The company Koenig is a newly established, modern décor companies in the CNC manufacturing. With high quality CNC machine tools and qualified employees, we realize your precision manufacturing at competitive prices! We guarantee flexibility and adherence with high quality. You will find us right in the center of Rathenow, the city of optics, about 60 km west of Berlin

Prämab GmbH & Co. KG 78 Employees Certificated quality assurance: DIN EN ISO 9001:2000 Certificated quality level for welding: Extended welding certificate according to DIN 18800 Additional welding certificate: Permission for welding on railway-vehicles according to DIN 6700-2 Abilities Welding, Machining, Workshop assembly Manufacturing of heavy and complex parts with high quality Shop assembly of machines for special purpose On-side erection, Commissioning Engineering Taylor Area maximum weight of single parts: 20 t CNC-torch cutting device material thickness up to 250 mm working range 3.700 x 12.000 mm Sand blasting machine cross-section up to 1.500 x 500 mm Sawing machine maximum diameter 500 mm Welding Workshop maximum weight parts up to 90 t manufacturing area 16.000 sqft Equipped with modern welding gear, MAG-, Impulse-, WIG-welding devices Flame heating and flame straightening technology Machining Shop maximum weight parts up to 90 t several boring mills, CNC table size 5.000 x 9.000 mm 6 - Axes turntable size 2.750 x 3.250 mm working range x,y,z: 12.000 mm,4500 mm,1250 mm maximum accuracy +/- 0,05 mm Turning machines maximum diameter: 250 mm maximum length: 2000 mm Milling machine table size 1600x335 mm working range x/y/z 900/ 355/ 450 mm Radial boring machine maximum boring diameter 100 mm max. working radius 3.000 mm Workshop Assembly maximum crane capacity: 90 t assembly area: 7000 sqft height shop crane: 40 ft Clamping plates for accurate assembly of complete machines and components Assembly of electric parts, wiring, piping of hydraulic and pneumatic is made by fixed local subcontractors

Production to approximately 3,000 m² production area: Flame cutting Stress-relief annealing up to 3,500 x 2,100 x 1,500 mm and max. 750 ° C. Discus loops of up to 6,000 x 1,300 mm. Long planing to 6,000 x 1,500 mm. Portal milling up to 5,000 x 2,400 x 900 mm. Guideway grinding up to 9,000 x 2,200 x 2,000 mm. Surface grinding up to 9,000 x 2,200 mm. Timely delivery by large warehousing and modern production methods.

Gradert Engineering is specialized in turning, milling, grinding and measuring of high-precision, custom-made machine parts as well as in their assembly to machine components including the production of rolling bodies with the necessary coatings for printing machines, film coating equipment, corrugated equipment, textile and paper machinery etc. The rolling production is carried out of different materials such as steel, aluminum, CFRP (carbon fiber reinforced plastic) and GRP (glass reinforced plastic), including their surface coating with plastic (polyamide 11), rubber, polyurethane, silicone, chromium, copper, nickel, ceramic, Teflon etc . Due to the high qualification of the staff and the use of advanced machining and measuring equipment Gradert engineering is able to ensure the highest quality standards in terms of surface quality and shape and dimensional accuracy of renowned customers in the international mechanical engineering. The company was founded in 1971 by Fritz Gradert is still an independent family business based in Schenefeld in Schleswig-Holstein, about 50 km away from Hamburg. Today at this location are nearly 200 employees who make precision work on over 10,000 m² of production space.

The Company: The company BOSSCARAL is a young company with a lot of enthusiasm and drive. Our aim is always to be a helping support for our customers, as well as through continuous development of new jobs, to create more training places and machine capacities. Customer satisfaction is our highest priority With profound technical background, experience in many industrial production processes and extensive manufacturing capabilities, we can ensure our customers an attractive solution. Our flexibility with optimal quality and reliability, we are a respected supplier for well-known industrial companies. Our exceptional creativity, great interest in industrial design and extensive know-how are available to the occasion in this industry with full commitment to the side. Range of services: In addition to our biggest strength, metal machining, we have to ensure to each other constructive, technical production skills which a complete solution for our customers. In addition to the series production and special design of individual parts, we are always the right partner in the manufacture of products, assemblies and prototypes. On your demand we supply other necessary components such as bearings, O-rings, compounds, magnets or other standard parts, which are needed for the production. We also do special technical developments and special research on new, different areas of requirements of products. Benefit from the advantages of our oriented on customer needs corporate concept: * A point of contact for complete assemblies from external manufacturing * Low transport times, followed by lower transport costs * Reduced error rates by eliminating information transfer * Capacity relief of your own manufacturing capacity * Time saving due to lower overhead Competencies: From our own production: * CNC and conventional turning and milling * Round and flat grinding * Qualified assembly technology * Magnetic mounting * Sealing Technology * Installation of electronic components * High-strength adhesive technology * Processing of special synthetic resins * Faserverbundlaminierung

Erbsfors has specialized on milling plastic, brass and aluminium products from solid blocks. The major machines are 4 CNC milling machines and 1 multimilling machine, accomplished with several supporting manual machines (such as threading and drilling machines). Machine working area: 300 x 150 x 80 mm. Tolerance: +/- 0.02 mm. Surface treatment: Anodizing, painting and screen-print (by use of sub-contractors). All operational processes and documentations have ISO9000 as guidline.

Who knows, chooses aluminum. And professionals working with it. Therefore, we are your one-stop supplier for all extrusions. Open to new ideas. Have to virtually any profile specialists at hand. Develop us with your requirements. And take over the entire processing to semi-finished or finished product. * Solutions from one hand * Wide range of components * All profiles and cross-sections * Special Drawing shapes and profiles Up to a length of 16 m On request: Fully assembled and in their original packaging Equipment: We are our great staff guilty. But first of all you - rightly demanding clients: Our modern machinery includes numerous sawing, punching rigs, CNC machining centers, deburring and vibratory finishing equipment. Your contact with us: engineers and technicians. Always with outstanding expertise. Always with special additional training. Because aluminum is not a luxury. But a good alternative. You know? Then we are your partner

CARDIAC stands for innovative design of the highest quality. We manufacture and distribute our own line of products for the areas of * Accommodation * Shopfitting * Office equipment Our company manufactures but also according to your drawings and requirements - even in small quantities!

Company Lenx sro is a Czech company with 15-year tradition. Equipped with CNC milling, CNC lathes, CNC Wire EDM Machine and conventional machines. We deal with the production of precision machine parts, tools and equipment according to customer drawing or own design. We offer a complete production loudly of our machinery equipment. The company has 15 employees. Translation by Google Translate

Since its founding in 1988, we have a lot of credit in the domestic, as well as on the foreign market condition. We have the most modern production technologies together with a highly qualified staff, which allows the execution of very specialized and responsible work. We specialize in the manufacture of small and medium-sized series of components for the aerospace, medical, shipbuilding, railway engineering, military engineering and the automotive industry.

Master Engineering BV focuses on developing, producing and assembling precision components for industries with high demands on both the quality of the product as to the quality of the manufacturing process. Master BV is supplying prototypes and small to medium-sized production series.

Kamat is a medium-sized company that manufactures high-pressure technical components and equipment, especially pumps and markets around the world. On Witten All products are designed, built and marketed. The vertical integration of production at Kamat is very high, as is only to provide a maximum level of quality.

Master machine operation We serve our customers in the planning, design and production of your projects competent and reliable. To the wishes of our customers in industry, crafts, to meet and end users, we place the highest value on quality, creativity, Flexibility and innovative solutions.

Let us introduce ourselves The company’s headquarter is located in Speyer am Rhein. The origins of VETEC Ventiltechnik GmbH can be traced back to the original founding of the company in 1901. Adding a separate valve section in 1964 was the starting point for product development, whose solutions have been successfully monitored to date by our customers’ manufacturing processes. After renaming the company VETEC Ventiltechnik GmbH in 1985, this know-how continues to guide and develop the company. We have been a subsidiary of the SAMSON group - one of the leading companies for measuring and control technology - since 1988. SAMSON AG in Frankfurt am Main is the group’s parent company. By collaborating with this strong partner, we have a presence in engineering and sales offices all over the world.

Diversity, delivery reliability, quality and at an attractive price. Are you looking for a reliable supplier who can react quickly and flexibly to your wishes? And you know exactly what is important? Then we are here for you. From development and construction to the finished component, from the custom-made to the series - with us you get coordination and know-how from a single source. Because we at ANKA have many years of industry experience and have a broad network of selected metalworking companies in Turkey.

Special part production according to technical drawings as turning and milling parts. Diameter from 6 to 550 mm, lengths up to 500 mm. Milling parts up to 1000x500 mm. Surface treatments of all kinds possible, grinding work in-house with about 7 grinders. Manufacturing groups: shafts, bolts, gears and all matching parts. Almost all materials are possible. 40% of the production is for the European countries, 10% for the Arab and African countries. ISO 9001 is available.

VoTec GmbH is your reliable supplier when it comes to machining. Founded in 2011 between Osser and Großer Arber, we have specialized in the Technologies milling and turning, both as a single part and in series. Due to the continuous modernization of our machines, we have managed to present a machine park that more than meets the state of the art. For example, all lathes are automated, both with loading magazines and robot technology.

I would like to introduce our company. Our company is located in Poland. We specialize in the processing of metals and plastics. Our offer includes turning, milling, grinding, laser cutting and welding. We comprehensively carry out the entire task entrusted to the client, including designing parts from the beginning. Many years of experience of our production workers and technologists allow us to optimize processing times to the absolute minimum, which translates into low production costs with very high quality details.

WHAT SETS US APART FROM OTHERS -Long years of experience, -We are always here to meet you, -We make parts within the agreed deadlines, -We always meet deadlines, -We are flexible in contracting business. 10 years of experience. 10 years of experience makes us faster and more flexible when making different individual parts. Professional staff. Our company employs staff from mechanical engineers, mechanical technicians to operators of metalworking machines and our locksmiths. Modern equipment. We have modern tools for measuring and processing parts.