As your competent partner on "bending - welding - punch" we will introduce you to our company and our activities.

As a small medium owner-managed company, we can respond flexibly and individually to your needs. The many years of single-run company was acquired on 01.04.2011 by the metal Neubauer GmbH & Co. KG. Through this acquisition, we can rely on the experience of our 40 employees. Due to continuous modernization of our machinery, we produce future-oriented and price conscious.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The company Brünink-Neuenhauser Metallbau was founded in 1953 by the master blacksmith Albertus Brünink. Today the company is run by the second generation of the son of the founder, Bernd-Heinz Brünink.
The company Brünink is a family tradition and its own production.

Family-owned company with own toolfabrication and own production.

We are producing metal parts from black and stainless steel using next technologies:
Plate laser cutting (up to 3000 x 1500 x 20 mm)
Bending, rolling, stamping, drilling
MIG, TIG welding, polishing
Powder coating
Assembling and packing

We propose for our clients:
Small and middle batches production
European quality
Fast delivery

All technical staff can communicate in English

The NIEROS GmbH specializes in the production of stainless steel products and has been in this area for a very long tradition.

We manufacture technically advanced products for the food, pharmaceutical, and chemical industries.

A main attention is paid to the development of our products and our know-how.

We offer you together with our partners a complete solution including advice and service.

NIEROS is a globally-oriented company, which exports more than 90% of its products. Our products are sold in every country in our well known partner.

Our basic product line stands for high quality and covers the needs of all discerning customers. We were exhibited in 1998, the ISO 9001:2000 certificate.

The NIKRO group of companies consists of 3 companies.
• NIKRO GmbH in Marxen, founded in 1989 with approx. 30,000 m² of warehouse and hall space.
• NIKRO GmbH in Radeburg, founded in 2008 with approx. 28,000 m² of hall and production space
• NIKRO Surface Technology GmbH, Radeburg
The company NIKRO GmbH in Radeburg is a versatile and high-performance contract manufacturer for steel or metal processing. Our specialist staff manufactures sheet metal parts, welded constructions and bent parts according to your specifications, but also railings, steel stairs, stands, half-timbered structures and extensive steel components in our factory in Radeburg.
Individual and special constructions as well as individual and mass production are possible. We manufacture individual parts that are required for welding assemblies in-house. This option saves additional transport routes and is quick and economical.
We have extensive experience in the field of cutting, edge welding and painting of components made of steel or stainless steel. With our modern laser and flame cutting systems, drilling and sawing machines and CNC systems, we manufacture your components quickly and precisely.

Lasers



A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself

We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages:
We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately.

Bending



Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses.



We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure.



In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts.


Welding



Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free.



As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum.



We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting.


Edit



Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems.



The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts.


Surface


As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it.


Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available.


Labels can be designed as a laser marking, engraving or the screen printing method.

I have been working in the metal sector for around 15 years, where I have mine
Completed an apprenticeship and in 2015 the foreman for mechanical engineering &
Operational engineering completed.
Starting in 2020 with metal decoration, fire pillars, etc. has
A lively locksmith business has developed over the last three years.
The professionally equipped one is located at the parents' farm
workshop, where we are constantly developing and gladly yours
Accept orders.
“Challenge is motivation! ”

Officine Parolin is located on the North East of Italy.
We employ 18 people and are specialised in the wire, tube, and stamped sheet processing.
Our core business has been the welding since 1985.
We mainly work on projects and drawings supplied by the customer.
Our flexibility enables us to offer many sorts of customised products:
from furniture, sport equipment, up to lightweight construction.
We work the following metals: Steel, Stainless Steel, Aluminium.
The cooperation with local partners grants us to supply the following services:
painting, galvanising, sating, anodising and other surface treatments, laser cutting on sheets and tubes.
The company is certified according to ISO 9001:2008 standards.
Small quantities to process is not a problem for us!

THE HISTORY OF OGB SRL ...
OUR RELATIONSHIP WITH THE PAST
HISTORY

The OGB was founded in 1984 by the passion and dedication of its founder Giuseppe Baleani starting right away to take care of the engineering services sector through high-precision processing such as tube bending, robotic welding, laser cutting, sheet metal bending, and industrialization prototypes acquiring a good reputation in the domestic market.




Translation by Google Translate

From 1954 Oleodinamica MAS is the integrated solution for all needs related to the world of hydraulics: from design of complex systems to the sale of products, from repair and rectification of components and the supply of spare parts.
Low, medium and high pressure flexible and rigid hoses for hydraulics/pneumatics and related fittings.