In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches.



Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger.



In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall.



The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern.



In 2000, the certification according to DIN EN ISO 9002 was carried out.



As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the



Hohenlohe precision parts GmbH.



Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners.



The reward for good quality and very little complaints are our satisfied customers.

Individual, small series and custom-made stainless steel turned parts
We have modern machinery at our disposal for individual, small series and special production of stainless steel turned parts in diameter ranges from 5 to 1400 mm.

CNC lathes
2x turning diameter 550 mm x 1500 mm turning length
1x turning diameter 650 mm x 1500 mm turning length
1x turning diameter 830 mm x 1500 mm turning length
1x turning diameter 1450 mm x 1700 mm turning length
CNC vertical machining centers
1x 1100mm x 650mm x 600mm
1x 1600mm x 850mm x 700mm
Conventional lathes
1x turning diameter 670 mm
1x turning diameter 1000 mm
Benefit from our high quality standard through modern machinery. Adherence to deadlines and speed are a matter of course for us.
Do you have any questions?
We are always at your disposal for further information.

The company "Horjak-PRECISE" Domžale doo was founded in 1990, but the beginnings date back to 1957.

Very soon after the foundation was started to establish direct links with European companies. For this the CNC machining and machining products are manufactured according to the drawing in the field.

Mainly working Horjak-Precise DOO Domzale for companies from Europe, the focus is on Austria, Germany, the Netherlands, Hungary, Spain, Poland and the UK.

The production range includes the production of

-Precision metal parts for brake systems, rail and road vehicles
-Various rollers and shafts for printing machines
-Precision-engineered metal products for the optics
-Various machine components for other industrial sectors

Mainly are the strengths in the manufacture of turned and milled parts in small and medium series. All products are subjected to both intermediate and final inspections, strictly according to the ISO 9001 specifications

Since March 2006, the company is angesidelt in a new production hall on 6000 square meters and has about 80-100 employees. It is working with about 30 different partners.

Our motto is: "We strive for perfection."

We Henkel-Metallwaren are a company established in 1990 and modern equipped
CNC production.
We guarantee flexibility and punctuality with high quality.
At www.henkel-metallwaren.de you can get an overview of our company and machinery.

We have been manufacturing high-quality precision parts, cable assemblies, stamping and pressing of plastic since 1990

Materials: steel, stainless steel, aluminum, brass, bronze, copper, plastics

Flexibility and reliability form the basis of our actions.

We are a company with an average of 10 employees. In the area of turning and milling, we produce small to medium quantities and prototypes. Furthermore, we are active in special machine and fixture operates inclusive development and construction.

Four successful supplier companies whose core competency precision turning. The Hutzel DrehTech GmbH in Steinenbronn / Böblingen, the Hutzel Seidewitztal GmbH Liebherr City / Dresden, the Hutz-EL sro in Klasterec nO / Czech Republic, as well as
HandlingTech Automations-Systeme GmbH in Möhringen / Stuttgart.



Turned parts of 1-200 mm in diameter up to 1000 mm in length are made from all machinable materials by drawing from prototype to series. Even the most modern materials from the aerospace industry to be processed, even titanium, tantalum and zirconium



Robots, handling solutions and concepts for site security through production
rationalization offers the HandlingTech Automations-Systeme GmbH (www.handlingtech.de).

Hutzel-Seidewitztal GmbH is part of the HutzelTechnics group of companies.
The Precision division of the HutzelTechnics group of companies realizes innovative solutions for precision parts worldwide at its Liebstadt / Saxony and Klasterec plants in the Czech Republic.

Ideal production is a production company based in Balingen and Serbia.

Our service for you:
> Machining (Turning & Milling)
> Production according to drawing
> Deburring work
> Connection technology
> Mounting

Our products:
> Hydraulic components
> Hose technology
> Pipe bending technology
> Specific & Classic C-Parts
> Connection elements
> Valves

Imar is a company in the metalworking sector that believes and invests in people and relationships.
Our Vision:
We want Imar to become a perfect model of sustainability in all fields. We want to help create a better world where products are created with the minimum waste of resources and at the same time with maximum quality.
We aim to free man's time from all non-creative activities.

Our Mission:
We create maximum value for the customer by taking the responsibility of serving them with punctuality and quality.
In carrying out our service we analyze waste to continuously improve the process by automating and digitizing all repetitive work.

Our Values:
Responsibility, Growth and Competence, Respect and Loyalty;
these are the values that determine Imar's way of doing business. We require and promote respect for our Values, with the aim of consolidating our relationship of trust with all Stakeholders: collaborators, customers, suppliers, partners, local communities.
We combine the principles of economic management with those of respect for the person and the environment in which we operate, for the sustainable development of the company, within a path of constant growth and responsibility.

We continue to invest in technology and know-how to provide an increasingly better service to all our stakeholders.
The strengths are:
Flexibility, Technical skills, Speed, Complete metal processing service

We have specialized in the production of individual parts and small to medium series in a wide variety of areas.



No matter whether small or large companies, we manufacture according to plans and wishes of our customers and deliver versatile products with maximum precision and flexibility. Current controls and programming systems characterize our know-how.

Independent is a machine tool manufacturer with a focus on a high level of integration. Servo and asynchronous motor drivers are also available, which cover the entire field of high-frequency drives up to the 100 kW range.

When it comes to manufacturing, Independendend's strength lies in the processing of hardened high-performance tool steels. The unusual main focus means that development support, advice and the production of complex parts can be offered from a single source.

Every company works best when all employees are happy to do their job every day and with a great deal of commitment.
Just like ours: A well-rehearsed, down-to-earth team, an uncompromising approach to quality and the right mix of experience and youth.

We supply ready-to-install components, including the required surfaces and heat treatments, including Empb, CoC, CMM measurement protocols.

Industrial Supply Sourcing GmbH is the German SALES and SERVICE COMPANY of Hiteco, an Asian supplier that supplies top customers worldwide. Hiteco Ltd. is a private Chinese company with more than 20 employees (four of them German speakers), headquartered in Shanghai (China). Since it was founded in 2004, Hiteco has primarily been supplying drawing parts such as
1. Turned parts
2. Pneumatic cylinder
3. Castings (various processes and materials)
4. Injection molded parts (including WKZ mold construction)
5. Stamped and forged parts
to Germany, Europe and the USA. A smaller Hiteco office in North China also deals with wire mesh, perforated sheet metal and building materials.

Hiteco is also active in the area of quality and supplier management, ie Hiteco looks after and manages the supplier base in Greater China on behalf of European companies (as an external workbench, so to speak). This includes services such as
1. the quality control before shipment
2. Monitoring supplier performance including supplier development programs in "Greater China",
3. or the search and qualification of new suppliers in China (e.g. for localization projects).

İNOKS DEMİR SAN.VE TİC.LTD.ŞTİ. has been serving in the metal industry for 12 years. Our organization is known for excellent work, constant communication and an emphasis on customer service. Here are some details for you to get to know İNOKS DEMİR better:

Founding and History
İNOKS DEMİR was founded in 2012. Since our establishment, we have successfully completed numerous projects and become a major player in the industry. We pride ourselves on our history, quality and expertise.

Mission and Vision
Our mission is to provide services at the highest level accessible and to promote excellence in projects. Our vision is to be a company that is fast, continuous, proactive, open to change and also specified.

Products and Services
İNOKS DEMİR offers a wide range of products. These products include:
• Furniture decoration (coffee table, table, dresser, bookcase, separator, mirror, songs),
• Store equipment,
• Hotel decoration products projects,
• Sheet metal laser cutting, press brake bending and static powder coating works
There are. In addition, we adapt all parts such as laser, cutting, bending and painting in-house and achieve successful works.

Customer Experience and Satisfaction
Customer satisfaction is one of the visibility of İNOKS DEMİR. We work closely with partners and strive to complete their projects on time and on budget. Positive feedback from them is the greatest motivation for us.

Why Us?
INOKS DEMİR has many parts from its competitors. Here's why you choose us:
We are an experienced and expert team.
We are committed to perfect processing and high quality.
We always put the customer first.
We offer competitive prices.
İNOKS DEMİR is a reliable partner for your projects. With us, you can find the expertise and quality you need to sustain your projects and bring them to life. Contact us for more information and find out how we can help ensure the success of your project.
İNOKS DEMİR – Serving you will make us happy"

The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele.

We want to contribute to the long term success of our clients and work in partnership and permanently with you.

Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality.

Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly.

Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action.

We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress.

Part Sprektrum:
- Housing, Housing
- Cover, cover
- Transmission cover
- Pump housing
- Display window
- Cover, aperture
- Gears, gear
- Box, container
- Hinge

Range of machines:
- Krauss Maffei
- Arburg
- Ergotech
- Negri Bossi
- Fehlmann
- Agie
- Charmilles

Technologies:
- Injection molding, injection molding, plastic injection molding
- Ultrasonic Welding, Ultrasonic
- Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen
- Insertion, insertion form
- Bonding, potting, bonding
- Coating, painting, electroplating
- Mold design, mold
- Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM

Range of materials:
- PEEK, Victrex
- PA, Ultramid
- PE
- PP
- PBT, Ultradur
- POM, Delrin, Hostaform
- PET
- PSU
- PPS, Fortron, Ryton
- PPO
- ABS, Cycolac
- PC
- PMMA
- LCP, Vectra
- PEI, Ultem
- P

As a Swiss company in the field of precision CNC milling and turning, we offer turned and milled parts of the highest quality, always on time and at competitive prices. You will never look for other CNC service providers again!

iswo metall gbr is an owner-managed, medium-sized metal processing company based in Lower Franconia.
Since our company was founded by Almir Islamcevic and Ute Wolf in 2007, we have been welding and turning, especially in the areas of machine and plant engineering.
Development and continuity are at the heart of our work.
Since its founding, iswo metall has relied on a well-coordinated team, short distances between the different areas in the company, and quality guaranteed by the owner-managed structure.
Our employees are specialized and in constant contact with management active in production and administration, which ensures quality and guarantees flexibility.

Iswo Metall Gbr
Main road 144
97904 Dorfprozelten
www.iswo-metall.de
info@iswo-metall.de

IV Metall is an owner-managed, independent company.

The location in Nachrodt-Wiblingwerde in Sauerland characterizes a traditional, regionally producing but also a modern, globally operating company. Our benchmark is the market with its requirements

The main area of responsibility lies in the design and manufacture as well as in the trade of technical springs of all types.

From layout and calculation, to sample delivery and series, including all the documents required by the customer, delivered in the packaging you require. We earn the trust of our customers through the quality delivered and the service provided.

This gives us the chance to win new markets.

Traditional values determine the behavior of management and employees.

Mutual trust, fairness, respect, reliability, honesty and personal responsibility are company philosophy and lived reality. We are aware of our responsibility and obligation to our employees, business partners and market participants and aim to continuously develop the company, to maintain the company's innovative strength and to ensure the social security of our employees.

The result of our good work should not be defined solely by the increase in growth and prosperity, but we also want to burden our environment as little as possible and be socially committed.