Turning: receive an avg. of 7 offers per request

The SPL Precision Manufacturing Ltd. manufactures high-precision parts for industry. Special emphasis is on the production of components for main spindles of machine tools. When turning, milling, drilling and grinding of shafts (with HSK, SK or short taper), housings, cooling sleeves and end shields are modern CNC machines, such as the "C30U" Hermle AG for the 5-axis milling and the "KEL- VIVA "from Kellenberger for the external and internal cylindrical grinding to use.

SCHÖMA - In the team we develop traction! Founded in 1930, SCHÖMA - Christoph Schöttler Maschinenfabrik GmbH - is a manufacturer of rail vehicles and specializes in the development and production of customized, individual transport solutions. Especially in tunneling, SCHÖMA locomotives are used in almost every well-known underground construction project worldwide. Shunting and factory locomotives for in-plant transport in the raw material-producing industry as well as service and maintenance vehicles and special locomotives for use in amusement parks are also included in the scope of delivery of SCHÖMA. On the basis of an economical modular system, SCHÖMA offers its customers a large variety of equipment and variants. Our designers develop individual technical solutions for a wide variety of rail transport problems. With the delivery of a locomotive the job is not done for us. Our fitters take over the commissioning of the locomotives and the briefing on site For decades we guarantee a secure worldwide spare parts supply. In addition to the technical individual transport solutions, we offer corresponding economically customized solutions that relate not only to the individual payment and delivery conditions but also financing and rental of locomotives. For tunnel construction projects, we will take back the locomotives after completion of the projects on attractive terms on request. Quality comes from qualified employees who judge and act on their own responsibility. Our work processes are organized transparently, responsibilities clearly regulated. The quality management system has been successfully certified according to the regulations of DIN EN ISO 9001: 2008. Our company is certified according to DIN EN 15085-2 for the welding of rail vehicles and vehicle parts. SCHÖMA product range Our strength lies in the development and production of locomotives and rail vehicles in customer-specific design, even for the smallest quantities up to lot size one. Underground and tunnel locomotives For tunnel gradients up to approx. 7%, we have developed a special drive system that ensures the necessary traction even under poor track conditions. Factory and work locomotives For such applications we develop shunting locomotives up to approx. 80 t weight and 700 kW engine power in all worldwide standard gauges. Our references cover steel and building material companies as well as the chemical industry. Special rail vehicles For special transport requirements, we offer locomotives, which are usually required in small quantities for special purposes. These are tourist railways and amusement parks as well as working and light rail locomotives, which are mainly needed for narrow gauge rail networks.

Meccanica Oriente Srl is a precision mechanical workshop that has been operating in the sector for over 50 years. The main activity consists in the construction of mechanical parts related to industrial plants and machinery. The company specializes in mechanical processing for third parties, special equipment and automation systems for industries. The strengths are the use of advanced machinery and the long experience of a highly qualified staff.

Franke Industries is the leading expert in the production of hot gas components for the energy and aviation industries. Sustainable partnerships with market leaders enable us to maintain our capacity to supply components for the latest turbines and engines. Franke Industries is a member of the Artemis Group. It is based in Aarburg, Switzerland, and Ampfing, Germany, and currently employs around 140 people with net sales of CHF 32 million in 2019.

Individual, small series and custom-made stainless steel turned parts We have modern machinery at our disposal for individual, small series and special production of stainless steel turned parts in diameter ranges from 5 to 1400 mm. CNC lathes 2x turning diameter 550 mm x 1500 mm turning length 1x turning diameter 650 mm x 1500 mm turning length 1x turning diameter 830 mm x 1500 mm turning length 1x turning diameter 1450 mm x 1700 mm turning length CNC vertical machining centers 1x 1100mm x 650mm x 600mm 1x 1600mm x 850mm x 700mm Conventional lathes 1x turning diameter 670 mm 1x turning diameter 1000 mm Benefit from our high quality standard through modern machinery. Adherence to deadlines and speed are a matter of course for us. Do you have any questions? We are always at your disposal for further information.

New Standard is a trusted Ukrainian metal processing company specializing in high-precision CNC machining, offering a full turnkey service—from design to production of complex parts. With advanced milling, turning, and grinding machines, we ensure consistent quality and precision. We serve industries like automotive, aerospace, medical devices, electronics, defense, energy, construction, consumer goods and robotics, delivering tailored solutions with reliable supply chains despite regional challenges. With hundreds of completed orders, we guarantee quality, precision, and dependable partnerships. Visit us at new-standart.com.ua.

Maso attend to direct contacts with the foundries and gives the customer to pick up the possiblity, his requirements for all steel castings as well as Grey cast- and Spheroidal graphite cast iron, Aluminium and its alloys castings directly with it with the supplier in Turkey and China. Unknown intercession offices slip it. As production processes to the disposal are Sand casting -machine moulding, investment casting, die-casting for low, middle and big deries, roughly and ready processes. Maso takes over the first sample care until the series maturity. The customer can order directly after it. The same profile offers Maso for drop forged parts, sheet metal stamping parts and vehicle rims.

CME is a referenced highly specialized mechanical engineering in turning and milling CNC performed at the customer's design. Quickly, accurate, organized the CME is a reliable partner for small and medium range and also for the production of single components. We perform acts assembly jigs and welding, construction of automation in customer design and small welds. We work all kinds of steel, the various variants of aluminum, plastics, and still bronze, copper and brass.

In our, in 2000 newly opened modern requirements of production and rehabilitation justice to the workplace, we produce under the expert guidance of qualified engineers, foremen and skilled workers in two buildings with more than 200 disabled and non-disabled employees for the industry in the areas of: - Industrial and electrical installation - Metal processing - Plastic manufacturing and processing - Packaging and packaging Our services are in accordance with § 55 SchwbG creditable against the countervailing charge with 50% of net job performance.

M.D.M. was founded in 1996 operating in the automatic turning sector. In 2001, adapting to market requirements, it settled in its current headquarters in Bastia di Rovolon, completely renovating its machine park to dedicate itself exclusively to C.N.C. technology, specifically 3/4/5 axis turning and milling. A metrology room is also set up which, equipped with the most modern measuring technology, guarantees the quality of the finished product. M.D.M. is therefore able to provide a certification of conformity of the machinings performed for those Companies that require the Free-Pass delivery system. MDM also makes use of a Cad-Cam station, to design and draw any detail according to the specific needs of each customer. Our ambition is always to give the maximum professionalism, to give life to your ideas.

Company KADING gathers experienced engineers who have developed their skills on projects which have required multi-disciplinary knowledge (mechanics, hydraulic, etc.) Our competences: Engineering services: - conceptual product development - 2D/3D product design - reversible engineering - optimization of products and manufacturing processes - calculations and FEM analysis, - preparation of production documents (technical drawings, technologies) - creation of related documents/documents for users (spare parts catalogs, operating and maintenance instructions) - preparation of documentation for product certifications - product visualization (rendering) We are providing services with licensed CAD software SolidWorks (2 Premium + 2 Standard) and Solid EDGE 2019, with the possibility of EPDM integration (total 4 SW PDM Professional licenses). Our engineers also are familiar with other CAD systems (CREO, CATIA, Inventor) so we are also able to support you in that area, dependable on the project and its duration. Manufacturing & prototyping: Together with our partners, we are also offering the following services: - Milling & Turning - Welding (MIG / TIG) - Cutting (plasma / laser / waterjet) - Bending - Punching - Assembling (mechanical / hose / welded) - 5 axis milling We have successfully implemented a quality management system according to ISO 9001:2015 into our business processes which shows our dedication to providing quality and best possible services to our clients. We are inviting you that you allow us to present our services and we wish that your company becomes part of our satisfied customers.

Since 1947, we produce for our customers and maybe soon for you high quality castings. By using the latest technologies and know-how, we face the greatest challenges of our customers and we can therefore claim on today's performance-oriented market as a medium-sized company. We offer: - Casting - Hand molding - Gravity die casting - Machine molding (sand casting) - Model - ....

Geiger + Kamer The company's roots go back to 1985, when Rolf Geiger founded a sole proprietorship in Embatingen. After only three months Hans Kamer had to purchase his first day in business, thanks to tireless effort succeeded in 1987, the first CNC lathe and the first CNC milling machine. Today we only 90% manufactured by modern CNC machines. Precision work is in the company at the forefront. Order and quality awareness are therefore imperative. Thanks to our employees we can achieve these goals. Our key to flown to say: Not cheap, but "price-value"! Translation by Google Translate

Our company was founded in 2013 as a 100% Hungarian-owned company. We manufacture medium and large series parts with Index type cutting machines in a 400m2 production area. According to the customer's needs, we perform the washing, packaging and laser marking of the parts.

A HEARTFELT HELLO! It's nice that you're here Hans Sack Edelstahl- & Behälterbau is your trustworthy partner for tailor-made stainless steel structures, container construction, steel construction and precise single-part manufacturing using CNC machines. Our company is based in northern Germany, in Flensburg, and is characterized by many years of experience and a strong commitment to quality. We are proud to offer high-quality solutions for a wide range of applications.