HKR GmbH & Co. KG

The HKR GmbH & Co. KG is a subsidiary of Vaillant GmbH.

This medium-sized companies went on 01 January 2006 from the previous profit center heating at the location Roding forth. The reliable service manager of the parent company also acts as a competent partner and supplier for external customers of the heating industry, automotive engineering, and for the sanitary sector.

The 317 employees achieved a turnover of 52 million euros in fiscal 2007.

Core competence is the development and production of components, gas and water leading assemblies and turning and forgings for the heating industry and the assembly of modules. The products are manufactured with an annual capacity of 8,000 tons per year, mainly made of brass but also made of steel and aluminum.

WE PRODUCE SUCCESS!

Experience the precision and the success with the products of HKR.Put your project with confidence in our hands. We support all around - from design, through production to installation.

With over 40 years experience we can convince mainly in the following areas:
· Production and development of components
· Construction and installation of gas and water leading assemblies
· Turning and forging production for heating
· Assembly

Your success is accurately measurable with us!

WE QUALITY OF LIFE!

We take responsibility! But we live in an integrated quality management system, which we constantly improve and control. In the production test systems integrated and systematic and methodological measures guarantee us to produce the highest standard. Quality means for us to deal responsibly with natural resources. Environmental protection and safeguarding the future are critical components of our quality management.As our customer you are in working with us, especially one who: Complete security, they have made us the right choice!

Sustainable quality - piece by piece - sets us apart. For us, this also the appreciation and development of our employees. They turn us into what our customers expect from us, suppliers of living and quality of lived from production to assembly to delivery!

WE MAKE THE POTENTIAL TO LIFE!

Rigid routine is not us. We go off the front and living innovation through and through. Years of experience and the latest techniques to help us not to stop, but always think one step ahead for our customers.

Sophisticated programs and structured processes enable a consistent production chain. Right from the start, we can rule out this way many sources of error. A direct access of the employees involved in each project can be short-term changes at any time, allowing the use of different concepts.

We recognize your potential and develop together with you further. Experience completely new with HKR precision. We are your competent partner from the initial idea to the production stage!

We bring your ideas into shape — quickly, flexibly, of the highest quality
As a full-service provider in plastics processing, we support our customers from the initial idea to on-time
Delivery of the final product in top quality.
We see ourselves as a trustworthy partner who, in intensive dialogue with you, provides impetus during development and actively follows up
looking for intelligent solutions.
Thanks to our optimal manufacturing depth, we offer all production steps from a single source. This allows us to quickly complete your projects
and implement them cost-effectively. At the same time, with our dedicated and experienced team, we can even at short notice
React very flexibly to changes and adjustments.

We are a company with an average of 10 employees. In the area of turning and milling, we produce small to medium quantities and prototypes. Furthermore, we are active in special machine and fixture operates inclusive development and construction.

Every company works best when all employees are happy to do their job every day and with a great deal of commitment.
Just like ours: A well-rehearsed, down-to-earth team, an uncompromising approach to quality and the right mix of experience and youth.

We supply ready-to-install components, including the required surfaces and heat treatments, including Empb, CoC, CMM measurement protocols.

Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance.
We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery.

In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk.


Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery.

More about us can be found on our website: www.industriemontage.sk

The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele.

We want to contribute to the long term success of our clients and work in partnership and permanently with you.

Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality.

Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly.

Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action.

We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress.

Part Sprektrum:
- Housing, Housing
- Cover, cover
- Transmission cover
- Pump housing
- Display window
- Cover, aperture
- Gears, gear
- Box, container
- Hinge

Range of machines:
- Krauss Maffei
- Arburg
- Ergotech
- Negri Bossi
- Fehlmann
- Agie
- Charmilles

Technologies:
- Injection molding, injection molding, plastic injection molding
- Ultrasonic Welding, Ultrasonic
- Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen
- Insertion, insertion form
- Bonding, potting, bonding
- Coating, painting, electroplating
- Mold design, mold
- Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM

Range of materials:
- PEEK, Victrex
- PA, Ultramid
- PE
- PP
- PBT, Ultradur
- POM, Delrin, Hostaform
- PET
- PSU
- PPS, Fortron, Ryton
- PPO
- ABS, Cycolac
- PC
- PMMA
- LCP, Vectra
- PEI, Ultem
- P

Large-scale and mass production
— Bending, forming and dividing wires
— Bending, punching and forming sheet metal strips
— Assembly and assembly of various parts made of different materials

Inter Technic sro has developed in more than 5 years into a powerful company.
If you are interested, we work for you as an extended workbench or can help reduce overcapacity, then ask us.

In January 2015, our machinery was another new and powerful
5-axis simultaneous milling extended Hermle C42.

We have currently in another, new DMG CNC milling machine invested.
- Table load up to 2,000 kg
- Table size 1700 x 750 mm
- Travel X = 1450 mm, Y = 700 mm, Z = 550 mm
This machine is our production in addition to available from the KW22 / 15th

A robot welding system was installed. This brings us to weld able TIG and MAG.

We are very well set up for you to produce tools and jigs.

We are happy to customize items, zero series, production parts or assemble complete modules.

With two new wire EDM machines we can in 2-shift operation for you.

Our machinery has been almost entirely reinvested.

For quality assurance, is from March 2016 new Zeiss measuring machine available!
For programming we use two CAD CAM - Siemens NX Unigraphics, Version: 8.5 programming stations and enables us to offer services to the 3-D machining.


Another added advantage of unsrem companies:
All contacts at Inter Technic spoke German except Slovak, English.

For many well-known customers, JP-Industrieanlagen has been the
Partners for solutions. We are a national and international company in the field of special machine construction, automation technology and contract manufacturing. Everything from a single source and with the highest precision and reliability.
Our delivery portfolio:
• Contract manufacturing, parts to be machined according to drawings (build to print)
• Construction and construction of assembly aids, assembly devices and clamping devices,
• Construction of base frames, frames, consoles, turntables for robot cells
• Turning and milling in our own turning and milling centers
• Welded constructions for the highest demands
• Welded constructions for static and dynamic loads according to DIN EN 1090ff EXC 1...2 / ISO 3834, for black steel, stainless steel, aluminium.
• Large part processing
• Optical measurement and testing
• Construction
• Engineering
• System integration
• Assembly
• Services
Your advantages with us as your partner at your side:
From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions.
.• From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions.
• We offer you alternatives for cost-effective production/implementation of your production orders.
• We support you in reducing costs and adding value to your production.
• We also automate your manufacturing and assembly processes in the context of Industry 4.0
• We are a full-service provider and deliver everything from a single source, independent and flexible, not tied to a specific manufacturer.

SINCE 2009 ....

The company was founded in 2009 by Mrs. Bettina Landgraf-Kaiser, storage capacity today is about 3000 m² in three halls. As a leading warehouse distributors constantly about 100 cars and well-preserved machines of best brands offered.
State of the art warehouses with crane capacity up to 10 tons and forklift capacities up to 7 and highly trained staff are the benefits for potential customers to find the "perfect machine". Complete "all-inclusive" packages (eg transport, introduction, installation Complete training) are developed and implemented according to your.

MEMBER OF:
Since 2009 FDM - Germany
Since 2009 EAMTM - Brussels (International)

SPECIALITY: Cutting metal-working machines
Our specialty is the trade used machines from metal cutting. Whether conventional or CNC - controlled, we each offer the right machine for you.In CNC - area we act almost exclusively with the control type Fanuc & Heidenhain. Here we can give you the best - provide service, whether coverage with qualified staff, service staff or software solutions.

OTHER:
Furthermore, even spare parts - remakes produced directly in the house with us. Through years of experience of our employees in the cutting process on Fanuc & Heidenhain controls, we can therefore offer cost effective replacement parts alternatives you.

Dear Ladies and Gentlemen,

in this way we would like our service companies introducing
we produce single pieces or small series, series, sub-assemblies, gauges, fixtures
Tools, special machine parts for the Varied fields of application according to your
Requirements, specifications, drawings. We can at reference customers from eg mechanical engineering, special engineering, medical, aircraft, automotive industry, tooling, etc.
References. Our range of machines includes most modern technology currently available in these areas
CNC milling, CNC turning, CNC surface grinding, CNC wire EDM, CNC sinker EDM CNC-Erodierbohren/Präzisionsbohrungen, CNC Ultra Sonic is offering.
Thanks to this modern manufacturing equipment and years of experience and a team of employees profounded
we are to be able almost all requirements in manufacturing technology needs.

For more information about our machine park can be found on our website

CNC milling, CNC turning, CNC surface grinding, CNC wire EDM, CNC sinker EDM CNC-Erodierbohren/Präzisionsbohrungen, CNC Ultrasonic

www.KaPe-erodiertechnik.de

KOVO Letovice, s.r.o. was founded in 2003, in order to continue the business activities of its owners since 1996.

We are flexible company able to support you with quality supplies concerning machining (especially from special hardly machined materials such as inconel etc.).

Fields of supplies:
- metal machining – steel, stainless steel, aluminium, other metals and plastics in small and medium-size batches
- lathing, milling on standard, NC and CNC machines, drilling, grinding, and welding of metals
- production of drawings in 2D and 3D format

About us

Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs.

You can find further details about us and our philosophy on our website.

Products

We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire.

We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions.

We offer

+ Qualitycertficate DIN ISO 9001:2008
+ in-house specified tool construction
+ in-house machinery construction
+ quick production of samples
+ technical and experienced know how
+ skilled telephone service
+ large production spectrum

Materials

Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request.

We manufacture bent wire components for you in all variants and materials.

Here a selection of the materials used:
+ Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths
+ Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D
+ Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm
+ Crapal wire
+ Becrosi valve spring wire
+ Silver and Palladium wire

UNCOMPROMISING QUALITY.

We see the exceptional demands of our customers for the quality of our products and services as a standard by which we can be measured every day. A specially developed quality management system ensures the premium precision of our products at all stages of processing. Whether turning, milling, drilling, grinding, assembling — we guarantee our customers uncompromising top performance, functional reliability and high efficiency in the value chain of their end products.

Lav.in
Lav.in is one of the most structured metal structures in its field (currently it has more than 140 employees and insists on a covered area of over 13,000 square meters, with the possibility of making a warehouse);
It is well equipped. Inside, in addition to 4 laser cuts, 1 punching machine, 16 bending machines, 3 calenders, separate welding departments between stainless steel and ferrous materials with 12 workstations, department with assembly line, satin finishing department
and polishing, there are also 1 combined laser cutting-punching machine,
2 fiber laser cutting (cheaper up to 50% compared to traditional cuts
laser), 1 automatic panel bender, 1 semi-automatic and 1
automatic 4-roll cnc calender. We supply the product including surface treatments. In addition, we have 2 trucks and 2 vans to make deliveries and optimize them
times. Our production is mainly oriented to the realization of pre-assembled and assembled for the sectors: naval, furnishing, professional, medical and stoves. Furthermore, we make kitchen hoods and professional ovens;
Lav.in is very flexible and reactive both in estimating and in production, guaranteeing very quick deliveries: it is very competitive in terms of prices, thanks also to a photovoltaic system of over 600 kW of power with which Lav.inè is self-sufficient from the point of energy view;
Lav.in is certified ISO 9001: 2015;
It is OHSAS 18000 certified.

We, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH in Sandhausen, are a family business that has specialized in the repair of electric motors since the company was founded in 1989. Since 2012 we have also covered the area of CNC production technology and are therefore able to manufacture spare parts ourselves and to respond to the individual needs of our customers in the best possible way.

In order to be well prepared for the future, we have invested a lot: In 2014, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH moved to a new, larger hall in Sandhausen on Gottlieb-Daimler-Strasse.

Today, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH is a specialist in the repair of servo drive technology. Thanks to many years of experience and constant further training measures, our currently 14 employees have extensive knowledge and can therefore help you competently and as quickly as possible at any time.

Stands for quality, precision and custom products and considers itself a service provider.

From the initial contact through to the finished product
We are your competent contact for:

• Advice
• Formulation of the concept
• Design

• Manufacture of the components

...sawing, turning, milling, hardening, heat treatment, surface and circular
...grinding, co-ordinate grinding, hard turning, 5-axis milling, HSC milling,
...eroding, laser cutting, water jet cutting, verified welding, surface treatment
...(bronzing, anodising, hard-coding, silver-plating, gold-plating, chemically
...nickel-plating)

• Polishing, coating
• Provision of outsourced parts:
...Electrical parts, standard parts, guide components, pneumatic parts and
...hydraulic parts
• Installation work
• Adjustment works
• Test runs
• Delivery with company vehicle or freight company and courier services.

We are a medium-sized company in the field of metal processing. Our core competencies include the production of series parts and assemblies for industry and plant and mechanical engineering, in particular the food and beverage industry.

For over 75 years, Lungmetall OHG has stood for efficiency, flexibility and competence in steel, stainless steel and aluminum. Whether individual or series production, with our modern machine park tailored to the requirements of our customers, we manufacture for you flexibly, inexpensively and quickly. We are lean enough to flexibly implement your ideas and wishes, but also large enough to provide you with the capacity you need, even for large series.

Thanks to our high level of vertical integration, we appear on the market as a system supplier, as we are not dependent on other trades. This manifests itself in short delivery times and a high quality standard.

With our currently 60 employees and our in-house design office, we offer you an extensive service portfolio and reliable processing of your orders!

We would be happy to win you as a valued customer and assure you of a partnership and team-oriented cooperation.

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures.
You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse.
There you will find our experienced team of 65 employees.

We offer the following services:
Tool and Mould
Contract manufacturing in the areas of CNC milling (3/5 axis) and turning

 Product Development
 Prototyping
 2D/3D - Construction
 Tools and forms
 injection molds
 Punching tools and devices
 Individual production according to customer specification
 Special purpose machines
 machinery and equipment including construction
 Installation and commissioning on site

We are a company that has been the right partner for 14 years now when it comes to prototypes, tools and devices for the mobile sector.
General contract manufacturing in the areas of HSC machining, mold making and model making complete our offering.