Bending and forming: benefit from efficient e-sourcing

As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

Worldwide design and production of conveyor chains, sprockets, machining (e. g. milling, turning) and hardening

The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

ZAKO bring ideas into form. ZAKO metal technology offers the entire range of sheet metal processing, from the board to complex assemblies, from single parts to large series. We stock and process sheets of various varieties and strengths. Perfect planning. Experienced designers and engineers create with impressive 3D design tailor-made solutions for your projects.Competent and creatively makes ZAKO ideas perfect products. We are customer focussed, flexible, fast and reliable. Technology that inspires. The latest CNC laser technology and a fully automated high bay warehouse are also in use as punching technology, press brakes, welding robots and innovative Entgrattechnik. All this guarantees the best possible quality and efficiency. ZAKO - before we finished. Tags Sheet metal, engineering, sheet metal work, sheet metal processing, metal, metal art, metal processing, metal processing, laser cutting, laser cutting, laser processing, laser technology, punching, punching, punching technique, deburring, deburring, bending, Bending, bending, bending technology, riveting, riveting, riveting, clinching, clinching, welding, welding, MIG, MAG, TIG, contract manufacturing, contract manufacturing, steel, stainless steel, aluminum, sheet steel,

We have a broad technology knowledge for cutting, welding, brazing and hardening with the laser beam. This we use both in contract manufacturing and engineering projects as well as engineering for our customers. We offer Twelve-modern laser systems, equipped with self-developed technology and process monitoring systems Engineering, contract manufacturing and engineering from a single source Quality Management System according to DIN ISO 9001 -Extensive experience in process development and mass production

The Schulz Conveyor Systems GmbH with its seat in Gräfenroda was founded by Mr. Peter Schulz 1991st Immediately after the foundation began to invest in the latest technologies. Aided by the laser cutting technology, which had its technical breakthrough early 90s, the clientele, and thus the company grew rapidly. Within just a few years on the former site of an old glass factory an advanced sheet metal manufacturing. After the laser technology also held technologies such as the folding and welding feed. In 1997, Schulz conveyor systems GmbH took over part of the Gothaer Fahrzeugwerke. Thus opened up for the company, a new line of business - the automotive industry. Today the company Schulz conveyor systems GmbH is a solid medium-sized company, which adapts through a flexible, broad-based manufacturing processes and the rising and volatile market conditions and requirements.She specializes in the manufacture of welding and assembly, as well as laser and metal parts. To continue in the future success of the company in the usual manner, the following business objectives: Ausbau and consolidation of market position Fertigung highest technical level Lieferung best quality Automatisierung manufacturing Erhöhung of technical, professional expertise to assist customers with constructive issues and cost reduction Erhöhung production depth

We are a trading and manufacturing company that is already over 5 years successfully operating in the market. Our main activities are supply precise burnouts and rolled plates of various kinds of conventional mild steel, stainless steel, boiler plates and steel for decoration. BURNTS In the area of flame cutting, we offer complete services. Modern CNC flame cutting machines allow precise manufacture of internal parts of the highest quality to plate thickness 300 mm and imports from EU countries we can even offer parts up to 500 mm thickness. LASER Jobs that place a high value on the accuracy and cut surface quality of the internal edge, can on a laser firing plant with exact dimensions up to max. 2000x6000 mm and a plate thickness up to 25 mm can be processed. OXY AND PLASMA With oxyfuel cutting torches or plasma jets we cut workpieces of a single weight up to 12 tons and a sheet format to 3000x12000 mm. After specific customer requirements we can offer to the internal parts additionally comprises: Quality certificates and declarations of conformity Labeling with marker or engraving edge grinding Beams with steel shot NDT ultrasonic testing Bending of internal parts to 8 m in length Transport with own vehicles or via freight forwarding In some cases, replacement of internal parts for blanks of thick-walled pipes, profiles or forgings.

Stahbaul and metal processing plant. metalworking

Manufacture of metal parts and assemblies Service: joint development and manufacturing from small to large series Processing of various metals (steel, stainless steel, aluminum, copper, brass, bronze) Metal thickness from 0.1 mm to 6 mm Versatile machinery Additional facilities for welding and joining 75 employees 15 staff in the project team 09 employees in the tool shop 04 employees in the Quality Team Sales Office in Frankfurt iso 9001 certified 96% service rate

In contacting Franchin's mechanics you will find a dynamic company with a strong spirit of innovation, capable of seeking new solutions, even the most personalized, always ready to offer the best of herself in formulating formulas for an efficient and complete service. It was born in 1975 at Montebelluna near Treviso, with the aim of setting a point of reference for any company that needs molds for cold stamped sheet metal products or special turnovers, or to find solutions to its own constructive needs in this field. Our relationship with the customer is not simply reduced to a supply contract but we provide a wealth of technical knowledge and a range of practical solutions that are more than thirty years of experience. We also allow our Customers to design our product (E-Project) with us, to determine the desired quality and finish (E-Quality & Finishing) as well as numerous packaging and storage modes at our warehouse (E-Stock Market). From a little advice to a more complex technical analysis (E-Link), the contract with the customer always translates into a relationship of trust and collaboration, which has enabled us to establish and develop time. Alongside our experience, we can now boast cutting-edge equipment, able to respond to almost all the construction requirements in cold molding, turning and machining.

We are a company specializing in the production of metal and PVC details, we have our own tool room and our own galvanizing plant

The company FDB - wire bending and stamping parts was founded in 1995 in Allersberg. In the years that have passed, we have been able to expand our company further. In 2003 a move to larger production halls became necessary. We found this in Hilpoltstein, Industriestr. 18, where we still have our headquarters today. We currently employ 40 people. The company is run by the Bode and Frassa families.

IN.CO.M. Srl is a family company based in Italy, in the Marche region, in the Province of Ancona. Founded by Mario Campolucci in the 60s, it was born as a small workshop to grow steadily to become a reference point for the construction of industrial machine components, semi-finished products and carpentry work in stainless steel, iron and aluminum. From sheet metal laser cutting to final treatments, through assembly and welding. In 2020 the company is managed by Matteo, Giovanni and Mario Campolucci (members of the board of directors and president) and is a long-term supplier for some of the major companies in the agricultural food sector and in various other industrial sectors such as the packaging industry , medical, chemical / pharmaceutical and special waste management.

We, as the company TBR Metall GmbH, are a medium-sized company that specializes in all forms of metalworking. We are a reliable supplier for both individual parts and series production, from design to welded assemblies.

We are a reliable partner for quality and precision metal fabrication and metalworking at competitive prices. Thanks to our strategic location in the heart of Europe, the many years of experience of our team and modern technology, we provide a wide range of services from design through production to on-time delivery.

Varinox Kft. is part of the metalworking arm of a larger group of companies called Arago Group (over 160 M EUR in turnover, over 2000 employees), it is specialized in stainless-steel specialty structures and products for the energy and water treatment industries. These include e.g.: specialty frames, support structures, tanks, vessels, casings, etc., for mainly western-european partners. The company has high-tech machinery (Trumpf 3D laser welding/cutting cell, fiber-laser cutters, CNC press brakes, HAAS CNC machining centers and lathes, etc.) and highly skilled workers (~40 headcount), so it mainly targets smaller and higher precision TIG (WIG) welded structures with dimensions up to 3.000 mm and preferably to be supplied as serially manufactured parts.

We are one of the largest companies in Lithuania offering a wide range of metal processing services under one roof. We provide comprehensive metal processing services, from cutting to painting.

VR Technology was born from the synergy of a group of entrepreneurs who have been operating in the steel sector for decades to allow them to expand their range of services to the customer. Thanks to its technical structure and thanks to its machinery, the company is able to act as the sole interlocutor for the customer as it is able to manage the entire production process and provide "turnkey" orders. VR Technology focuses its attention on the construction of structures for the most diverse fields of use, such as: o Cableway (station structures, frames, supports, trunks, trees, pulleys and spokes); o Lifting systems (gantry cranes, bridge cranes, jib cranes and marine cranes); o Machine tools (press bases and bases); o Hydroelectric (Pelton, Francis, Kaplan boxes, distributors, suction and bifurcated pipes); o Waste treatment and disposal plants (tanks, agitators, ovens, boilers, chimneys, heat exchangers and combustion chambers); o Civil and industrial constructions (welded beams, complete structures and columns); o Fixed and transportable rides; o Production of design details including mechanical processing. Mechanical processing is the cornerstone of production activities. Thanks to its flexible structure, the company can vary its production according to the needs of each customer. VR Technology relies on qualified welders according to UNI EN ISO 9606-1, the entire welding process is performed in accordance with UNI EN ISO 3834-2. The companies that Vr Technology relies on for non-destructive tests provide 2nd level qualified personnel in accordance with UNI EN ISO 9712. The company is undergoing EN ISO 9001 certification. We remain available for more detailed information, or for any requests for offers.