, bending, shearing, cutting of the products according to customer's requirements or design documentation
Production of precision cut parts
Rays of the weldments and steel structures in a jet cabin of seven meters