MOLINATI ORLANDO S.R.L. can offer its customers the right technical solution thanks to a wide range of ground precision gear racks:
- standard gear racks
- gear racks according to customers' drawing
- special gear racks
The gear racks by MOLINATI ORLANDO SRL are available in several materials and models – with straight or helical teeth ranging from module 0,50 to module 22 – in different lengths up to 3000 mm and accuracy classes between Q6 and Q11.

A wide choice of materials is also available among which MOLINATI ORLANDO SRL can provide construction steels, aluminium, plastic, nylon and further different materials according to customers' request.

Several options for treatments are also available like induction hardening, case-hardening or nitriding.

Upon request, we can also provide self-lubricating treatments, which reduce friction, or others which protect from oxidation.

All manufacturing and control processes are performed internally at the company's production sites according to specific standards and procedures.

The whole production and inspection process for each precision gear rack is tracked to certify maximum quality to our customers according to ISO 9001:2015 standards.

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations.

Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ...

We twist for you - ask for impossibilities, our sheet metal forming realizes it.

The word is colorful - our longterm experience of perfect surface finishes.

Quality is no accident - our optimized quality management.

Save paper, time and nerves - the best quality in the right place at the right time, all from a single source.

We look forward to all questions, not only to inquiries.

For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

MSB device technology -
Your partner for sheet metal design, sheet metal processing and equipment

For 20 years, MSB device technology is a strong partner in the field of sheet metal design, sheet metal processing and assembly for its customers. design on more than 2,000 square meters of production and warehouse space and we manufacture both complete metal housing, front panels, busbars and entire assemblies and simple sheet metal parts for our customers.

Using our modern machinery, stamping, laser machine and CNC bending center includes, we can respond flexibly to customer requirements and offer the prototype to series production services around the sheet metal processing.

Short lead times and best quality are our claim to the products we manufacture. Since 1996 we are certified according to DIN EN ISO 9001 certified.

Upon request, we also supply fully assembled and tested modules to our customers.
Convince yourself of our performance and quality.

As specialists in metalworking and surface finishing, we turn thin sheet metal into precise shapes. From sample production of components to small series production, as well as the production and assembly of system components, we are regarded as a competent, reliable and long-standing partner for renowned companies in medical technology, analytical technology, optical electronics, safety technology, sensor technology and aerospace technology.

The MWA CNC technology is a medium-sized company in the field of mechanical engineering and materials handling.

Our company has a permanent staff of qualified staff with many years of industry specific experience and outstanding expertise.

An efficient, economical and high quality production requires high precision in all stages of production at constant quality control.

We offer the full range of CNC turning and machining technology and are therefore capable of all jobs economically, accurately and cost-effectively handle.

Quality, reliability and flexibility are the basis of our high level of customer satisfaction.

The company MWM GmbH & Co. KG, founded in 1998 as a sole proprietorship by the owner and current managing partner, Mr. Michael Wilmes, is a partner of the metalworking industry.

MWM sees itself as a system supplier in the field of manufacturing goods and processing components made of aluminum and other non-ferrous metals. We offer our customers full-service solutions in many areas, including procurement of the necessary raw materials and processing through to surface finishing and subsequent assembly.

"Qualified employees and modern production machines combined with a high level of commitment and flexibility are the key to success!"

The decision to align all business processes according to the rules of DIN ISO 9001-2015 and to carry out continuous improvements secures jobs and a consistently high level of quality, from which you as a customer benefit first and foremost.

We manufacture various plastic components individually according to your wishes and requirements, as well as support you with our know-how in the planning and implementation of your project. With our various processing methods, we have the possibility to carry out the entire component processing.
Alternatively, we will be glad to assist you in subsequent work such as contour adjustments or deburring of existing components.

Family-owned company with own toolfabrication and own production.

The NIEROS GmbH specializes in the production of stainless steel products and has been in this area for a very long tradition.

We manufacture technically advanced products for the food, pharmaceutical, and chemical industries.

A main attention is paid to the development of our products and our know-how.

We offer you together with our partners a complete solution including advice and service.

NIEROS is a globally-oriented company, which exports more than 90% of its products. Our products are sold in every country in our well known partner.

Our basic product line stands for high quality and covers the needs of all discerning customers. We were exhibited in 1998, the ISO 9001:2000 certificate.

Lasers



A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself

We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages:
We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately.

Bending



Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses.



We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure.



In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts.


Welding



Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free.



As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum.



We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting.


Edit



Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems.



The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts.


Surface


As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it.


Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available.


Labels can be designed as a laser marking, engraving or the screen printing method.

Nobels Machinefabriek has acquired a name after its founding in 1955 as a versatile production. The flexibility, the very modern machine park and the expertise of employees, Nobel has the capabilities to produce equipment and products of very different nature and size range and to meet the highest standards of quality of delivery.

Besides the serial production of machinery for agriculture and horticulture, are also manufactured by Nobel complete palletising systems, where all engineering and production into their own hands.

The employees at Nobels Machinefabriek have their own specialty. We are constantly working to the business processes of the various companies on aligning, through intensive cooperation. The efficient collaboration ensures that we can act in conformity mark and comply with the agreed delivery times.

Nobels Machinefabriek also works with schools in the area and regularly offers internships to bring theory and practice closer together. Several trainees after obtaining the degree to Nobel started working.