As a competent partner, we offer you montages or varnishing of all kinds as well as quality and rework services in Germany and non-European countries. We would be pleased to advise you free of charge.

Our QA or rework team is flexible and mobile. Thus, we can act for them in the shortest possible time and are on site with your customer or yourself. We are priced here from 23 € / h.

Our painters have up to 30 years of experience in things
Hand painting, even difficult small parts as well
Large-volume components are no problem for us.

The pure varnishing (in Germany) carries out for us a contract painter, all necessary certificates are available here. We will be pleased to send you these on request.

Our 2nd production site is close to the border
Bosnia-Herzegovina.

This means that we also have a transport company
We can give you the components even cost-effectively up before
The door.

We speak all perfect German, which will be orders
Controlled and planned by Germany, thus
Spare yourself this long journey to our
Production facility.


Currently there are 14 employees in hand painting in
Approx. 20 employees in the assembly at free disposal.


Our goal is to offer you the best quality at reasonable prices. Do not worry and write / call us we will advise you free of charge.

Custom Special Tools BV is international partner for special machining and repairs on high-value technical components.

CZL Tilburg BV is specialised in surface treatments and repairs on high-value technical components.

Machining: certified laser welding, TIG welding, precision grinding (surface and profile), honing, polishing, precision machining, high speed milling, EDM, repair high-tech components.

Plating: Harchrome plating, Electroless Nickel, Black Oxidizing, HP-HVOF Thermal Spraying, Dura-Extreme®, Dicronite® Dry Lubrication, Micro Chrome Plating (MCP®), Blackprotect® black nickel and SuNiCoat® Optics (Diamond Turnable Nickel).

All our processes and treatments are executed in accordance to EN/AS-9100 and customer specifications.

We are a medium sized Slovakian company that was gegündet in 1994, and operates in the field of mechanical engineering. We employ 25 stable employees.

Our headquarters is located in Vrutky, cca. 220 km north of Bratislava. Almost 90% of our output is delivered to deutschsprächigen countries.

We are welding in Schutzatmoshäre of CO2, Ar, ArCO2 / currently 90 varieties / small
up to 600 kg heavy weldments with the emphasis on quality.

If necessary, we can also provide corresponding fluoroscopic image of the weldments.

Furthermore, we manufacture for our customers, the metal-resin and wood models for the individual production as well as for mass production.

Also casts from aluminum and cast alloy / small and medium-sized series /.

We offer:
- Welding
- Welding in general
- Gas metal arc welding (MIG / MAG)
- Turning
- Milling
- Mold

Translation by Google Translate

We are a medium sized company with decades of experience in machining.

Our focuses are:

CNC turning and milling
Fully assembled modules
Machined Parts
Grinding
High temperature brazing under vacuum
Arc welding
Electron beam welding
Treatment of surfaces
More on request

By investing in modern machining technology we were able to take a firm position as a supplier of turned parts - save milled parts.

In addition to many small and medium-sized companies, we also supply for decades, the various works of ZF Friedrichshafen AG.

We design and manufacture parts or sub-assembly incorporating several technologies:

Plastic injection molding, ceramic injection, turning, mechanical studies,

Assembly, surface treatment, Cutting & Forming.

Casting Zamak group member ID CASTING ZAMAK number 1 French and the European top.

Located between Scohaux and Mulhouse at the Swiss border, we are focused on sectors including consumer zamak the automotive sector.

The site is ISO 9000 and ISO TS 16949.

Our customer references are SCHNEIDER, VALEO, AUTOLIV, ITW, WABCO, LEGRAND ...

We develop on behalf of our customers drawings of parts and equipment through our engineering department using the software Pro-Engineer.

Our tools are made in-house or with our mold makers referenced.

We manufacture since 1938 metal products for technical uses, punched, laser cut, bent, bent, deep drawn, pressed, drilled, threaded, countersunk hardened. Our range includes filter screens with or without borders, disc springs, washers, saddle washers, high precision shims, complicated shapes (with or without bends or deep trains) with total or consequential cuts, etc.



We have not formed a department for surface treatments, but thanks to good relations with relevant specialist firms also get this.



Punched parts made of all metal or of plastic sheets such as nylon, Teflon, insulation, polyester film, fiber, PVC, laminated paper, pressboard, etc. belong to our product range. Thanks to a large stock of raw materials, with more than 1,300 different varieties or thicknesses we can deliver at very short notice.



The tools required for our manufacturing are produced in our own tool shop.We can advise you when planning or designing a part, in order to develop the most economical solution.
Our specialty: R total - in the quality design, concentric and flat, of any material suitable for punching, even small series. General Tolerances: + / - 0.05mm. Since we make mostly non-standardized rings according to the special requirements of our customers, we do not hold the finished goods warehouse.



Your advantage: It is worthwhile to consider whether twisted washers could be replaced by punched in every respect. In addition to pricing advantages, the choice of material is particularly less concentrated towards higher strength and corrosion resistance.



Our viewable and downloadable here (HTML table) tool list (see website) will show you our facilities. This tools not included can be produced at short notice and with excessive costs due to the internal normalization.



Ask us.

The list (see homepage) contains the existing complete sections that are constantly updated. Moreover, we have for cases where the preparation of a complete section due to small numbers does not justify a large number of simple circular cuts.
These can be for diameters over 50 mm within the substance is technically possible in two passes, ie outer and inner diameter punched separately while maintaining concentricity, combine arbitrary. This with a tolerance of + /-0.1mm. Another reason to ask us!



Further manufacturing opportunities exist for smaller series from 120 - 1200 mm diameter at a max. Material thickness of 3 mm (circular shear).

We design, develop and produce mechatronic (electro-mechanical)
Components, devices and system solutions and exclusively according to customer
Specifications.
The company manufactures in two locations in the Czech Republic and two locations in the
Bavarian Forest.
The four divisions include sheet metal production with its own powder
coating, cable assembly / wire harness manufacturing, tool and fixture and
Fixing of printed circuit boards (electronics manufacturing).
With our own development and Konstrucktion we support our customers already
in the Entstehungsfase their products.
Our goal is to provide the customer with a complete system.

Supplier of mechanical pieces et sub-assemblies

About Us

Dopfer Precision Mechanics and Maschienbau is a company that specializes in high-precision machine single and serial parts. Founded Dopfer Precision Engineering
in 1991 in Gabelbachergreut. To continue meeting the high demands of precision ments, the company was relocated in 2001 after Zusmarshausen in a newly built hall of 500 sqm.
The expansion allowed for an extension of the Maschienenparks as well as the expansion of the team to the now five dedicated and skilled Zerspannungsspezialisten belong.
We all work with the common goal is always to meet the needs of our customers through inovation and skill.

Production

Is produced on machines with the highest quality standard. We work with both conventional and numerically controlled lathes and milling machines. In addition, a surface grinding machine, shielding gas are - and Wig welding equipment for steel-VA and Aluschweißung available.
As a further core activities we can offer you work-hardening, Teniferbehandlung, as well as plasma Trier works. Cylindrical grinding or assembly can be carried out at the request enbenso.

Service

We specifically to your wishes and advise you in choosing the right material and to show you the best manufacturing process for your product. Of course, we help you find the right solution for problem cases. We have special-purpose partners or contacts with designers and control farmers. This gives you the security of knowing that when your tasks a komptenten contact person at your side.

Dörfler & Schmidt is your service provider for surface grinding, tumbling, double face grinding, blasting and brushing. We deburr, round and polish metal and plastic parts in series.