Milling 3 axis to 5 axis simultaneous 2 Progr Progr places with Cimatron software All materials which are machined Sharing 30% VA 40% Steel 25% Al residual copper and Sondermat. Demanding milling 3 to 5 axis milling and hard

We are a company whose main focus is the creation of smart engineering solutions in the field of new product development (ideas) and their physical implementation through high-tech CNC production. Quality, service, trust and value!

Since the company was founded, we have been developing and manufacturing geotechnical measuring instruments at our headquarters in Leoben. As a service provider, we also take care of the installation of the devices, the measurement process and the final data evaluation, we pay particular attention to practicality and robustness in our product range. In order to guarantee maximum customer benefit, as a provider of complete solutions, we also sell instruments from other manufacturers as appropriate.

Metalworking

Precision since 19971958 Foundation of VEB Schrauben- und Normteilewerk Hildburghausen After Reunification, the company is broken up and the turning shop is taken over 1990 Conversion to Verbindeelemente GmbH 1993 Privatisation of Verbindeelemente GmbH and continuation of activities by TORNO Verbindeelemente GmbH 1997 Purchase of fixed assets and inventory by Maier Automatendreherei GmbH in Dunningen, Baden-Württemberg, and foundation of Maier GmbH & Co. KG on the former “Schraube” industrial estate. 1998 Initial certification in accordance with DIN EN ISO 9001 2005 Construction of a new production building on own premises in the “Schraube” industrial estate. Creation of 5200 m2 production area and 500 m2 administrative area. 2006 Initial certification of environmental management in accordance with DIN EN ISO 14001:2004 and introduction of an integrated management system. 2007 Finalist Award of the “Großer Preis des Mittelstands” (prize awarded to Germany’s most successful medium-sized enterprises)

• forms and jigs • mold and composite casting in all common aluminum alloys • Machining in CNC technology • 3D coordinate metrology We have for decades been an established company in the metalworking industry and place the highest value on quality and delivery. In "altmann" high-quality molds and composite casting is manufactured in all common aluminum alloys, for unit weights of 30 g to 3.5 kg. Our annual output is about 200 tons.

We specialize in the manufacture of drive elements such as Timing belt pulleys (focus) Sprockets Poly-V and V-belt pulleys -Klemmverbinder/Klemmplatten For timing belt Gears Turning, drilling and milling parts In addition, we provide timing belts in almost all versions and divisions (Neoprene / PU / Flex / welded / processing such as punching, grinding, coating, etc. is possible)

The Karl Hoch GmbH is a family of 3 Generation with currently 40 employees. We, the Karl-HIGH GmbH, dominate as one of the few companies on the market almost all metal cutting process for large components, because we have a comprehensive range of machines. Our equipment and experience of our employees are the foundation of our competence. It includes the machining of large parts with high precision, the mass production of difficult to machine materials and repair of complete machines and motor units. The name stands high for over 75 years for reliability and customer focus.

As a result of our flexible production strategy, we offer products in a wide variety of areas from automotive industry to durable household goods.

As a classic supplier, we manufacture ready-to-install turned parts according to customer requirements from all common materials such as free cutting steel, high-alloy steel, aluminum, non-ferrous metals and various plastics. Our machine park consisting of CNC-controlled long and short automatic lathes enables us to produce turned parts in the diameter range from 2mm to 42mm in small to large series. Our customers include companies from the following sectors: - Mechanical engineering - apparatus engineering - metalworking - Electrical engineering - Building technology - plastics technology Based on our many years of experience, we are happy to support our customers in the creation of new products and advise them on request regarding the choice of materials and the workpiece geometry.

Officina Meccanica Marche - Meccanica IMS, based in Civitanova Marche, carries out its activity in the sector of mechanical machining with the production of custom mechanical components, from the creation of prototypes to supply of small and medium-sized lots for the agricultural, oil, drilling and components sectors in general. The company, taking advantage of the continuous change of the reference market, has built a qualified, professional team with over ten years of experience, currently also supported by younger forces. The technologically advanced machinery and the production capacity allow us to fully satisfy every request, thanks to the help of a large CAD-CAM department. Professionalism and technology are the means by which the company intends to satisfy its customers.

MK MATERIAL is a dynamically developing company in the field of production and trade. The company's wide range of products mainly includes products manufactured in accordance with the requirements of the PN-EN, DIN and ISO standards. At the same time the company is realizing orders for carbon steel, alloys, stainless steel, copper, brass, polyamide, polyurethane, delirin, etc. products in accordance with customer specifications (photo, technical drawing, sample, etc.). In addition, the product range includes fastenings, clips, zamak and plastic end fittings made in own moulds. Production is carried out in compliance with the requirements of the Quality Management System ISO 9001: 2015. MK MATERIAL conducts activities aimed at creating a company with high value and brand awareness, supported by many years of experience and necessary actions leading to the development of the company.

Industrial Design - Metal - Machine - Engineering

As a highly specialized manufacturer of sensors and measurement electronics with almost 50 years of experience, we have the knowledge and equipment to design and manufacture complex fine-mech components, assemblies and electronic circuits. If your project requires this knowledge, we will be happy to develop components for you and take over their manufacture. Centerless grinding / through grinding Outer diameters from ø 0.7mm to 20mm and lengths up to 3000mm Centerless grinding / bar grinding / rod grinding / tube grinding Flexible and unstable geometries such as springs, tubes, hoses, rods, etc. Materials: steel, stainless steel, titanium, cobalt-chrome, PTFE, PEEK, POM, aluminum Production of turned and milled parts Conventional turning as well as CNC turning and milling Steel, stainless steel, aluminum, brass, bronze, nickel, titanium and various plastics bar machining from 5 to 80mm diameter, 200mm in three-jaw chuck maximum turning length up to 500mm, milling parts up to 300mm x 300mm, 10kg construction and creation of 3D data and drawing derivations TIG welding manual / CNC TIG welding Manual and CNC TIG welding of steel and stainless steel Single parts up to 1000m length and part weight up to 10kg Including design and manufacture of welding gauges and auxiliary fixtures Highest quality requirements with welding approvals If required, various welding seam tests / quality tests Laser welding and laser / photon beam welding in vacuum Welding of smallest components and thin wall thickness (membrane) Low heat input and therefore minimal distortion High welding speed with best cost efficiency Welding of metals with different melting points Vacuum welding for critical materials like titanium, etc. Single parts up to approx. 1000m length and part weight up to approx. 10kg Development of electronic circuits Development / schematic design of electronics in the field of measurement technology PCB layout / board design / circuit board unbundling and optimization Construction of functional samples / prototype construction / initial sample series Graphical user interfaces for PC or embedded systems Driver development for Linux, Windows and Mac Firmware development for microcontrollers Production of electronic boards Printed circuit boards Production of electronic boards according to customer specifications / blueprint Small to medium series production in the quantity range of 10-1000 pieces Testing / optimization of circuits and implementation of adjustments SMD basic assembly and conventional soldering of components for customization

MECABOSCH, is a machining workshop with more than 45 years at the service of the industry, with extensive experience in mechanization and productive know-how, which has allowed it to build customer loyalty, always providing an adequate response to their demands. With a qualified team of 40 people, and facilities of more than 3,000 m2, including 600 m2 for assemblies, we offer a comprehensive service to the engineering and manufacturing industry of machinery and capital goods.

precision aluminum die-castings • high/low pressure and gravity die-casting • 34 years experience • highly cost competitive • machining service and surface treatment • engineering and tool-development service • production of complete assemblies service and order managmement from Munich/Germany – cost competitive production in India • highest production standards, state-of-the-art machinery, highly qualified staff • secure and reliable long-term supply chains • express order service • smaller quantities possible • full logistics and warehouse service in Germany

Ottmar Schiek Maschinenbau was formed in 2013 with the takeover of Manfred Kriwet Düsseldorf. Wolfgang Harings founded. We have many years of experience in the field of sample production for materials testing, including foundries, heavy engineering, heat treatment, welding process technology and pipe manufacturers. We are specialists in the production of heat-resistant copper welding components and contact jaws as well as contract manufacturing in the areas of sawing, turning, milling and drilling. As an owner-managed company with one employee, we have many years of professional experience. The quality and reliability of our work are our top priorities.

TechX is a brand that specializes in industrial solutions. We offer a wide range of services, from turnkey systems to steel machinery manufacturing. With our extensive knowledge and experience, we handle every project carefully and offer customer-oriented solutions. With our expertise in machining, we process complex parts precisely and develop innovative solutions in the areas of engineering and project planning. We act on the principle of continuous improvement and innovation without sacrificing quality. We work hard to earn our clients' trust and contribute to their success.