Our company was founded in 1994, but we can look back on a 40-year-long tradition as a machining company .. With 90 employees and about 7 million EUR turnover, we are one of the larger Zerspanungsunternehmen in Slovenia / Maribor. Exports to EU countries is ca.98%.

We mainly koenenn offer the following services:

1 Precision Turned Parts
• short turned parts from 1 mm to 90 mm (from bar) to 250 mm (feed)
We are equipped with the following machines:
- 13 - axis CNC turning-milling center TRAUB TNX80/65 with counter spindle, 3 turrets, 3 x Y axis, C 2 x - axis, up to 58 fixed and driven tools, bar capacity 80 mm, Bj.2006
- 8 - axis CNC turning-milling center NAKAMURA SUPER NTJ with counter spindle,
2 turrets, 1 x Y axis, 1 x B axis, 2 x C - axes, bar capacity 65 mm Bj.2006
- 6 - axis CNC turning center INDEX G 300 with counter spindle, 2 x C - axis and 20 driven tools, bar capacity 90 mm, lining 315 mm, Year1996
- 6 - axis CNC turning center INDEX G 300 with counter spindle, 2 x C - axis and 20 driven tools, chuck 315 mm, Bj.1998
- 6 - axis CNC turning center INDEX G 200 with counter spindle, 2 x C - axis and 28 driven tools bar capacity 42 mm, Bj.1995
- 6 - axis CNC turning center INDEX G 200 with counter spindle, 2 x C - axis and 28 driven tools bar capacity 60 mm, Bj.1996
- 4 - axle CNC turning machine INDEX GS 42 with Angetribenen tools, C-axis, and backworking Bj.1990
- 4 - axis CNC lathe TRAUB TNA 300 with Angetribenen tools, C-axis, and Y - axis tailstock
- 2 - axis CNC lathe BOLEY BKN 100

- 2 pcs Ultraprazisiondrehmaschine SPINNER PD / C-SMC with counter spindle, C - axis and driven tools, bar capacity 32 mm - SUITABLE FOR Microfinishing AND HARD TURNING PARTS ULTRAPRAEZISE

• Long turned parts from 1 mm to 20 mm - max 250 mm length
- 7 axis CNC lathe TRAUB TNL 16 G (2x C + Y axis) year1997
- CNC lathe Manuhrin - Traminer 20

2 Milling, drilling
• 5 - axis machining center Deckel Maho DMU 50 V with 24 tools, 5 axis simultaneous machining Bj.1998
• 4 - axis machining center Deckel Maho DMC 60H with Palletenwechsler, 40 bar coolant supply, Renishaw probe, 90 tools Bj.1999
• 3 - axis machining center Deckel Maho DMC 635V - Year 2008
• Several konvetionele milling machines

3 Laser marking and engraving
• Laser marking system ACSYS SHARK MULTI FL20 with Praezisionspaket, suitable for laser marking and engraving

4 Honing
• PRECISION Honing PEMAMO MDR 120 E

5 Surface treatment (including foreign production)
• Grinding (flat, centerless, cylindrical, inner), polishing, tumbling, sandblasting ....
• Zinc plating, nickel plating, bronzing, silver plating, anodizing, enamel Irish, gilding, KTL coating, DACROMET ....

6 Heat treatment
• tempering, nitration, hardening, Nitrocarburiren, induction hardening, MT control ..... (Except House - BODYCOTE - Kapfenberg, PS CIMOS TAM Maribor)

7 Welding
• MIG-MAG, TIG
• Robotic welding cell MIG-MAG with changing table - MOTOMAN

8 Materials
We work with materials of all kinds:
• Steel: Automatic, Compensation (42CrMo4, Ck 45, ETG 100 ...), case-hardened steel (16MnCr5, Ck 15 ..), tool steel (90MnCrV8, HSS ...), Silver Steel, Stainless Steel
(1.4301, 1.4401, 1.4571, 1.4404 ...), etc. ..
• Brass, bronze, aluminum, copper, TITAN
• all types of plastic

9 Mix

We manufacture batch sizes from 50 pieces, annual amounts to 50,000 pieces. We manufacture any items and no mass parts.

Visit our website

Perforated products
standard and taylormade

http://www.bgpolis.eu/index.php?tab=4&lg=en&id=1090
Repair Machine Shop In Vratsa Bulgaria
Development, design, manufacture, repair, installation and dismantling of vessels and pressure equipment, heat exchanger
equipment, pipes, pipelines, steel structures for the chemical, petrochemical, metallurgy, food
industry, energy and construction.
  1. Repair and reconstruction of: vessels under pressure.
Pipelines for steam and hot water. Steam and hot water boilers, except boilers. oil and
oil product pipelines. Steel distribution lines and equipments to them and steel industry and building gas
natural gas plants. Steel gas saorazhenich and systems for liquefied carbon gases. hoisting
cranes and tracks them, hoists, lifting bodies and removable lifting accessories
2. Keeping hoists and bridge and gantry cranes and tracks them.

Roestvaststaal Apparatenfabriek Het Noorden is complete involved in engineering and manufacturing of process tanks and installations for the pharmaceutical and fine-chemical industry. The pressure equipment will be engineered and manufactured according the PED. Additonal the complete progress of the engineering and manufacturing of this high quality process equipment for the farmaceutical industrie is based on the cGMP and FDA guidelines.

An immaculate quality and a service that leaves no wish of our customers open - these are the maxims which we have set ourselves since the founding of our company to the destination. In particular, the breadth of our services makes us a major role.

From the Lohnbiegerei on the manufacture assembled workpiece series to an elaborate cooperation with our logistics partners. So you have the possibility to give making your trades needed from AZ in reliable and experienced hands.

In this way, since our inception, we work for a variety of industries such as the marine industry, the Locksmith Industry For Buildings, architecture and interior design scene, or even for different areas of the manufacturing industry. Give us a try. Send us your inquiry. We will send you an individual offer - even if `s has to be fast.

We turn all common materials and tube strengths.
Even such complicated shapes such as handrails for staircases are manufactured precisely and professionally.As a single unit or in series.


Roll region (CNC machine)
• Round tube: Diameter 10 mm to 76.1 mm
• Square tube: 100 x 60 x 4.0 mm, small. Diameter of 2000 mm over 60 mm side
• Square tube: Up to 80 x 80 x 4.0 mm, small. Diameter 3000
• Flat Iron: 120 x 15 mm, small. Diameter 3000 m

Mandrel bending area (CNC machines)

Steel:
Diameter 12 mm - 60.3 mm

Stainless Steel:
Diameter 12 mm - 60.3 mm

Smallest bending radius Rm = 1.5 x D

Since the establishment of our company, we deal exclusively with the forming of tube. The production of pipe bends, pipe bends similar parts and tees or extrusions for all possible areas of application are our core competencies.
With its own development, continuous optimization of manufacturing processes and the preparation of the corresponding technical production means - from the special tool to the entire machine, we can offer a wide range around the cold forming tube. Here, we mainly use austenitic stainless steels, but also NBK steel, seamless, CuNiFe, nickel-based, duplex, super duplex etc.
In the field of stainless steel welding fittings we are regarded as a premium manufacturer in Europe

Method:
- Cold bending over mandrel having a tool pool of over 650 forming tools
- Hydroforming (high quality in the tolerances and shape)
- Cold poking
- Necking (eg tee and similar)

Industries:
- Chemical / Process Engineering
- Food
- Pharmaceutical
- Aspetik
- Pigging Technology
- Exhaust Technology