Founded in 2021 as a 100% subsidiary of internationally active Planlicht GmbH and part of the “PlanlichtGroup” group of companies, we draw on over 35 years of expertise in housing and electronics manufacturing for the architectural and technical lighting sector. The highest standards in the area of sheet metal manufacturing for visible housing components determine our daily work. In order to alleviate the constantly increasing complexity across the entire supply chain, we offer, combined under one roof, a wide variety of technologies for the entire range of thin sheets, from powder coating to the assembly of complex mechanical and electrical components. Planfactory sees itself as a local solution provider for demanding partners

As an innovative company and a partner in industry, we manufacture since 1990 complex CNC turned and milled parts in highest precision out of all machinable materials in small, medium and large series ago. We provide our customers with our years of experience and an extensive expertise in the manufacture of complex supply parts and assemblies. Our precision work is appreciated by many industries such as Automotive and vehicle construction, furniture industry or the machinery and plant, at home and abroad. Our machinery consists mainly of modern CNC precision lathes, CNC milling as well as the form and bar lathes. These mechanical equipment ermöglischt us not only an appropriate standard of quality, but also a high degree of flexibility in meeting individual customer requirements.

DS-Technic designs, builds, programs and commissions workstations and production lines. We also offer modification, modernization and service of existing machines and implementation of new types of products on existing lines. We have our own tool shop equipped with the latest equipment and a laboratory equipped with a precise 3D measuring machine. Thanks to them, we produce parts for the devices we design as well as elements for customers, both on the basis of the documentation provided and use of reverse engineering. We encourage you to establish cooperation in the field of not only designing and manufacturing entire production lines, but also making elements that require milling, die-sinking EDM and welding. We undertake to make details both in single and prototype production, for e.g. inaccessible spare parts for machines, or serial production regardless of the degree of complexity. We also offer CMM measurements of finished parts. We offer special solutions, tailored strictly to the requirements of customers, developed through deep technological analysis, and then creating a solution concept which evolves in close cooperation with the client. This approach ensures achievement of contractual goals. We have extensive experience in cooperation with renowned companies, mainly from the automotive industry, but not only. We offer the following services: • CNC milling, • Turning • Grinding • Die-sinking EDM, • Welding • CMM and optical measurements. Machinery: DMG CNC milling centers: DMU 1150V: 3-axis with working area 1150x700x550 [mm] DMU70 eVolution: 5-axis with travel 750x600x520 [mm]. Die-sink EDM SODICK AG60L with the possibility of machining a workpiece with dimensions of 950x740x450 [mm] Conventional lathes with machinability (dia.x length) 450 x 1500 [mm] Surface grinder with dimension max. 200x600 [mm] Roller grinder (dia.x length) 250 x1100 [mm] Hole grinder (dia.x length) 200 x200 [mm] MIG/MAG/TIG welding We provide high quality of workmanship thanks to our own measurement laboratory, equipped with: • Mitutoyo Crysta Apex V9106 – 3D coordinate measuring machine – measuring range 900 x 1000 x 600 mm • Mitutoyo QUICK-SCOPE QS-L 3017Z – vision measuring system • Mitutoyo HR-320MS – stationary hardness tester • Mitutoyo SJ-411 Portable Roughness Tester, equipped with touch screen and integrated printer • Mitutoyo LH-600E digital altimeter • Mitutoyo granite slab class 00 dimensions:2000x1000x220 [mm] • Mitutoyo sets: diameters, micrometers, reference plates, depth gauges, sensors, digital calipers We encourage you to send inquiries to the produkcja@ds-technic.com address. We guarantee quality and punctuality. Website: www.ds-technic.com We will be grateful for the opportunity to present our services more widely at your headquarters. If you have any questions, don't hesitate to contact us directly.

JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future

We are a small company in the heart of the Rhön our specialty is the production of waves of all kinds of diameter 12-360mm and a length up to 1590mm, turned parts up to diameter 450mm, external cylindrical grinding from 10 to 350mm and a length up to 1600mm at a max. Workpiece weight of 500kg. Single and series production Materials: We process steel, stainless steel and cast iron and aluminum Delivery program: Shafts, pistons, bushings, rings, discs, shafts, pulleys, housings, hubs, coupling flanges, spindles, drive shafts, shaft, pistons, jack, wheel, axle, pulley, hub, spindle, drive shaft, turned parts, external grinding, milling parts, lathe parts, automatic turned parts, galettes, shaft supplier, supplier shaft, shaft supplier, hollow shafts, solid shafts

Teamwork between you and us is the cornerstone of successful cooperation Are you looking for a system supplier? Talk to us when it comes to manufacturing and assembling mechanical components. Prototype construction, gauges, equipment and devices, we are also used to this precise work and can shine with the highest quality and short delivery times. If you need individual parts or small series again in the near future and are looking for a reliable system supplier for manufacturing parts, you should think of EL4TECH Fertigungstechnik GmbH. We manufacture materials such as aluminum, steel, stainless steel and plastic. For more details, please see our simplified homepage: www.el4tech.de We would be happy to discuss processing sizes for your specific request with you personally.

Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!

MERZ tronic was founded in 1998 by Volker Merz in Villingen-Schwenningen and is a medium-sized, owner-managed family company with 20 employees. We supply our worldwide customers with electronic, mechatronic and mechanical assemblies according to customer specifications. We are your specialist when it comes to full-service and with our Customers realized several hundred projects, which, among other things, were too considerable Cost savings and shortened delivery times have resulted. MERZ tronic is certified according to DIN ISO 9001-2015. With our motivated employees, our modern machine park and our reliable suppliers, we are your partner today for the challenges of tomorrow.

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

As a regional company, we, HEK Präzisionstechnik GmbH, offer small, medium and large series components in the following technical areas: • Milling: components up to 990 mm long, 700 mm wide and up to 350 mm high • Turning: Machining components up to Ø450 mm and 500 mm in length • Small module assembly • Any surface treatment, such as components with polishing • Measurement reports included (Keyence IM 8030T) What makes us a potential supplier is our delivery reliability, the quality of our products, many years of experience and, above all, the requirement for ourselves to achieve the highest possible level of customer satisfaction. On request, we have the option of storing long-range products in our company to ensure timely deliveries. Flexibility is very important to us. We would be delighted to work with you and to count you as one of our satisfied customers in the future. Have we sparked your interest? Then feel free to get in touch with us.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. . Batch size 10-100000 pcs Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package. Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig. The bodyshop directly in the annex building permits without long transport routes to paint the machine components. Our strength is flexibility and performance! At this point you will get an overview of the company MUZ mechanical engineering and machining: Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time. We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics. Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly. Come to us if you are around a professional partner ... Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining. Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service. We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths. Achieving total customer satisfaction, but we work with our more than 80 employees every day. In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

C.M.B. SRL is a company specialised in the industrial assembly of mechanical, electromechanical and electrotechnical components, the pre-assembly of units and the assembly of automatic and semi-automatic machines. Our job is to support companies to produce: we propose ourselves as your production partner and we can follow the entire production process, from design to the finished product. In over 40 years of activity, we have structured and organised ourselves to develop and implement this activity for every industrial sector. Our experience and energy have always been oriented in this direction because we want to produce technology, technical excellence and innovative products. We are specialised in the production and machining of carpentry, industrial assembly of mechanical, electromechanical and electrotechnical components, pre-assembly of units and assembly of automatic and semi-automatic machines. We also have in-house machining and repair departments, a robot island, a collaborative welding robot and an industrial painting area. We are complementary and synergetic for all electronics, automation and software houses.

We are a company for special machine construction and design, plan and produce systems according to customer requirements. One of the fields of application is the building materials industry. Due to this corporate orientation, we can offer a wide range of manufacturing technologies. This makes us a flexible and trustworthy partner for contract work. We see this type of order processing as our "second mainstay".

For Tresoldi & Casiraghi, producing quality is more than a mission; it has always been a true passion. Since 1962, the year the company was founded, this passion has been reflected in the production of carpentry, which over time has won recognition on the Italian and international markets. A way of working that marked the transition from the craft dimension to the industrial and technological dimension in order to ensure competitiveness and offer only the best at always competitive prices. Progress has been made not only in terms of the number but also in terms of the security of internal processes and respect for the external environment. A success that is thanks to the daily commitment of a group of people who are able to look at the challenges of the future with the same enthusiasm as on the first day. The company employs personnel who specialize in welding, bending, stamping and assembly. The welding work is carried out by qualified personnel who have the following qualifications: WIG — MIG — MAG — ELECTRODE. We are also able to issue mechanical test certificates and non-destructive test certificates.

YOUR IDEA BECOMES A PRODUCT! Customers from various industries benefit from our many years of experience as a manufacturer of complex mechanical parts, components, systems and systems. Qualified technicians and engineers develop complete machines according to customer requirements, paying attention to feasibility and efficiency. With our modern machinery and experienced specialists, we produce individual parts, small series and complete solutions.

Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!