The Rampf GmbH was founded in 1967 in the beautiful Rettenbach market in the Lower Allgäu and was modernized constantly over the years.

A continuous development in quality and processing possibilities unites our company still with customers from the very beginning, as were new customers from industry and trade to be won.

The successful cooperation with our customers is very important to us.

Our focus is in the manufacture of complex components up to series parts in the fields of CNC machining, CNC turning and CNC milling.

For us there is a modern CNC machinery with lathes and milling machines available and guarantees the highest quality standards.

Raytech provides services for (micro)lasercutting, (micro)laserwelding and value engineering.

Unsere Dienstleistungen:

1.Laserschneiden:
+ Stahl bis 20 mm, rostfrei Stahl bis 12 mm, Aluminium (Legierung) bis 6 mm.
(Maximalformat 1500x3000 mm)
+ Laserschneiden von Drahtgewebe und Metallgeflechte
+ Laserscheiden von Kunststoffen (Polyamid, POM, PET, HDPE, Polycarbonat, PMMA (Plexiglas)…)
+ Laserschneiden von Titanium
2.Laserrohrsschneiden: 2,5D Rohrverarbeitung (Rohren bis 250 mm Diameter)
3.Laserschneiden von Stents
4.Lasergravieren
5.Laserfeinschneiden: laserschneiden von Dünnblech, Feinblech und Präzisionsfolien aus Edelstahl ab eine Materialdicke von 0,01 mm (Shims, Unterlagen, Flachfedern, Blattfedern, Distanzringe… ) aus Edelstahl 1.4310 sowie Kohlenstoffstahl 1.1274.
6.Lasermikroschneiden und Lasermikrobearbeitung
7.Laserstrahlfeinschweissen (Mikrolaserwelding)
8.Wasserstrahlschneiden (waterjetcutting)
9.Value Engineering

Water jet cutting is a separation method for almost all materials. Here, a focused jet of water at high pressure is shot (3,600 bar) from a nozzle onto the material to be cut. To improve the cutting performance of the water an abrasive medium (garnet) is added. The beam thus acts as a thin blade, but without heating the cutting edge. The course of the sectional contour is determined by the latest CNC control. Waterjet cutting is therefore an extremely versatile environmentally friendly cold cutting process.

It can be easily cut materials such as the following:

Metal and metal alloys
for example, steel, stainless steel, aluminum, copper, brass

Composite and Structural Materials
for example, aluminum composites, laminates, fiberglass

Glass, stone, ceramic
eg glass, wired glass, laminated and bullet-proof glass, marble, granite, ceramics, tiles

Natural materials
as natural and laminated wood, cork, leather, rubber

Plastics
for example, fiber reinforced plastics, acrylic glass, foams

We are service providers in the metalworking sector.
We manufacture components for machine building, tool making and vehicle construction
build the finished components eg. as devices also together.
Our manufacturing capabilities include milling, turning, wire EDM,
Waterjet cutting, surface grinding and laser deposition welding.
Lot sizes of 1-500 pieces are not a problem for us.

We provide cost effective materials to meet with the Automotive Sectors’ continual search for light weight, robust and technically demanding sealing technology.
Our family business specialise in producing tailor-made solutions to meet individual customers needs in areas such as sealing, bonding, cushioning and noise reduction. Our product range includes adhesive backed and non-adhesive foams, tapes, rubber, felts and fibres, filtration media and much more.
We aid and assist in the development and design for custom-made components to your dimensional and technical requirements for use in interior and exterior seals, gaskets and trims. RGH work alongside 3M to provide VHB tapes converted into gaskets such as bonding tread plates, clips, sensors and other plastic components.
RGH work closely with 3M in order to recommend the ideal adhesive to suit your application so whether you are bonding plastics, metals, glass or fabrics RGH will be able to advise the perfect bonding solution.

A small range of examples of applications include NVH and sealing for Lights, Mirrors, Steering Systems, Instrument Panels, Heating and Ventilation, Air Conditioning Units and Door Closures and any areas that require sealing to prevent air, dust, water and oil ingress.
RGH has over 35 years experience of designing and manufacturing a vast range of seals and gaskets used in industrial and commercial applications.
We understand the complex design, material and performance requirements for effective sealing of gases, oils, chemicals, heat, water and steam and develop and manufacture high quality solutions to suit. Seals and gaskets can be manufactured to high tolerances in specific shapes in a huge range of materials including rubber, plastic composites and foam.


RGH design and manufacture components from an extensive product range in order to create the perfect solution for your application, first time.

MATERIAL SLITTING
- Continuous rolls or individual sheets
- Twin loop splitting machines
- Automated slitting process
- Precise thickness tolerance control
- Customer specific capabilities

ADHESIVE LAMINATING
- Adhesive lamination to substrate
- Single or double sided
- Finger Lift / Tabbed liner capabilities
- Single process lamination and slitting

DIE-CUT & STAMPING
- Digitally Controlled Tooling System
- CNC controlled die-cut process
- Die-cut individually or kiss cut on a roll
- Maximum utilisation of material
- Waste material removal

FABRICATION & ASSEMBLY
- Sub assembly
- Customer specific fabrication
- Bi or Multi substrate lamination

The company Rininsland Montage GbR is your partner for metal construction, steel construction, garage doors, etc. for the private, commercial and industrial sector. You can find out more about our extensive range right here on our website. Our certified specialist staff will be happy to advise you on site or at your home.

The family R. Kind GmbH for over 40 years supplying bespoke wrought products based on high-alloy stainless steels, nickel-based alloys, titanium and titanium alloys, among other things, for the chemical, oil industry and the nuclear field. Based on this know-how of high technology, we have expanded our activities to the field of warehousing and logistics solutions for the aviation industry. Here we focus on the storage of titanium gr5 / 3 7164 as a staff and in sheets / plates and aluminum bronzes. Where the highest demands are placed on the quality of work and the efficiency of the processing, a comprehensive quality assurance in every respect is crucial. For this reason, we are certified to ISO 9120 and ISO 9001. We see ourselves as a modern service company and provide lots of services. (Fixed lengths, pre-cut and other pre-processing / storage positions)

RK-tec Klostermeier Maschinenbau e. K.
stands for a company with highly qualified and motivated employees,
which know-how solutions for new and existing systems in the area
Machine / plant construction and conveyor technology supplies.

Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.

We're more than just a good team. We are visionaries.
There is one thing in particular behind success — people. On the one hand, this is a trained team that takes care of your wishes with the utmost commitment from A for offer to Z for subcontracting.
On the other hand, it is also our own family, which is involved with heart and soul. They in particular encouraged me in 2016 to set our course for the future and to found a new existence at the age of 25.

That's pretty brave? Also! But when courage meets vision, these are the perfect conditions for making a difference. Because I want to take on new challenges and thus change the metal industry. To use all my energy to set up a digital metal and cutting company that offers you the greatest possible flexibility with several locations.
Are you part of it? Then let's set off on a growth path together!

Welded constructions in single and series production.
Welding certificate DIN EN 1090-2 in connection with DIN EN 1090-1. Manufacture of steel structures up to EXC 3.
Pressure vessel construction
according to the Pressure Equipment Directive (2014/64 / EU) and AD 2000HP0.
Pipeline construction
Our specialty is welded constructions in single and series production, especially unwinding and piping.
Water jet cutting, rolling, milling, bending, plasma cutting, blasting, painting.