We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes.

We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us.

With 170 machine operators and 120 machines we make about 450,000 per year production hours.

We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000

In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation.

The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).

Turned parts

Frästeile

Assembly

precision aluminum die-castings
• high/low pressure and gravity die-casting
• 34 years experience
• highly cost competitive
• machining service and surface treatment
• engineering and tool-development service
• production of complete assemblies

service and order managmement from Munich/Germany – cost competitive production in India
• highest production standards, state-of-the-art machinery, highly qualified staff
• secure and reliable long-term supply chains
• express order service
• smaller quantities possible
• full logistics and warehouse service in Germany

Our company was established in 1955. The operation is continued in the second generation since 1979. Nearly 700 companies are among the world our satisfied customers.



About 45 employees are currently ready to implement your ideas and wishes. Highest customer satisfaction and total quality control are our objectives.

State of the art production and measurement equipment in a new functional, clean production building support our young team of professionals in this endeavor.
Gentle Rochester dealing with cutting oils and cleaning agents reduce the environmental loads at a very low level.



Small and medium series, especially in difficult to machine materials, are our strength.

ALL FROM ONE HAND
You are looking for the complete production from a single source?

Put on the right partner, because it gives you the necessary freedom for your core business.

Send us your drawings, we will organize the rest. We procure the material, edit the parts, ensure the coating and monitor the entire production process, until you can use the pre-finished workpiece on time available.

Axentic d.o.o. (u Bosnia. Herzegovina) with headquarters in Gradiška has specialized as a supplier of high-quality production parts. With years of experience in machine and plant engineering we were able to establish very good in the domestic and European market.

Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors.

With this basis, we are happy to solve your challenges!


OUR EXPERTISE

We place our focus on products that we have been perfecting.
In order to offer our customers perfect products, we focus on the following areas of expertise:


• Milling parts

• Turned parts

• weldments



Especially in the mechanical engineering, plant engineering, transmission engineering, railway and transport technology, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured

Milling parts:

Amounts:
Small, medium and large series
Dimension:
Max. 500 x 1200 mm

Material:
Steel, stainless steel, nonferrous metals, plastics

Surface Treatment
possible in cooperation with long-standing and reliable partners

Turned parts:

Amounts:
Small, medium and large series

Dimension:
Conventional machining: max. D = 220mm

Material:
Steel, stainless steel, nonferrous metals, plastics

Surface treatment:
possible in cooperation with long-standing and reliable partners

Welding:

Amounts:
Small series

Weight:
Max. 3000 kg

Material:
Steel, stainless steel

Welding Types:
After method E111, TIG / 141, MIG / 131, MAG135 / 136
Welders have valid certificates in accordance with EN 287/1

Surface treatment:
possible in cooperation with long-standing and reliable partners.

Surface treatment:

Anodizing
Chroming
Blacking
Painting
Galvanizing

Heat Treatment:

Gas nitriding
Vacuum hardening
are also available on request


Quality Responsibility


"The customer comes back, not the product"

So just clear and accurately is our internal motto.

Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by gentle and steady growth of the company and by absolute customer satisfaction.


Challenge us with your requests!

Axon Engineering (legal name Axon Michanologiki S.A) was founded in 1985 as a– precision Greece engineering
manufacturing company. Axon employs some of the most skilled professionals in our industry combining
engineering expertise and over 36 years of technical experience.

Our aim is to offer our customers a complete Engineering solution by maintaining good lead times, on-time
delivery, quality and reliability at competitive prices. We provide our customers all the necessary services of a "one
stop shop” supporting them through the full production cycle, all the way from sourcing and manufacturing to
assembly, delivery and after sales support of the products.

Axon manufactures a wide range of products for companies in sectors such as aerospace, defense, electronics, naval, optics and
telecommunication. One of our areas of expertise is built to print maintenance tooling, ground support equipment and fabrications for the
commercial and military aerospace industry.

Capabilities
 Project Management
 Design (CAD/CAM), R&D
 CNC & Conventional Machining
 Welding per ASME Section IX / EN Standards
 Non-Destructive Testing / Load & Pressure Testing & Inspection
 Surface Treatments & Special Finishing Processes (Nylon coating, Chromate Conversion - Alodine, Black Oxide, Phosphate, Paint)
 Assembly & Special Fabrications Area
 International Procurement and Delivery

Quality
 ISO 9001:2015
Certified by TUV Austria
 AS9100 D
Implemented -
Certification in process
 CMM Mitutoyo
Romer Absolute Arm

Precision swiss lathe parts maker

For all your spare parts and high performance valves