It is better to light a small light than to curse the darkness. Confucius We cut with light. Therefore, expensive dies or consuming unnecessary machine configurations with us. As the only company in the Stuttgart region offers you the highest quality LUMICUT cutting and engraving services for individual and small editions. The latest laser technology allows it to cut paper, cardboard, rubber, foam, acrylic glass and many other materials very fine, with minimal cut marks and at reasonable cost or to engrave. We can work directly from digital data, we are in small and medium runs faster, cheaper and quality, as a classic punching or cutting methods. In addition to the pure wage cutting, advise and we keep you in your project from material selection to complete the design and implementation of your ideas.

KÖSTER: Cast components, cable winches and propeller pumps from our own castings The family business KÖSTER is a machine factory with its own hand moulding foundry. Our company history goes back to 1861. For seven generations we have represented values such as awareness of tradition and innovative spirit. We always adapt our product development to market requirements. Our product range comes from our own production and includes cast components, manual and electric winches as well as propeller pumps. We construct, we cast, turn, mill and weld until our Pumps Cable winches, manual winches and electric winches Bath technology, wave machines or lifting floors Cast components or steel components Steel hydraulic engineering and fittings are available to you ready for delivery or operation. Upon request, we will involve you in the development process and thus enable you to exert influence. Whether propeller pumps, winches or cast components: All of our products are designed to withstand the toughest conditions for many years. First-class service: assembly and overhaul Our range of services extends from design, manufacture and delivery of your goods to professional assembly, maintenance and repair by our experienced employees. We deliver complete assemblies ready for acceptance. We also offer our careful maintenance and repair work for third-party products. Reasons for over 155 years of success More than 155 years of success are the result of our customer orientation, whether in flood protection, other hydraulic steel structures or all our other business areas. In addition, the care taken by our employees in the development and manufacture of our products, the ongoing perfection of our propeller pumps, winches, cast components and other products are just as much a guarantee of success as the fact that KÖSTER, as a traditional hoist manufacturer, continues to be managed by its owner family. Our company has been certified according to DIN EN 9001 since 1995.

ORMAK was formed in 1998 as a privately owned company which is one of the first companies started to use CNC machine in the industry in Turkey. We proudly serve in manufacturing engineered parts and components in metals and plastics with 23 years experience. Our priority is focused on quality and service at competitive prices to our customers be they in the Automotive, Aerospace, Shipbuilding, Machine or any other industry. Today, we are happy to share with you our congratulation letter for being one of the first 1000 metals exporter companies in Istanbul.

Berdani stands for high-quality components in stringed instrument construction. In our workshop in Markneukirchen, Vogtland, components are manufactured by master craftsmen in combination with the latest digital technology. The result is a high-end product made from local wood, sustainable and 100% handmade in Germany. Berdani is breaking new and ambitious ground in the field of stringed instrument making. By using high-density domestic wood for the construction of components for stringed instruments, we want to contribute to the preservation of endangered tropical wood species. From tailpiece and chin rest to pegs and end button to fingerboard, you will find everything at Berdani. The handmade sets will ensure a perfect sound experience. Contact us Yours, Bernd and Daniel Hiller

High precision machining plant

We have been working on machining since 25 years, we have an outstanding team of engineers, a modern machine park and professional CAD/CAM software that allows us to comprehensively execute almost every order related to CNC machining. Our specialty is the production of details on CNC automatic lathes with diameters from 3 to 68 mm with the use of bar feeder up to 300 mm in semi-automatic operation. We mill in materials such as: steel, non-ferrous metals, plastics, wood. All orders are executed based on the most modern numerically controlled machines, which enable us to process surfaces from 2D to 5D. We also offer a wide range of services: engraving, drilling, threading, sanding, polishing, painting, electroplating coatings. We specialize in large-scale production of more than 5000 pieces. We also realize medium orders from 500 to 5000 pieces. In special cases, we make prototype series and individual orders.

For more than 20 years we have been producing and supplying high-quality precision turned parts according to customer-specific requirements. Quality is our top priority. Our ISO 9001 certification is the key to meeting your needs and desires. Our goal is to satisfy you, because your success is our success. It is not without reason that you will find our products in gas, electrical and medical technology, pneumatic and hydraulic technology as well as in water-bearing fittings from well-known manufacturers. For us, it is a matter of course to meet the constantly changing demands of the market test with a high degree of flexibility and reliability, coupled with the associated adherence to delivery dates. This is German workmanship from Sauerland, made by Schenkel Drehtechnik GmbH.

Mekaltek is a company specialized in metal processing. We act as a contract manufacturer for leading press plants in our region, including well-known companies such as Erdoğanlar Alüminyum, Zinca Metal, Bor Alüminyum, Ersaş Alüminyum, Gülsan Alüminyum, Sistem Alüminyum, Burak Alüminyum and Arfen Alüminyum. Founded in 2021 with a CNC machine, we are now the largest and most capable mechanical processing company in our region with 15 CNC machines, 5 punch machines and 7 saws. That is why around 20 extrusion companies in our region trust us and have their mechanically processed profiles manufactured by us. In addition to aluminum processing, we aim to create a separate area in the same factory for mechanical processing of steel materials, laser cutting machines, tube laser machines and robot-assisted welding work. Our goal is not only to offer our customers excellent service, but also to offer them all services from a single source. Mekaltek aims to become a fully integrated processing center. As a result of our many years of experience in the industry, we have many close friends who work as plant managers, surface treatment managers and planning managers in the extrusion plants in our region. That is why we always have up-to-date information about which plant has spare capacity, which manufacturer has the best surface treatments and what capabilities the factories have.

Development - Design - Manufacturing - Service Whether prototypes, small batches or CAD data: The quality of the products and CAD data is our top priority. Shortest official channels for quick solutions: Talk to us, even if your delivery date is very short. True to the motto: “It doesn't work, doesn't exist.” Every customer is individual. Your requirements and wishes are important to us. We always follow the same approach: “There is a solution for every challenge. ”

It was founded in 1996 and currently employs 22 people. The company is located close to the border with Austria. The export share is approx. 98%; customers from Germany, Switzerland, Luxembourg, Austria, Italy and Belgium are supplied.

The company was founded in October 2022. The main types of activity are the production of parts for various industries, as well as the provision of metalworking services. Our production is equipped with modern 5-axis CNC milling machining centers from DMG. We offer a wide range of services, including the design and modeling of parts according to the drawings and sketches of our customers, the provision of consulting services, and the manufacture of parts of varying degrees of complexity. We provide 3-, 4-, and 5-coordinate milling services on CNC machines with an accuracy of up to 0.01 mm.

MICHAEL was founded in 1981. Since then, we have continued to develop. Our goal was clear from the start: to offer customers a top-quality product that is manufactured using the latest technologies and makes maximum use of the full potential of a qualified and experienced team of employees. And this is how we act: uncompromisingly solid. Relations with our customers have always been based on the principles of good cooperation and mutual respect. The vote of confidence that our partners place in us is often long-term cooperation with them. More than 35 years of experience, combined with continuous improvement of processes, modernization of machinery and the application of ever more demanding quality standards, secure our leading position on the market.

Our activities include the production of parts and assemblies for machinery and plant engineering.

Our team consists of experienced experts in the field of CNC metal processing. Every member of our team strives to achieve the highest standards of quality and precision with every piece that leaves our workshop. We update regularly to keep up with the latest trends and technologies in the industry and provide you with the best service possible. We understand that every project has its own unique requirements. That's why we approach every task with care and commitment to ensure we meet your specific needs. Our adaptability and rapid response to changing market requirements make us a reliable partner you can rely on. DIAMETER: =2 — =20 MM QUANTITY: MEDIUM AND LARGE MATERIAL: STEEL, STAINLESS STEEL (INOX), BRASS, ALUMINUM

Our machining services inlcude: CNC drilling,milling and turning. We machine parts from steel alloys, stainless steel alloys, aluminium alloys, brass, copper and plastic. All of the surface threatments are avalaible after machining proccess.

PS Engineering based in Wołomin, ul. Żwirki i Wigury 10, was founded in 2008. We are a family company founded on the initiative of the growing research and engineering sector in our region. Passion and demand for unusual elements, structures and non-standard solutions that require the use of cutting-edge CAD/CAM design and CNC production technologies have allowed us to develop KNOW-HOW and our machinery to satisfy even the most demanding customers. Thanks to modern CNC machines and conventional machine tools, we can offer you the highest quality services for virtually every phase of design or production, such as precise machining — including CNC turning and milling, welding, electrical eroding, 3D modeling using the FDM method, or surface cleaning and painting. In order to meet the expectations of our customers, we are in the process of implementing the ISO 9001 standard

Manfred Schell GmbH Manfred Schell founded his company in Saalfelden/ Austria in 1994. The company, Manfred Schell GmbH, is still located in Saalfelden today and has also been an important training location for apprentices since 2001. The 4-year training with a focus on mechanical engineering and machining technology offers the ideal conditions for starting a successful career. The former regional customer base has developed well over time. Today, customers from all over Austria, Europe and also worldwide make use of reliable, innovative potential for technical problem solutions of all kinds. Since January 2020, Manfred Schell GmbH has had a new shareholder, namely bwebsystems s.r.l. This will also result in additional strategic, technical and commercial synergies. Current and future customers will benefit from the offer and service options.

Fully digitized milling and turning processing in Berlin. At Part S, we have minimized turnaround time and specialize in processing individual parts and small series (up to approx. 1000 pieces).

Dear ladies and gentlemen, As a leading company in automation technology, we are partners of well-known manufacturers in the automotive, furniture and electrical industries, as well as many other sectors. As a result of our continuous growth, we are always looking for suitable and reliable customers. In addition to high quality, we attach great importance to excellent communication. Everything from a single source In accordance with the maxim “Everything from a single source”, Discher Automatisierungstechnik GmbH guarantees the professional and individual processing of customer orders - in particular with regard to the feasibility of special solutions. Thanks to a high level of vertical integration, we completely cover all areas of mechanical engineering and control technology. From consulting and design to manufacturing, assembly and commissioning to professional after-sales service. We offer complete solutions for: ☑️ Individual robot applications (handling, assembly, testing technology, etc.) ☑️ Assembly, adhesive and joining technology ☑️ Transport and logistics tasks relating to the internal supply of parts ☑️ Complex visualization technology combined with handling and assembly applications as well as for quality assurance ☑️ Automatic testing systems ☑️ Technical production support

ADRETEC ESTONIA OÜ specializes in CNC machining, focusing on large-sized parts for various industries. Key Areas of Expertise: Large-Part Machining: ADRETEC has modern CNC machines capable of handling large parts with high precision, ideal for industries needing durable, reliable components. Custom Solutions: The company offers custom machining services, tailoring parts to meet specific client requirements with a commitment to quality. Advanced Capabilities: Equipped with high-tech machinery, ADRETEC performs complex milling, turning, and laser cladding, drilling operations, ensuring accuracy and quality standards. With a blend of experience and technology, ADRETEC ESTONIA OÜ is a trusted partner in CNC production for large parts.