Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts.

In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure.

The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were.


Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality.

This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels.

Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time.


Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts.

Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line.

Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons,

Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons.


Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating).

Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Welcome to K + F Metalltechnik GmbH & Co. KG

— K+F products are tested in accordance with EC guidelines, national and international standards
— For over 30 years, we have been manufacturing quality products in our production facilities, which are designed according to the latest production guidelines
— Every employee sees himself as part of the system and is constantly working on its optimization
— Pioneering innovations and investments mean progress
— This is the only way we can achieve a high standard of quality that ensures the full satisfaction of our customers

Since 1969, we have been your reliable partner for CNC machining services. With a team of 20 employees, we offer high-precision turning and milling work for various industries.

Our focus is on quality and customer satisfaction. Contact us to find out how we can meet your manufacturing needs.

We are a small company in the heart of the Rhön our specialty is the production of waves of all kinds of diameter 12-360mm and a length up to 1590mm, turned parts up to diameter 450mm, external cylindrical grinding from 10 to 350mm and a length up to 1600mm at a max. Workpiece weight of 500kg. Single and series production

Materials:
We process steel, stainless steel and cast iron and aluminum

Delivery program:
Shafts, pistons, bushings, rings, discs, shafts, pulleys, housings, hubs, coupling flanges, spindles, drive shafts, shaft, pistons, jack, wheel, axle, pulley, hub, spindle, drive shaft, turned parts, external grinding, milling parts, lathe parts, automatic turned parts, galettes, shaft supplier, supplier shaft, shaft supplier, hollow shafts, solid shafts

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

KLUMPP Automatendreherei.

Production of high-precision turned parts, CNC and multi-spindle production.



The more rapidly progressive technological change with increasing demands for quality and precision requires the production of high-precision, complex parts. We specialize in the manufacturing of precision turned parts from all machinable materials in the fields of automotive, consumer electronics, precision mechanics and medical technology. Our main focus is on the production of highly accurate large series that we vote our machinery constantly. The lively interest in new technologies has made us an innovative partner for our customers, whose satisfaction is the ultimate goal of our actions.



TURNED PARTS: Qualified personnel made in 3-shift operation on modern single and multi-spindle machines high volume turned parts in a high precision. In-house tool, the tools are made for production on latest machinery for manufacturing.Latest grinders allow the production of very small tolerances. Purpose, we have four different grinders available.



HEAT TREATMENT, EXTENDED WORKBENCH, MOUNTING: Controlled heat treatment during or at the end of the manufacturing process determines the quality of a workpiece with decisive.
Through our in-house hardening systems or by qualified external service providers, we can cover the entire range of heat treatment. In collaboration with certified and competent partners, we are able to cover the wide spectrum of various parts of treatment processes, such as surface coatings. We supply complete assemblies including the making and procurement of all items - ready assembled and functionally tested.

Knuth-Allmetech was founded in 2004, private capital, 30 employees and is located in the nord-east of Romania in Iasi. The activity of the company is structured in 3 profit centers:
- distribution of a full range of machine - tools conventional and CNC for milling, turning, grinding, drilling, cutting, bending from many suppliers like: Hurco, Emco, Heller, Knuth
- professional services like: installation and putting into work of the machines, training for operation and programing CNC, proactive evaluations, revisions, service, application, postprocessors, automation.
- production of parts based on drawings. Small and single parts as well big and medium size serials. We have capabilities for milling 3 axis and 3+2 axis and turning.

Korrodin has never been the standard distributor for fasteners.

Without having a standard catalogue we specialized from the beginning on in drawing related custom parts combined with highest product quality level and excellence in supply chain management.

Nowadays we are topping off our service level with SuperVendor services and design pre-assorted kits for your most efficient assembly.

www.korrodin.biz

MACHINES FOR WORLD MARKET LEADERS

Core competency process innovation

When working with our customers, customers focus on product innovation and we focus on process innovation. The focus on continuous optimization of business processes and network-like cooperation along the value chain enable efficient production and assembly of complex machines and systems for world market leaders in various industries. These processes are supplemented by the implementation of coordinated logistics processes. The synergy effects resulting from this division of tasks lead to significant competitive advantages.

Koutsogiannis LTD – Steel Workshop was founded in 1994 by Mr. Koutsogiannis and Ms. Christofi. The company has been active for 24 years in the fields of mechanical engineering and repairs, emphasizing in the high quality and fast delivery times.
We are a company overlooking the sea, just 10 km from the port of Volos and above us the Mountain of Centaurs.
We are a small team. Titles and positions are of secondary importance for us.
Fostering long-term relationships with a diverse mix of latest technology and highly skilled employees.
Building on our long experience and in-depth know-how proven in numerous reference projects.
Team spirit is lived every day. We pull together in the same direction.
Together we have overcome any economic crisis.
We have no perfect marketing, but great products and a good advice for our customers.
Our success is confidence in our people and not their control.
Quality is the pride of every employee and not just a corporate goal.
A machining piece which is supplied to the customer is at first a piece from Kostas, Giannis, Nikos etc., and only secondarily one from Koutsogiannis LTD.
Customers are our friends and partners.
Each employee is responsible for the future of Koutsogiannis LTD.

Kovinski izdelki Hrast d.o.o. is a well established and experienced precision engineering company manufacturing millions of precision CNC turned parts and machined components to customer specifications. Since 1985 we supply precision machined components from 2mm to 52mm diameter to many diverse industries worldwide.

With continuous investment in the latest technologies whilst maintaining our traditional capacity and skills, we can compete in volume with emerging economies but with the backing of European sourced materials, full traceability, and friendly and efficient service. This, alongside the latest cleaning, inspection equipment and highly skilled workforce, makes Kovinski the ideal choice for all your subcontract needs.

Process organization of the Kovinski izdelki Hrast d.o.o. complies with the guidelines of IATF 16949 technical specifications.We are using lates measurement equipement to enshure to be able to measure microns. We are using contact and non contact measurements methods.According to costumer needs we can offer 100% control with cameras, SPC anaysis of measured dimensiones and CMM measurement of complex geometries.

We ensure full traceability from raw material to finished components.

Creating dedicated component-specific quality plans:

- Producing bespoke gauging
- Supporting machine capability SPC
- Using non-contact optical measuring equipment
- Creating FMEA, process capability and full PPAP level 5 documentation when required
- Allowing IMDS entry
- Providing certificate of conformity with every delivery

We produce precision machined components from 2mm to 52 mm diameter. Our customers are from automotive, electro, white goods, hydraulic, pneumatic and machine building industries.
Using up to date production and quality equipment we can offer machining of parts from different raw materials like:

Stainless steel (austenitic, ferritic, martensitic)
Aluminum (bars or casted parts)
Carbon and hardened steel (ETG, forged steel, steel for heat treatment)
Brass

Products for automotive industry.

- sensor housings
- screws
- pins
- pivot pins
- shafts
- connectors
- bolts
- washers
- bushes
- nuts

KOVO Letovice, s.r.o. was founded in 2003, in order to continue the business activities of its owners since 1996.

We are flexible company able to support you with quality supplies concerning machining (especially from special hardly machined materials such as inconel etc.).

Fields of supplies:
- metal machining – steel, stainless steel, aluminium, other metals and plastics in small and medium-size batches
- lathing, milling on standard, NC and CNC machines, drilling, grinding, and welding of metals
- production of drawings in 2D and 3D format

KOWE is a reliable partner for companies in the fields of mechanical engineering, automotive, metal and woodworking, medical technology, and aviation. The success of our turning and milling operations depends on the success of our customers and the performance of our employees.

Ensuring the quality of our turned and milled parts goes without saying. But we do more for our customers. We also provide advice on how to manufacture the products in a way that makes them even more technically and economically advantageous for them. To understand and meet customer needs and requirements, one must engage with the customer and actively listen. We are a part of their products, solutions, and quality – WE ARE PART OF IT, and proud of it!

KS Drehtechnik Sauerland
25 years of know-how for precise turned parts

We stand with our name for certified quality, reliability and precision turned parts from our production. All products, which leave our company grounds, are “made in Sundern”. As one of the few companies in this sector we don’t deal with import products, but rather manufacture ourselves. We offer you the best quality in turned parts using the highest technical level, and only high quality materials. With the “Know-How” that has been developed in this certified company over the years, and the qualified workforce as well as the modern CNC machines, we are there for you. It doesn’t matter if you’re using our standard range of products or are searching for solutions which we are able to develop and manufacture for you.

Own production – made in Germany
All products are manufactured by us. At the companies base in Sundern (Germany) we manufacture precision turned parts out of brass, aluminium, plastic, steel and stainless steel. The in-house production is at the heart of this qualified company. Due to this we are able the produce your desired products fast and on an individual basis. Using modern CNC technology we produce oil valves for the automotive industry and their supplier, precision turned parts for the lighting, appliances and electronic industries, as well as fastening turned parts for exhibition construction, advertising and other design orientated industries.

Certified Quality
For many years our company is known its first class workmanship of turned parts and due to this it’s a matter of course that our quality of our products is check by externals. At this point in time we are certified after EN ISO 9001:2008. We have reached this high quality of standard due to our workers, which are always motivated and engaged in their work for us. Many of them have been working for this company for many years.

Always there for you
Personal contact with our customers is important to us. As a family-held company, we are particularly on a trusting relationship with you. Our goal is to get better and for you as a customer to provide the best. Challenge us, for we are pleased to work for you – every day!

We are a Slovenian long-established company, which already more than ten years in the
Metal processing industry is represented. We are engaged in the production of
Fasteners, such as screws and ornamental elements for the furniture industry. The
Our products are manufactured using CNC lathes, automatic lathes and
Machines, which are necessary for a postprocessing of our products. Our
Company is also specialized in the roles of threads in all shapes and sizes.
We also offer the opportunity to galvanize or bronzing products. After
Wish we pack products also.
Our products can according to your request individually or according to standard specifications
be made. In our company, we are aware that the price of the
Is directed to the quality and appearance of the final product. That is why we continually strive our
Products to improve and at the same time produce favorable for the buyer.

Small, young company from Slovakia. We are focusing on precise parts with small tolerances. Owner of a company is also a programmer and setter, with more than 15 years of experience in machining, many years of experience are from foreign countries. Our motto is "quality by any means". We are selling only 100% precise and good parts, we never had any complaints from customers. We never had to repair any parts. We do check every part, it means our control is 100%. We are honest and transparent. We are looking for customers with the same quality properties.

The high-quality treatment and processing of plastics and elastomers is our mission.

Vision, development and production: Our customers use a wide range of services and products relating to the materials “plastic” and “elastomers”.

Whether prototype, single part or series part — whether small, medium or large series: all products delivered by us meet customer-specific requirements and are used in a wide range of industries.

From a variety of plastics, we manufacture products that are used professionally in industry and crafts, in shop construction, exhibition stands and in advertising.

In addition, our customers benefit from our other business segment, which focuses on trading and cutting plastics or elastomers. We have an extensive plastic warehouse, which enables fast deliveries.

Company Profile

Since 1991 Our family manufactures customized solutions made of plastic. In Gornau at Chemnitz today about 50 employees in the fields of semi-finished product processing, container and equipment construction, plant construction and cleanroom technology operate. Our solutions are used in industries such as machine and plant engineering, medical and environmental technology, the semiconductor industry and photovoltaics.
The high quality of our products and services is evidenced by the certification of our company according to ISO 9001:2008.
The internal design office as well as the technically and technologically advanced manufacturing guarantee our customers a comprehensive and high-quality advice and support.
Involve us when planning your plastic just solution. Illustrate With our experience and the available CAD technology and we work out the best solution.
We are happy to solve with our know-how your challenges.


Products / Services

Semi-finished processing
Behälter-/Apparatebau
Transparent Plastics
Wasser-/Labortechnik
Cleanroom technology
Semiconductor engineering / photovoltaics
Piping systems / special fittings
Prototyping / Rapid Prototyping


Machine technology

With a well-equipped and very broad machinery, we can meet diverse customer needs.
CNC lathe turning length up to 500 m 2
Milling Machine CNC 3-axis 1000 x 1300 x 160
Milling Machine CNC 3-axis 2300 x 1300 x 160
Milling Machine

UNCOMPROMISING QUALITY.

We see the exceptional demands of our customers for the quality of our products and services as a standard by which we can be measured every day. A specially developed quality management system ensures the premium precision of our products at all stages of processing. Whether turning, milling, drilling, grinding, assembling — we guarantee our customers uncompromising top performance, functional reliability and high efficiency in the value chain of their end products.

The medium-sized family company Kurt Grützmann Feinmechanik GmbH in Reinfeld is a cross-industry system supplier with the core competencies of turning, milling, eroding and component assembly.