Find specialized suppliers for automatic turning on Techpilot. Our platform offers access to suppliers who manufacture precise and complex turned parts in series production. Benefit from comprehensive market transparency and optimize your supplier selection.
Viglienghi Srl has been synonym for excellence in manufacturing mechanical precision turned components for more than forty years.
Founded in 1970 in Esino Lario, today the company employs the most modern technologies for mechanical processing of INOX steels and superalloys, as well as of brass, aluminium and plastic materials.
In 1991, after completing the construction of a modern industrial factory having a covered space of 600 m2, the operative unit is moved to Via dell’Artigianato 3, still in Esino Lario, with its six employees and its machinery wholly converted to CNC technology.
In 2002 the factory is enlarged by acquiring the adjacent factory, and reaches a covered space of 1000 m2. In the same year ISO 9001 quality certification is achieved.
In 2004 the founder partners retire definitively and the company management is taken over by their son Giovanni Viglienghi, current majority partner, who had already joined the company in 2002, and their daughter, Cristina Viglienghi.
A new expansion phase begins, labour force totals 15 employees with a clearer differentiation of company functions, the machinery is renewed and enhanced, the company opens to foreign markets, EU and Extra-EU.
In 2014 the company is transformed from a partnership into a limited liability company and the works for building new administrative premises and redefining internal spaces are started.
Today the company has 25 employees and is extended over a 2000 m2 area of which 1400 m2 are covered: 1100 for manufacturing, 200 for raw material storage and 100 as administrative offices.
Viglienghi Technologies
Our many years of experience in mechanical processing (turning, milling, broaching, tapping, cutting, etc…) of INOX steels (AISI 303, 304, 316, 316Ti, 431, 630-17 4 Ph) and of super-alloys, as well as of brass, aluminium and plastic materials, supported by the best technologies, by an accurate selection of the best raw materials, by continuous controls throughout the processing phases, enable us to attain a high level of precision in the products with which we have achieved a consolidated appreciation from the market.
FEASIBILITY ANALYSIS
We ensure our customers are provided with a consulting service deriving from the vast experience accrued in this mechanical sector.
PRODUCTION
We have 7 CNC fixed head lathes, bar passage from dia. 5 mm to dia. 60 mm, which enable to work simultaneously with 2 tools reducing cycle times; 7 CNC sliding headstock lathes, bar passage from dia. 1,5 mm to dia. 40 mm, with motorized tools for manufacturing complex and small-size particulars; 3 CNC multi-spindle lathes bar passage from dia. 8 mm to dia. 40 mm: 3 turret lathes with gantry loader for finishings bar passage up to 200 mm; 2 four-axis vertical machining centres; 1 fillet rolling machine.
Furthermore, our range includes various turret milling machines, assembly machines, metal parts washing devices, mass metal finishing and polishing systems (sandblasters and tumbling machines).
Our manufacturing batches range from 100 to 500,000 pieces, and, on demand, we perform samplings and pre-series.
QUALITY INSPECTION
Precision is our strength. All our products rigorously undergo controls (optical, contact friction, SPC, …) and are accompanied by a conformity certificate.
For every first shipment we perform a measurement certificate and, in some cases, we also work in FREE PASS MODALITY.
Warehouse
We are structured for stipulating framework agreements to manage a warehouse.
Founded
1970
Employees
20 - 50
Certifications
Esino Lario
Italy - 23825
Founded
Employees
Certifications
samobor
Croatia - 10430
Founded
Employees
200 - 500
Certifications
Zielona Gora
Poland - 65-022
In modern CNC lathes all machinable materials can
• from Ø 0.50 mm to a diameter of 5.00 mm from the coil
• from Ø 3.00 mm to Ø 50.00 mm from the rod
be processed. Profiles such as 4-or 6-kant kant also are not a problem we have lathes and short lathes in use. We can produce your turned parts and nuts from the following materials:
• stainless steels such as 1.4104, 1.4301, 1.4305, 1.4307, 1.4404 ... etc.
• higher alloyed materials such as titanium, Hastelloy and Inconel
• heat-resistant materials, such as 1.4828 and 1.4841 ... etc.
• Brass and free-cutting steels
In the area of milling, we are also able to handle all common materials. Because of our machinery, we manufacture from pattern over small and medium series up to mass production. Here we can also count on machines with 4 and 5 Axis recourse.
All parts are cleaned in our Dürr wash and are generally delivered free of grease.
We are able to polish all geometries for you and are in the range of grinding and polishing of surfaces on the cutting edge of technology. We have this several machines.
We also work very closely with a neighboring electroplating together and can therefore offer you all the surface treatments, such as nickel plating, chrome plating, zinc plating, passivate, etc. .....
We specialize in housing sleeves and flat 6Kt. nuts made of stainless steel and brass for proximity switch and sensor technology. We manufacture the sleeves according to standard stainless steel 1.4305 and 1.4571 as well as brass in the dimensions
• M 5 x 0.5
• M 8 x 1
• M 12 x 1
• M 14 x 1
• M 18 x 1
• M 30 x 1.5
• M 32 x 1.5
Of course, sleeves and corresponding nuts with tank thread (PG) are no problem for us. Similarly, the corresponding accessories such as plug or adapter sleeves belong to our production program.
We supply the main dimensions with rolled thread, so that the sleeves have a perfect look. In addition, the threads have a greater strength and are thus not as sensitive. For other dimensions, such as M 30 x 1.5, M 32 x 1.5 or PG threads are chased the threads.
The corresponding flat 6KT -. Nuts
• M 5 x 0.5 x 2.5 mm or SW 7 SW 8 x 2.7 mm
• M 8 x 1 SW 13 x 4 mm
• M 12 x 1 17 mm x 4 mm
• M 18 x 1 size 24 x 4 mm
• M 30 x 1.5 36 mm x 5 mm
• M 32 x 1.5 size 41 x 5 mm
We mainly stock.
In principle, we produce all the sleeves as well as turning and milling parts customized according to drawing, but can miteinbringen wish our suggestions and ideas.
Founded
1979
Employees
Certifications
Wehingen
Germany - 78564
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
We are pleased that you have noticed us.
We are a young, modern and motivated team,
which specializes in the manufacture of precision turned parts.
High product quality, short response times and adherence to delivery dates are among our strengths.
Request a non-binding offer from us and let our quality convince you.
Founded
2018
Employees
< 5
Certifications
Unterreichenbach
Germany - 75399
Founded
2015
Employees
5 - 10
Certifications
Blagoevgrad
Bulgaria - 2700
VIOSON PRODCOMIMPEX was established in 1996, as a joint-stock company with the headquarters in Braşov, Romania
SC VIOSON PRODCOMIMPEX SRL has the metal manufacturing as main object of activity and is structured in the following compartments listed hereafter.
Metal workshop
Provided with:
• Semi-automatic band saw
• Guillotine press for sawing bars and profiles of various dimensions (max. 40 mm)
• MIG-MAG welding machine, latest German Larch generation.
Splinting processing workshop
Provided with:
• numerically controlled milling machines with a cutting stroke of 800 mm
• numerically controlled lathes with a maximum capacity of ø140
• universal machine tools
Among the products developed, we name:
- sealing labyrinth systems and Nilos sealing ring systems, for the entire range of roller conveyors used in coal transportation;
- mechanically manufacturing of spring leafs, central screws and plate spacers for IVECO and MAN trucks;
- Fixing elements for parts used in the Austrian and German Railways ;
- Spare parts for technological equipment (ex. : clamping jaws for bull-block machines) ;
- Equipment upgrading elements (ex. : friction cone coupling for precious metal mill) ;
- dies and moulds of average complexity ;
- Packaging line (Roller Conveyor + Belt Conveyor) ;here we are responsible both for the design and for the execution of the packaging line ;
- specific pallets for textile spools transportation ;
- Aluminum castings;
- Excavator buckets repair;
- Grab buckets ;
- checking tables, spacers, engine flanges, reels , containers, callipers, check rings, jaws
- various aluminum parts machining,
Design workshops
Our engineers are working in CATIA and ACAD.
Based on design themes we can carry out product drawings and products’ work drawings.
We are open to collaboration in the profile described.
Founded
1996
Employees
20 - 50
Certifications
Brasov
Romania - 500419
VIPACO Industries GmbH - From the request to the realization of your project, you will receive competent and holistic advice and support. We do not just sell mechanical finished parts, we offer optimal solutions!
VIPACO, your machining partner, produces mechanical parts for pumps, gearboxes, cardan shafts, fittings, hydraulic fittings, commercial vehicles and many other turned parts for engineering and supply industries.
Founded
Employees
Certifications
Lippstadt
Germany - 59557
Founded
Employees
10 - 20
Certifications
Plovdiv
Bulgaria - 4000
Founded
Employees
10 - 20
Certifications
Plovdiv
Bulgaria - 4000
Supplier for TAPTITE, REMFORM, PT, drawing parts and misc. fastener, supplier for turning parts and cold forming parts to very good prices, high quality, and technical support.
Founded
2009
Employees
500 - 1000
Certifications
Langenau/Albeck
Germany - 89129
Vision Tech is a leading Dutch supplier of (fine) mechanical parts. Besides our workshop and logistics center in Schijndel we have a location in the Czech Republic (Bohemia Vision Tech) and a large network in Eastern Europe. This allows us to produce in the Netherlands and abroad with the great advantage that we can keep costs low.
Founded
Employees
20 - 50
Certifications
Netherlands - 5482TM
Company „Vitalii & Son“ has been developing and producing stretch moulds for PET bottles and containers even since this technology first took off in 1988 in Bulgaria.
With our many years of experience, we guarantee the optimum design and contruction of the blow moulds to give you the best possible bottle quality. We have detailed knowledge of all the different types of machines. Thanks to our own manufacturing technologies, and especially our high end generation machines, we achieve the shortest possible lead times. In our well-equipped blowing laboratory, a wide range of tests and inspections can be performed before the start of production. Leading bottle makers value our competence and make regular use of our services.
We concentrate our knowledge on the classic decision, we refuse to make the quick-change mould because we deeply believe that the life of this type of the moulds are short.
We never forget about people who install the moulds.
Large Moulds
Our know-how extends up to “containers” with a content of 5, 10, 12, litres and even 5 gallons in a wide variety of shapes.
Our design department is familiar with the special features of these large containers and the possibilities of production on the various types of blowing machines. Comprehensive advice for such projects is available to you at any time.
Hot-Fill Blow Moulds
We have already produced a large number of steel moulds for the hot-fill technology.
Through the development of own manufacturing technologies, we reach smooth surfaces. We cut the manufacturing costs for those moulds considerably and in the same time reduce the weight of the moulds.
Founded
1991
Employees
20 - 50
Certifications
city Varna
Bulgaria - 9009
VITART is a company specialized in manufacturing high precision metal components on demand by mechanical machining.
Each internal process is constantly optimized to ensure quality to the final customer efficiency and competitiveness.
The VITART look is strongly oriented towards the continuous improvement of company KPIs for the benefit of customer service.
Founded in 1966, VITART is a company specialized in manufacturing high precision metal components on demand by mechanical machining.
Thanks to the great versatility and experience, VITART carries out mechanical machining and assembly, and produces high precision metal components, even with complex geometry, in stainless steels, special steels, brass and copper alloys and aluminum alloys for any business field.
The company philosophy aims at a continuous technological progress and business culture development to offer an organization able to provide an increasingly complete range of services to customers, including positioned packaging, 100% automatic sorting, stock management.
Founded
Employees
20 - 50
Certifications
Treviglio (Bergamo)
Italy - 24047
The VIT BUL S.R.L., is an automatic turnery, for over fifty years, established itself in the production of high-precision metal parts.
Based on our customers’ projects and samples, VIT BUL S.R.L. is able to reproduce faithfully any precision turned item, working from 3 mm to 60 mm diameter.
Upon request, we realize sampling of articles, and our technical office studies the best project in order to guarantee the lowest cost and highest functionality. We manage orders from 300/400 pieces to 50.000 pieces. Our current machinery inventory, composed by single spindle CNC and CAMMES, allows us to use every type of ferrous and non-ferrous material:
AVP (11SMnpb37)
PR80 (36SMnPb14)
BRASS
ALUMINUM
C40/45
AISI 303 / 304 / 316 / 430
COPPER
NYLON
DERLIN
Besides our ordinary turning production, we offer also: rest-machining, boring, cutting, grinding, and assembling.
We realize an accurate control on items thank to specific optical instruments in order to verify the total lack of flaws and imperfections.
At the end, we deal with the cleansing of dirty and deoiled pieces, in order to avoid residuals.
This way, we are able to provide flawless, degreased, clean items in compliance with pollution standards. We realize also personalized assembly according to our customers’ needs, in order to deliver a ready-to-use item.
UNI EN ISO 9001:2008
Certified partners and certified process flows and productive processes allow us to provide our customers high quality items, certified quality system
UNI EN ISO 9001:2008. ISO 9001:2008 certification determines a series of procedures that a company must follow during the productive processes and during services supplies. Follow a quality certification allow us to correctly plan every production, to program spot checks in details, and to monitor the productive process from the beginning to the end. At the end of the process flow, we make accurate tolerance tests through the compilation of technical reports. This way, we are able to guarantee control and the perfect item realization.
Our machine allows us to work from a minimum diameter of 3 mm up to a maximum of 65 mm diameter.
TURNING DEPARTMENT CNC
CNC GILDEMEISTER SPRINT 42 LINEAR maximum bar passage Ø42
CNC GILDEMEISTER SPRINT 42 LINEAR maximum bar passage Ø42
CNC GILDEMEISTER SPRINT 32 LINEAR maximum bar passage Ø32
CNC GILDEMEISTER SPRINT 20 LINEAR maximum bar passage Ø20
CNC GILDEMEISTER GD20 maximum bar passage Ø20
CNC GILDEMEISTER GD20 maximum bar passage Ø20
CNC GILDEMEISTER SPEED 12-7 LINEAR maximum bar passage Ø12
CNC BIGLIA B301B maximum bar passage Ø40
CNC BIGLIA B465Y2 maximum bar passage Ø65
TURNING DEPARTMENT CAMMES
TORNOS R10 maximum bar passage Ø10
TORNOS R12 maximum bar passage Ø12
TORNOS R12 maximum bar passage Ø12
TORNOS R12 maximum bar passage Ø12
TORNOS R16 maximum bar passage Ø16
TORNOS R28 maximum bar passage Ø28
INDEX B60 maximum bar passage Ø60
TRAUB 25 maximum bar passage Ø25
Thanks to the cooperation with selected suppliers with UNI EN ISO 90001 and ISO 1400, VIT BUL SRL can produce items, according to the clients’ specifications, with any kind of grinding, thermal and surface treatment, such as:
Galvanization ( white, black, yellow )
Zinc-Nickel plating,
Nickel plating ( glossy matt )
Tinning
Copper Plating
Brass plating
Chrome plating
Sealing
Dehydrogenation
Burnishing
Dacromet
Phosphating
Anodizing
Carbonitriding
Cementation
Quenching
Hardening
Founded
1960
Employees
10 - 20
Certifications
Osimo Stazione
Italy - 60027
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Experienced (since 2002) subcontractor using the CNC method of metal parts through turning and milling
Founded
2024
Employees
< 5
Certifications
Chorzów
Poland - 41503
Founded
2018
Employees
< 5
Certifications
Donja Zelina
Croatia - 10382
Founded
Employees
Certifications
Lviv
Ukraine - 79000
Founded
1985
Employees
5 - 10
Certifications
Großostheim
Germany - 63762
V-Mecc works for all sectors that require a high level of customisation and precision.
Thanks to our capacity and the competences of our team, we are able to offer high efficiency and quality at competitive prices.
Our CNC machines offer the best results for prototyping, functional and assembly tests, fixing masks and devices and functional components for the final customer.
Founded
2018
Employees
5 - 10
Certifications
Massanzago
Italy - 35010
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
