From idea to prototype to series





is the philosophy of our company. We support our customers from product development to series production, relying the product idea through a complete mechanical process chain business sense to. Our services range from design, material and production technical to economic aspects.



The Kotte GmbH was founded in 1933. Our philosophy says it all: Many well-known companies have thus successfully entrusted us with their most complex projects.



It is not really necessary to note, but for all orders, we assure you best quality and reliable appointments.

Are all types of wet painting and sandblasting offered, just contact us

Company LAMPIC is located in the middle of Slovenia, Ljubljana. More than 45 years of plating experience with new anodising line in 2012.

Dear ,

Let me speak with this brief presentation of the company Leistritz Turbinenkomponenten Belišće doo, a Croatian subsidiary of the German company Leistritz AG

With regard to the similarity of our activities in the metal industry, the processing of metal parts for the aerospace, automotive and mechanical engineering industries, we offer you the possibility of business cooperation.

In our factory in Belišće we carry out the following operations and manual processing:
- Deburring, grinding with belt grinders
- grinding and polishing
- High-energy vibratory grinding (barrel with 2 Walther Trowal machines)
- Visual inspection
- Dimensional check - 3D CNC measurement (Global, Brown & Sharp - 4 devices)
- 3-axis NC milling (1 piece MAHO 600)

We have significant experience in the processing of blades and metal parts for all major manufacturers of jet engines and steam turbines such as Rolls & Royce, MTU, ITP, General Electric, SIEMENS, Pratt & Whitney.

As a reliable, high quality and certified supplier, I would like to offer you our services and make them available to you.

For a more detailed introduction and presentation, we will be personally available to visit you at the company's headquarters.

Waiting for your reply!

Best regards,

Atila Kerekeš, ing. / Zoran Pepić
Quality manager / production manager - procurator

Leistritz turbine component Belišće doo
Trg A. Starčevića 1
31551 Belišće, Croatia
Tel .: +385 31 662 656
Fax: +385 31 662 683

Our main profile:

Powder coating

Precision Sheet Metal

Punching, cnc

Component manufacturing

Corrosion protection

We offer a complex service: - Planning the production of the components ponents surface treatment.
Our company started as a small family business in 1997.

The company started its production in a 300 m2 building with only an oven for powder coating.

Today we have a 11,000 m2 - Production line with a 2000 m2 hangar.


In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side.



Due to our high quality standards, we were able to build long-term relationships with both national and international partners.


Our company still operates as a family business, which helps us to keep administrative costs and our prices low.



To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises.



Our goal is to offer perfect services to our customers. Iso 9001 wiki

Services for the thermal processing of technical components. From prototype to production part.

Listemann AG is an internationally operating company with headquarters in the Principality of Liechtenstein. Since 1990 we offer our customers successful material know-how, from consultation to production.

Our technology base are thermal processes in vacuum and inert gas, which are carried out for the production or processing of components in three production facilities in Liechtenstein, Switzerland and Poland. One of the largest vacuum furnaces Europe allows treatment of large components (within D1, 5xH1, 8m).

The services offered by the Listemann AG includes the following key activities: • soldering and heat treatment in vacuum and inert gas • gas nitriding and nitrocarburization • Thermal spraying (APS) • Electron beam welding (EBW) • Sintering of MIM parts • Material and Process Engineering.

Through cooperation partners, we also offer laser generation.

All areas of production are certified to ISO9001. The location of Eschen / FL has an additional certification in accordance with ISO 13485 and the location Winterthur / CH according to EN 9100 and NADCAP.

Do you want a finished component relate then we also coordinate the procurement of materials and machining.

Steel is our lifeblood - that's us

LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019.

LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise.

The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success.

LSV location Landsberg am Lech headquarters

At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level.

LSV location Oberndorf am Lech

The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year.
A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain.

The youngest LSV location in Meitingen

Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

Gustav Wiegard MACHINERY FACTORY GmbH & Co. KG manufactures complete components, assemblies and spare parts for our partners in the steel producing and steel-processing industry and for the fields of mining engineering, the aluminum, copper and cement industries, wood and paper industry, chemical industry and certain other industrial sectors . Over 100 years of experience (founded 1902) and modern customer management led to intensive, global business, which are permanently maintained by a wide range of distribution system.



To this claim we can continue to meet, we rely on our success factors:



A powerful and highly qualified team of 120 employees. We know that our team is the key to customer satisfaction, innovation and business optimization.
Focus on research and development: Therefore, we can now refer to valuable in-house developments.
Incessant investment in the latest production technologies.

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.

Your partner for sheet metal processing - competent, innovative and flexible!

As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard.
Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance.
Quality assurance goes without saying.
The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production.

Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products.

We are looking for personal contact with our customers, scrutinize all wishes and concerns.
Expert contacts and friendliness in all areas are part of our corporate philosophy.