The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality.
Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

- Laser cutting of metal sheets and pipes
- Quality welding to DIN 18800-7 "B"
- Assemblies
- Bending and folding
- Punching, stamping and pressing parts
- Water jet cutting
- Laser marking
- Vibratory Finishing
- NEW + + + laser parts and folding up to 4 m in length

Services
For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers.
The surfaces we deal with experienced partners.

- Laser cutting
Steel: 25 mm thick in size 4000 mm x 2000 mm
VA: 25 mm thick in size 4000 mm x 2000 mm
Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm

- Laser marking
VA, aluminum and brass up to a size of 400 mm x 600 mm

- Water jet cutting
Virtually all materials in the format of 4000 mm x 2000 mm
Please queries whether the desired sheet thickness is available in stock.

- Bending and folding
Steel: 5 mm thickness and 4000 mm length
VA: 4 mm thickness and 4000 mm length

- Welding
All common welding processes such as MIG, MAG or TIG steel and VA

We are your competent partner in fluid technology with four locations in and outside Germany

- CNC long and short turned parts
- Vertical turning
- Assembly of final-tested mechanical components
- grinding (inside, outside, in the passage etc.)
- honing
- milling
- sandblasting
- hard machining



Complete machining on modern CNC machines (long and short turned parts, vertical turning)

- complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces

- All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined.



Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested.
The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

SLT Bauer intralogistics
Your vision, our solution: Tailored intralogistics and steel construction for every project
Your expert for tailor-made intralogistics solutions and steel construction projects that meet the highest standards in both the industrial and private sectors. Our company stands for quality, precision and reliability in every step of your project planning and implementation. With our comprehensive range of services, we are able to implement a wide range of individual solutions that make your processes more efficient and ensure greater safety.

Our range of services...
comprises a variety of offers that are tailored to a wide range of requirements. This includes our sturdy and safe railings & gates, which not only offer protection and safety, but also impress with their attractive design. With special load carriers, we offer you tailor-made transport and storage solutions that are developed to meet the specific requirements of your products. However, our commitment goes far beyond that — we also offer high-quality platforms to create additional space and greater efficiency in your work areas, as well as individually planned halls that are ideal for industrial use or for private projects.

Our steel structures are known for their durability, flexibility and exceptional load capacity. Whether you want to build a complex structure, a warehouse or another construction project — we are here to support you with comprehensive know-how. Our high-quality coatings also provide the necessary protection against external influences such as corrosion and weather to extend the life of your structures.

We process metal with heart and mind

The proof of market relatedness and continuity
Since its founding in 1924, we maintain a thriving collaboration with numerous commercial and industrial companies. The foundation for mutual success is our long-standing experience and expertise, our unrivaled performance and our legendary reliability.

Our market and services
We solve the specific tasks with all our knowledge and the latest tooling technology. We support our customers with passion through all phases of a project, however complex and convincing a perfect solution, as well as cost and schedule adherence.

As a supplier in the field of punching, bending, pressing, we are equipped with latest machines and measurement techniques. Our strengths lie mainly in the tool Falling production for sheet thicknesses from 0.4 to 4.0 mm. In addition to manufacturing these parts further post-processing are possible in our home; trovalizing / vibratory grinding, cleaning, powder coating, painting.

Our core competencies in sheet metal processing (stamping, bending, welding, assembly, etc.) are the result of many years of experience.
Specific duties of our customers require individual solutions. We support our customers knowledgeable about all phases of a project, ie from consulting to product delivery. Here convince our services both professionally and cost comparatively as well as scheduled. Contributing a modern tooling and powerful resources at critical.

Our competencies
Development and Planning
Toolmaking
Punching
Assembly
Welding
Powder coating

The medium-sized enterprises THIERBACH from Lower Hall near Heilbronn supplies
Companies from all industries as tailored solutions for the
Parts subject.

TURNING AND MILLING PARTS
THIERBACH processed according to your specifications, all machinable materials, including steel, stainless steel, brass, aluminum and bronze and precious metals and special materials for the aerospace industry.

SINTERFACE PARTS
For the production of sintered parts THIERBACH used exclusively powder with demonstrated high quality. Depending on requirements, the base material of various alloying elements are added.

Formed
In the area of formed THIERBACH offers various production options such as cold and hot extrusion. In addition, a mechanical, metal-cutting rework is possible.

PUNCHING AND BENDING PARTS
In the field of stamping and bending parts offers THIERBACH solutions of metallic and non-metallic materials that are manufactured on CNC machines.In addition, welding can
be performed.

LASER COMPONENTS
In the area of laser parts are available from THIERBACH steel, stainless steel or aluminum products with extremely high precision contours in different thicknesses.

CASTINGS
In THIERBACH you get castings in all major manufacturing processes: aluminum die-casting, aluminum sand casting, zinc die casting, copper sand castings or precision castings.

DEEP DRAWN PARTS
THIERBACH provides you with high quality deep drawn parts made of stainless steel, aluminum, brass, bronze, iron, chromium or copper, either as a single function template or as a large series.

ASSEMBLIES
Not just when you need a single part, but even with demanding assemblies, you can count on THIERBACH: in partnership, economic and logistical point of view.

CERTIFIED QUALITY
An important part of THIERBACH quality philosophy is the maximum quality assurance in the production of your parts and assemblies.

FACTS: QUALTÄTSSICHERUNG
- Certification according to DIN EN ISO 9001:2008
- Erstmusterprüfberichtenach VDA
- PPAP documentation
- IMDS entries
- Uniformity measurements
- Surface measurements
- Length measurements
- Measuring equipment management
- Sampling inspection according to AQL 1
- SPC tests

Possibilities of surface and heat treatments
Even when it comes ächen to the finishing of surfaces, THIERBACH provides organizational and economic advantages: Through partnerships with reputable companies you get:
- Modern production techniques
- Everything from prototype to mass production
- Different machining options and THIERBACH all the possible rework and surfaces.In this way long and expensive transport routes and the total cost per piece If omitted significantly reduced.

THIERBACH offers:
Galvanizing / / Copper
Passivation / / hard chrome plating
Burnishing / / Gilding
Dacromet / / Geomet coating
Cadmium / / Nickel
Chromate / / anodizing
Phosphating / / pickling / / Silver
Case hardening / / Inductive
Glow / / start / / Slot
Embossing / / Bending / / rubbing
Lapping / / honing / / punching
Engraving / / brushes
Polishing / / electropolishing
Grinding / / trowalizing
Sand and glass bead blasting


Flexible Logistics
THIERBACH is not content to create the correct part, but is only satisfied when you is this the right time and at the right place. Thus, for example, already taken in the packaging that it contains all the elements for a smooth production: Logo, number, barcode.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services.

For our national and international customers, we manufacture complex parts on the following presses:
- Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300)
- Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500),
- Fine blanking presses from 1,600 kN to 3,200 kN,
- Pressing machine to Dm 900 x 5 mm
- Press brakes up to 1,500 mm long

Materials / Materials:
Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals
such as aluminum, copper, bronze and brass, and substance capable plastics.
Sheet thickness: 0.05 mm - 10.0 mm
Coil: 300 mm x 10 mm and 1000 mm x 8 mm

Product Line / products:
Fastening systems for photovoltaic systems such as roof hooks, shielding,
Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves,
Contacts, discs, covers, clamps, braces, disc springs, angles and gears

Toolmaking
The following services offered by our professional expert toolmaking:
- Project development to series production
- Tool design
- Prototype production
- Construction of composite tools, drawing tools, stamping tools, bending tools,
Fine-cut and cutting tools as well as devices

Subsequent processing
- Vibratory grinding, brush deburring, drums, tape loops with automatic feed
- Heat treatment - all standard methods (inter-stage hardening, Nitriding,
Hardening, and Nitrocarburizinga)

Surface Finishing / Surface coating
- Powder coating, KTL, painting
- Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing)

Assembly production
As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly.
- Inert gas welding (TIG / MIG / MAG)
- Robot welding
- Stud Welding
- Spot and projection welding
- Pressure joining (Clinching / clinching)
- Riveting, caulking, gluing

Your competent partner for manufacturing mechanical products on CNC-controlled processing machines.

VETEC Zerspanungs- und Feinwerktechnik GmbH has been successfully manufacturing complex mechanical individual products and assemblies for over 30 years. The focus is on both single-part and prototype production as well as series production for small and medium-sized quantities according to your specifications. We see ourselves as an innovative manufacturing company for high-quality precision engineering.
A creative team of highly trained specialists, technicians and engineers enables the efficient implementation of individual manufacturing services with consistently high quality.
Our motivation, continuous modernization of our machinery and close cooperation with our customers are the basis of our corporate success.

performances
As a competent partner for CNC machining, our long-standing customers particularly appreciate the close cooperation in optimising their projects for production and comprehensive advice on the selection of possible materials and surface and material treatments. We can draw on over 20 years of experience here.
Our specialty is primarily high-precision and complex components. We have a lot of experience in processing a wide variety of materials.
With regard to technical requirements and project management, we respond flexibly to the wishes of our customers.
We work for a wide range of sectors of the economy. Our customer base includes companies from the automotive industry, medical technology, aerospace, the electrical industry, many companies with innovative products, research and development companies and much more.

We offer you the following services:
CNC turning
CNC milling
Customization development and construction during production
Assembly of components
Finishing according to our service profile (see brochure and website)

With over 50 years of experience, we are one of the most innovative and modern companies in the field of precision technology. We have achieved international series prices through automation and robotic assembly. Our ultra-modern machinery enables the production of custom-made products, prototypes as well as small, medium and large series. Well-known companies from the semiconductor, optics, medical and aviation industries already rely on our quality.

1TECOplast - We are manufacturing partners for semi-finished and finished parts of plastics precision elements in many sectors and areas of the industry. We handle your needs of technical plastics parts quite individually, based on drawings or samples, using CNC controlled production machines and CAD-CAM assistance.

1TECOplast - Backing is provided by lean and economical structures. Optimized manufacturing methods enable us to produce "prototypes, small batches and series in numbers of thousands". We supply the specialty products meeting the high measurable standards of quality and precision, flexibly, economically and with dependable precision. This is warranted by the expertise of our staff.

1TECOplast - We process all thermoplastic synthetics available on the market of semi-finished parts, such as PE, PP, PVC, PA, PSU, POM, PVDF, PEEK, PMMA, PTFE, plus all other high-performance plastics, as well as fibrous plastics in all cutting methods. We are absolutely familiar with the assembly of structural components, as well as the bonding, joining and welding of containers, modules and pipes.

1TECOplast - Our quality management is orientated at customer requirements and has been certified since the year 2000 according to the standard of DIN EN ISO 9001:2008. Our business policy is strictly following the customers' demands with regard to service, quality, competitiveness and customer satisfaction.

The first Wenz Mechanik GmbH specializes in CNC milling of precision parts for machine construction, medical and aerospace. The years of experience in the market of metal industry makes Wenz mechanics a good partner for milling operations with the highest quality.
Whether smallest precision parts or entire assemblies for mechanical engineering, complicated surgical instruments from the finest materials and components for the aerospace mechanics Wenz is your supplier.

We are your partner for the laser processing with a very fast reaction time and punctual delivery. The modern machinery ensures excellent quality.