Luitpoldhütte AG is a worldwide foundry that manufactures high-quality castings products. We supply castings for agricultural engineering, the truck and off-highway industry and the refrigeration plant. We see ourselves as an extended workbench for our customers and are known for superior quality and comprehensive service!

Lüneburg, metropolis of the recreation area in the heathen, is also the center for business and commerce in the region.



Their meaning the city gained by the reduction of "white gold" of the salt. However, the smelting of iron ore turf gained in the mining was at that time an important industry. Thus, the origin of today Lüneburg iron work is already the first mentioned around 1840 and is now in the industrial area "port" located on the outskirts of the Lüneburg.



Production and management, designed according to the highest standards of efficiency and performance. Today, the Lüneburg iron plant produces about 160 employees per month approximately 800-900 tons of gray cast iron and nodular cast iron in all common materials.

MAGXYARMET is a well-known European supplier of ready-machined castings, which find their application in various engineering branches. The company has been producing high value alloy steel products since its foundation in 1981 and is nowadays the leading Hungarian investment foundry.

During the past decades the technology has been steadily improved and automated, the castings and components are produced mainly in small and medium sized series. MAGYARMET unites the accurate lost wax technology with a wide variety of materials: low-alloy steels, high-alloy steels (corrosion- and heat-resistant, dupley), war-resistant alloys, Nicke- and Cobalt-based alloys, bronze.

Our technology enables the production of castings weighing between 0,050 and 45 kg. The products of MAGYARMET are used in pumps and valves, instrumentation, food stuff processing, general and chemical engineering, petrochemistry, filtration and packaging equipment, automotive industry and other vehicles, medical equipments, big engine production, process and general engineering, construction etc.The bigger part of our products, approximately 75%, is exported to Germany, Switzerland, Great Britain, Austria, Spain, France, Finland, Denmark, Sweden, Italy and the Netherlands.

The continuous development and the aim to satisfy the demands of various markets led MAGYARMET to start rapid prototyping. This technology joins together the high-tech laser printing technology and the exceptional development of MAGYARMET during several decades in precision investment casting. Rapid prototyping based on 3D printing makes it possible for customers to get the required part machined and ready-to-assemble within two weeks.
MAGYARMET offers full service and ready-to-assemble parts. Our machining shop currently has more than 20 CNC turning and milling machines, NC controlled key-seating machine and other conventional machines at service.


For further information, please, visit our website: www.magyarmet.com

MAKIM has been founded in 1982 in Ankara Turkey and now operates in 3 main sectors, which are investment casting, access control systems and electromechanical devices. MAKIM has been manufacturing investment cast parts since 2000 and now operates in a closed area of 2500 square meters with around 110 employees overall in Ankara, Turkey.

MAKIM offers parts from mainly steel, stainless steel, cobalt and nickel base alloys; from 5 gr to 20 kg by weight depending on the size. MAKIM has a manufacturing system that allows to produce from very low batches to moderately high batches. The manufacturing capacity is 600 tons/year for steel alloys.

MAKIM serves the industries of general machinery, medical implants, valves and pumps, energy, automotive and food industries. MAKIM manufactures parts for domestic as well as international markets and exports 33% of the production mainly to Germany, France, Netherlands, United Kingdom, USA, Belgium, Hungary and Sweden.

MAKIM provides customers, only castings as well as fully finished parts including machining, heat treatment, surface treatment. MAKIM has in house tool and machine shop. MAKIM has strict quality control requirements, has in house NDT facilities including Radioscopic Inspection, Magnetic Particle Inspection and Fluorescent Penetrant Inscpection with certified quality control personnel according to ASNT-SNT-TC-1A.

MAKIM holds ISO 9001:2008 Quality Management System Certificate, ISO 13485 for medical devices, AD2000 Merkblatt W0 for pressure purpose castings, ISO 14001 for environment and ISO 18001 for health and safety.

We are an aluminum and secondary alloy foundry,
we deal with mergers for different sectors:
Automotive-pneumatics-electric motors-Agriculture-coffee machines-automotive parts-lighting-immersion pumps-valves-jaws-irrigation-etc.
We also produce both shell and die cast molds.
We do mechanical processing according to design.

Diene production services

Precision and experience. manroland is the world's second-largest press manufacturer with about 900 employees. The printing presses lives of precision. You can profetieren it, for manroland has many years of expertise as a world leader not only in sophisticated printing machines:
Our professionals bring their years of experience with a manufacturing services for you.

Quality testing and certification. manroland is certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001:2005. Annual audits ensure the honing demands on the processes safely. With our machines almost every feature can be verifizeirt professional manner. In addition, our laboratories provide materials analysis and Schlissbilder.

Own foundry. The foundry with integrated model for large parts in Offenbach with an annual volume of up to 17,000 tonnes of cast iron saves valuable time in the match between model-making, foundry and manufacturing.For shorter lead times and lower costs for our customers.

Diverse range of parts. From the lever through gears in Meisterradqualität to extremely heavy side walls, with tolerances of a few microns, thanks to a modern machine park. Also the production of any workpieces from batch size one is in the fast group everyday.


Rotary bulk of production

Rollers and cylinders. manroland offers the complete process chain for machining of cylinders and rollers:
Turning, milling and drilling into a voltage on modern CNC machining centers and final grinding. There are also successful partnerships for gavanische surface finishing.

Non-circular grinding. The special features of the machinery for rolling and the cylinder with appropriate controls is also the non-circular machining of precisely defined contours no problem.


Prismatic large-part manufacturing

Bulk of production.manroland manufacture components with size 2.2 meters wide x 2.5 meters long x 2 meters in height and weighing up to 2 tons. In the doubles table operating a processing to eleven meters in length. Our machines operate with a capacity of up to 100 kilowatts. Tools with a diameter up to 315 mm cutting depths allow con about 15 to 20 millimeters compared Gussverzüge and cast tension, with high-precision manufacturing of drilling intervals.

Flat part manufacturing. CNC machine tools allow the highly efficient production of cubic flat parts with a machining of up to five pages in one setting. The machine tools are mostly equipped with special Ganauigkeitspakete ensure the highest quality for large component dimensions.


Prismatic workpieces geometry primarily by complete machining on special parts that meet any of aluminum are in high quality requirements for CE-safety-related parts.For this we use a moderene five-axis machining round.


Complete production

Complete machining. The device construction, the tool engineering and CNC programming are aligned short response time for changes and new parts. Complex cubic workpieces are manufactured in several setups in multi-range operating on different processing centers:
Small series of cast blanks with complex hole pattern and high quality requirements (up to it5) are among the references (levers, rails, slats and gear housing).

Turned parts. Rings, flanges and wheels of medium dimensions are produced, but also gear shafts or special Exzentergleitlager with tolerance ranges of up to seven microns, including modern external and internal cylindrical grinding techno...

since 1922, we produce successful quality parts and assemblies made of die-cast zinc and later also from thermoplastic materials. In the area of zinc we produce hot chamber die casting machines with a clamping force of 25 t - 100 t with unit weights of 1 g - 1,200 g in the plastic injection molding foundry will process all common thermoplastics to parts weighing up to 150 g. Through the use of modern technology, we meet the demands of many renowned companies from various industries:

Automotive
Home appliances
Construction & Hardware Technology
Toys & Promotional Products
Electrical & Electronics industry
Medical

Attention we always pursue the technical development of the production to take advantage of innovations to benefit our customers. That makes us a partner for economic and reliable production. And for good reason.

Because - We bring your ideas into shape!

With us, the service does not start in production.Already in the development and design of new products, we provide our clients with advice and practical support you with our know-how. Beginning with the implementation of feasibility analysis work, our experienced professionals work together with customers to develop successful products. Because even in the design, it depends on a die-cast oriented planning. With us, the customer's ideas to be implemented in optimal production solutions. Our offer is varied and above all, flexible. In our extensive range of machinery is carried out in an economic processing of different batch sizes and a wide range of unit weights. The provision of fully assembled and surface-treated products is given by the distance to qualified agents at any time. We see ourselves as "complete" - provider, wherein the degree of production depth is determined by the customer.

Matthies Druckguss has been working with you as a partner since 1955. During this time, we have been able to gain significant experience and acquire important knowledge in the field of die casting, which makes up our know-how.

Today, we are not only the “die-cast supplier” for our customers, but also take on a wide range of tasks for them (system supplier), with the aim of a cost-effective product. By selecting nine different alloys from the areas of aluminum, brass and zinc, intensive advice during the initial planning processes, precision-precise design and subsequent custom-made production of series parts, we guarantee that we will meet your requirements.

Together with you, we develop the optimal casting part, plan the optimal layout of the casting system and finally manufacture the mold in our in-house tool shop. We then sample the first tool-falling castings under series conditions and present the samples to you.

If everything is in order, then we start our fully automated series production in our die foundry. In further steps, the cast raw parts are deburred and mechanically processed using precise CNC processing centers. Finally, the finished parts are prepared for shipping. With our partner shipping company, we ultimately ensure fast and problem-free delivery of the goods.

We see ourselves as a system supplier. Because this is how we make things as easy as possible for our customers and their ordering as pleasant as possible.

We take on all tasks from A for “delivery of raw materials” to Z for “delivery of finished castings.” And since everything comes from an experienced source, customers can rely on the fact that consistently high quality is guaranteed and that the results will be delivered to the desired location in exact quantities and on time. Thanks to a local partner shipping company, a rarity among die casting service providers, delivery is neither delayed nor do customers have to contact third parties.

It's obvious that our logistics department not only takes care of the delivery itself, but also the required packaging. Relevant benefits that are decisively reflected in satisfaction time and time again. Unbeatable when it comes to service, too: We can react flexibly even if changes are requested at short notice. And thus deliver a full range of die-casting services with a well-thought-out system.

A functioning production chain that ranges from the initial die-cast idea to the sample piece to the finished series.

- Various aluminum, zinc and brass alloys
- Certified according to DIN EN ISO 9001:2015
- custom-made castings
- short delivery times
- perfect quality
- Use of proven and innovative technologies!

These are just a few of the features that make for exciting precision work. Personal customer advice and support is just as important to us. We support our customers right from the start so that the result really meets their requirements — a matter of course for us as a family business.

Our company Mazaka Endüstriyel Ürünler Sanayi Ticaret ve Teknoloji A.Ş. established in Ankara in 2004 and offers its customers intermediate products needed in several fields, particularly production technologies, control automation systems, medical, and home-office.

Our company, which aims to provide solutions specific to the needs of the sectors, has take it as its mission to provide competitive advantage by increasing the efficiency of our customers' production processes, to have effective business models and to create added value.

In addition to the supply and sales of world-leading brands, we also implement domestically produced high-tech products with our own R&D and production activities. In line with the demands that come with these, we make turnkey projects and also provide engineering services.

Headquartered in Ivedik Organized Industrial Zone, Ankara, our company provides services as a warehouse and office in an indoor area of 1000 square meters. In addition to the head office, a branch was founded in 2018 in Ankara for production activities. Then, in 2020, another branch was joined to the Mazaka family within Ankara Teknopark in order to carry out R&D activities.