Your competent partner for manufacturing mechanical products on CNC-controlled processing machines.

VETEC Zerspanungs- und Feinwerktechnik GmbH has been successfully manufacturing complex mechanical individual products and assemblies for over 30 years. The focus is on both single-part and prototype production as well as series production for small and medium-sized quantities according to your specifications. We see ourselves as an innovative manufacturing company for high-quality precision engineering.
A creative team of highly trained specialists, technicians and engineers enables the efficient implementation of individual manufacturing services with consistently high quality.
Our motivation, continuous modernization of our machinery and close cooperation with our customers are the basis of our corporate success.

performances
As a competent partner for CNC machining, our long-standing customers particularly appreciate the close cooperation in optimising their projects for production and comprehensive advice on the selection of possible materials and surface and material treatments. We can draw on over 20 years of experience here.
Our specialty is primarily high-precision and complex components. We have a lot of experience in processing a wide variety of materials.
With regard to technical requirements and project management, we respond flexibly to the wishes of our customers.
We work for a wide range of sectors of the economy. Our customer base includes companies from the automotive industry, medical technology, aerospace, the electrical industry, many companies with innovative products, research and development companies and much more.

We offer you the following services:
CNC turning
CNC milling
Customization development and construction during production
Assembly of components
Finishing according to our service profile (see brochure and website)

About Water Jet



The Waterjet Group has over 25 years experience in the field of water jet cutting technology. Water Jet Sweden AB is the leading manufacturer of waterjet cutting machines. By working closely with the equipment manufacturer, Waterjet SWEDEN AB, we are constantly on the cutting edge of technology.



Our powerful, innovative contract-cutting company was founded in May 1999, is headquartered in Neustadt on the Wine Route, just off the A 65



We have successfully taken on the task to act as a competent and supra-regional service provider for industrial and craft.



We work with our qualified personnel in the 2-3 shift operation and offer our customers:



good price-performance ratio
strict adherence to deadlines
Quality awareness


what makes us a certified supplier to the aviation and aerospace industry.



We work on:

Stainless steel, aluminum, high alloy steels, titanium, Hastelloy, copper, bronze, special materials, etc., up to 200 mm thickness. Films, gaskets, rubbers, foams, composite materials, carbon fiber, textiles, in parallel with up to 6 cutting heads.



Through our modern CAD, programming and CNC systems and our efficient machinery, we are capable of economic production to ensure the item to the series part.



We have a well-stocked warehouse. We are happy to demonstrate to you our performance in our wage cutting center.

ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic.
Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners.
We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use.
In addition, we can support you with the construction or simply with the data transfer for 3D models.

2R Industries offers the expertise of its team and its experience
in the implementation of this technology and has a range of machines capable of solving
the main problems of cutting and trimming of your materials.

- Machine pure water
- Machine thick
- 5-axis machine

The development of cutting programs in 2D and 3D is performed
using CAM software from:

- Files
- Parts Models
- Plans
- Definitions Digital (all platforms)
- Drawings ...

- Cold cut so no heat affected zone.

Speed
- No tools to achieve, which results in short time.

Accuracy
- Pure water of the order of + / - 0.1 mm for materials of low hardness,
according to thickness.
- Water + abrasive: the order of + / - 0.05 mm for hard materials according
thickness.

Certifications:
Quality system in place referring to ISO 9001 V2000
for our certification

Reactivity
- Implement without delay the changes requested by our
customers.

Flexibility and availability
- Internal organization for dealing with occasional overloads.
Our internal organization

As a specialist for plastic processing, based in Ahaus, we are among the most powerful and flexible providers in NRW and far beyond.

As an established family business, we have, since establishment in 1998, constantly expanding and edit plastics for the most diverse applications, with a very modern machine park.

Conscientiousness, precision and reliability characterize our team of qualified plastic working professionals and designers.

Flexibility, punctuality and defined workflows are the highest of our daily work.

As a customer, you can rely on these properties and be assured that despite all the automation and high utilization, always a high degree of individuality and reliability is offered.

Our range of services includes - from complex single piece up to the large-volume series products - the complete range of innovative plastics.

Our team is always available and accompanies you from development to delivery.
Talk to us!


Production possibilities

At about 2,000 square meters production area we work at the highest technical level of plastic products.

The data provided by you (eg DXF, DWG), and provided drawings will be processed cleanly and efficiently by our trained personnel.

Depending on the product and requirement we use the latest, supported by CAD / CAM, CNC machines.

CNC - milling • 3 Axis
Workspace x • y • z
610 x 510 x 610 mm
760 x 510 x 610 mm
1000 x 610 x 610 mm
2,400 x 500 x 400 mm
3,000 x 1,250 x 600 mm

CNC milling machines • 4 axes
Workspace x • y • z
2,400 x 500 x 400 mm

CNC - lathes
max. Bar passage - Ø 85 mm
max. Turning diameter - 300 mm diameter
max.Distance between centers - Ø 500 mm
Turning with driven tools

Milling machine
max. Length - 6,000 mm

Water jet cutting
max. Size - 3.000 x 1.000 mm
Strength - up to 20 mm

Materials at a glance

Basically, we handle all thermoplastics, thermosets and elastomers.

PP - polypropylene
PA - Polyamide
POM - Acetal
PVC - polyvinyl chloride
PETP - polyethylene terephthalate
PVDF - polyvinylidene fluoride
PTFE - polytetrafluoroethylene
PEEK - polyetheretherketone
HGW - hard tissue
PUR - Polyurethane

The John Banholzer Metallwarenfabrikation GmbH is an owner-managed, medium-sized companies in Berlin, which has been operating for more than half a century as a manufacturer of forged parts, especially for the automotive industry.

Our core competence lies in the metal forming. We manufacture high quality stamping, bending, - and drawing parts of varying difficulty in a variety of lot sizes.

With our modern stamping and transfer machines with a pressing force 50-320 t we can edit tape material comprises from 0.1 up to 6.5 mm for all common steel, stainless steel and non-metal materials and even stamping gold-plated circuit boards as well as two deep drawing presses 115-250 tons of force also manufacture deep drawn parts.

To our manufacturing range includes the manufacturing of sheet metal and welded assemblies by welding and assembly fixtures.

The basis of our performance in the series production represents the tool and fixtureThese include conception, design and construction of optimally designed for the purpose of tools in close cooperation with our customers. Following these ideas, we build bending, embossing, cutting, thermoforming, and Progressive and transfer dies.

We also manufacture prototypes, pre-series and patterns cheap and quickly with the help of standard tools, devices and support tools.

Every day it inspires us, that for many years then, leading companies in the automotive industry such as Daimler and ZF at us, and customers from other industries such as Bosch-Siemens in the household appliance industry, Otto Bock HealthCare from the medical and Siemens in the energy trust us.

In recent years we have expanded our production portfolio and expanded our capacity in the hybrid region, especially in case of power rails for batteries.