Thin sheet made to measure.

As specialists in sheet metal products we provide for industry, commerce and trade series production, small series and patterns of all kinds. Our focus is in the areas of electrical and electronics industry, mechanical engineering, environmental engineering and in the optical industry.

We manufacture custom-made, with the lowest tolerances and come join us: On your specific needs and special we can always respond flexibly. Most modern manufacturing equipment on a production area of over 3200 m2 allow us optimal and timely reactions from sketch and drawing in our design department or with your complete data sets.

The machine park.

We have a flexible and modern machinery, which enables us to implement different projects. It ranges from high-power laser systems via a stamped sheet metal machining center, CNC controlled press brakes, a fully automated bending center, wire straightening, to welding robots and manual welding processing with TIG and MAG.

Laser processing
Cope laser machining we. Onto our flatbed laser machine up to a size of 3000 x 1500 mm (steel up to a thickness of 10 mm, stainless steel up to 15 mm and aluminum up to 12 mm) The laser processing is connected to the fully automatic processing to a high-bay warehouse.

Punching
Cope in the large punching we steel up to a thickness of 4 mm, stainless steel up to 3 mm and aluminum up to 4 mm. The stamped sheet metal processing center is also connected to a fully automatic high-bay warehouse, which realizes loading and unloading.

Automatic bending work
Our fully automatic bending center with integrated Cutoption allows the edges of short-limbed profiles. The maximum bending length is 2540 mm. The maximum height of 254 mm and the maximum plate thickness 3 mm.

Manual bending work
Our only CNC controlled press brakes allow the folding of the smallest geometries up to the maximum bending length of 3100 mm, with a maximum thrust of 170 tonnes.

Judge
Our part straightener made possible by their 19 straightening rolls the production of low-tension and fine flat products. The maximum passage width is 1250 mm. The shortest leg length 100 mm, with a maximum thickness of 0.5 to 12 mm (depending on pressure).

Automatic welding processing
Our welding techniques are implemented at the TIG and MAG processes that allow us the welding of steel and aluminum. Our Nine-axis welding robot has a working range of 2500 x 1400 mm. An integrated removable turntable can position the working ranges freely through 360 degrees.

Manual welding processing
For manual welding processing, we employ a variety of welding equipment, welding tables and system. The machining on the welding table system can be realized up to a size of 3000 x 1500 mm.

Press-and Joining Technology
Our press-fit technology processes all standard self-clinching fasteners, leading manufacturers.The spot welding systems allow the joining metal sheets up to a thickness of 3 mm. Our joining technology is completed by connecting liquid form (clinching) and various riveting.

Surface treatment
For our products we offer a wide variety of types of surface finishing (eg, electroplating, powder coating, electro polishing, chrome plating, painting, silk screen) to. Through our partner companies this can be achieved quickly.

Assembly
To complete the products we carry in ...

SOMEIL is specialized in zamak 5 (z410 / zinc alloy) diecasting and electroplating treatment (nickel or chrome finishing) in-house.
We have the expertise and resources to help you from project design/mold manufacturing to the final product delivery.

We have human and material resources to assist you from the Mold design/manufactoring to delivery of the final product.

We are certified by ISO 9001 since year 2000. Currently, our Quality Management System is certified to ISO 9001:2015.

Contact us for more information.

OUR SERVICES

Pre-development and construction
- Development Consultancy for production-optimized design components
- Testing of innovative materials and manufacturing processes
- Process development and review
- Design development and construction according to specifications
- Construction services with Mechanical Desktop, Inventor and SolidWorks

Production
- Production of sample parts according to the sketch, drawing or 3D model
- Fixture and tool for proprietary and customer manufacturing
- Small-scale production
- Handling of customer parts
- CAD-CAM-program
- Assembly of mechanical, pneumatic and electrical units

Project Management
- Demand-driven manufacturing and storage
- Acquisition of planning and scheduling tasks of our customers (VMI)
- Parts management, supplier selection, procurement and coordination
- Date and Kostenkon

The ZERTEX UG was founded out of the over 30-year-old Ridder Inc. 2009. She is successful for its customers in the metalworking active. The latest manufacturing techniques and a highly qualified staff make us a competent partner in the field of machining. As an owner-managed company we set high standards for the optimum functionality and quality of our products. With excellent service, short supply and delivery times, absolute reliability and guaranteed on-time delivery, we provide now and in the future for the satisfaction of our customers.

Precision in all parts

The core competence of ZERTEX UG lies in the precision machining of parts, components and assemblies for mechanical engineering, propulsion, and control technology in nearly all industries. We reliably meet the highest expectations of our customers. We manufacture according to their drawings and specifications in cutting operations completely Mountable Products.

Whether large, small or zero series - we deliver absolute accuracy and highest quality in all parts.

Production offer
Ready-made machine parts, assemblies, pilot production, small batch, high volume,

Machining spectrum
Steel, aluminum, brass, stainless steel, plastic

Turn
24 CNC lathes (including 2 with handling systems) range of parts from Ø 10 mm to Ø 500 mm, length up to 1,500 mm

Mill
5 CNC machining centers with pallet changer and up to 100 tools - machining Dimensions: 600 x 500 x 500 mm - 1 machining center with 5 axes

Surface finishing
Hardening, tempering, electroplating,

About Spark CNC
Welcome to our company, where precision meets excellence in CNC machining services.

With our technology and experienced team, we bring your visions to life with the incomparable precision and efficiency.

At Spark CNC, we understand that every component matters. That's why we've built our reputation on delivering exceptional results that exceed our clients' expectations. As CNC machining experts, we are dedicated to providing the finest craftsmanship and attention to detail, ensuring that every project is executed to perfection.

Spiroflex Sp. z o.o., a limited-liability company, started its operations in 1994. It made its first steps in the so-called Mielec Incubator of Entrepreneurship. Since 1997, it has been active in the ‘Euro-Park Mielec’ Special Economic Zone.

The Company’s headcount is ca. 80, this being a constantly increasing number. This is so because the well-matched management style has placed the Company, ever since the beginning, at the right track leading to incessant and consistent development.

Along with development, we have managed to increase the array of products and services we manufacture and offer.

At present, we produce: - smooth, flexible acid-resistant chimney-stack insert systems, designed for disposal of combustion gases from gas/oil-fired heating units;
- round/oval-shaped heat-resistant chimney-stack inserts, designed for disposal of combustion gases from appliances solid-fuel-fired units;
- enamel stack inserts, designed to exhaust flue gases from boilers fired by solid fuels as coal and eco-pea;
- combustion gas disposal systems for boilers with closed combustion chamber;
- external insulated acid/heat-resistant chimney stacks;
- hybrid chimney stacks;
- flexible aluminium ducts;
- ventilating ducts/shapes;
- hot air distribution ducts/shapes;
- other ventilation system elements (wobblers, zinc-coated couplings, exhaust-hood passages, and the like).

Apart from our production-related offer, we invite you to use our services, including:
- powder varnishing
This service consists in lacquering of metal elements with electrostatic or triboelectric spread of thermo-hardening powder coatings. Using a modern technological line, we paint details, long elements, strips and wires. For the latter two activities, we are the only ones in Poland.
- water jet cutting
Spiroflex offers water jet cutting technology for cutting each kind of materials up to 150 mm of thickness and any shape. Working area: 7.2m x 2m, maximum height up to 200mm.
- laser cutting
We provide sheet-metal cutting services using an LVD-made most-recent-generation contour band saw. High performance linear motor delivers high-speed cutting for fast, continuous processing of high quality parts.
- sheet-metal bending
We bend sheet metal, using a CNC-controlled bending machine or most modern CNC brake press. The maximum length of elements bent are up to 3m long, the sheet being up to 12mm thick as a maximum.

The SPL Precision Manufacturing Ltd. manufactures high-precision parts for industry. Special emphasis is on the production of components for main spindles of machine tools.

When turning, milling, drilling and grinding of shafts (with HSK, SK or short taper), housings, cooling sleeves and end shields are modern CNC machines, such as the "C30U" Hermle AG for the 5-axis milling and the "KEL- VIVA "from Kellenberger for the external and internal cylindrical grinding to use.

Our corporate objective is to achieve the greatest customer benefit. Benefits means the best possible advice and planning for the customer as well as the production of rotary and cubic components at competitive prices with absolute top quality for us.

The company offers comprehensive manufacturing capabilities in various mechanical fields
, such as:
- CNC mill with a working area of 1,020 x 600 x 600 mm
- CNC turning with a diameter range of 1-200 mm and a turning length of 600 mm
- CNC wire cutting with a working area of 500 x 350 x 400 mm and a wire thickness from 0.2 mm
- Surface grinding with a working area of 600 x 400 x 322 mm and an accuracy of 0.001 mm

The production include also all the needs of precision mechanics for the metalworking industry. Due to the very low operating costs In addition to the machine-hour rates are extremely low. Due to the great depth of production sprinklers tooling AG can offer a comprehensive selection of production considerably lower prices than that of the competition.

A collaboration can take place at different levels. Be it to break production peaks or outsource complete manufacturing steps. This requires flexible, cost-effective and competent partners like the Sprenger AG tooling that performs this production steps.

Springfix stands for modern forming technology and machining in large and medium volume production. We supply parts to component suppliers to the automobile, building equipment and electrical industries world-wide. We react flexibly and quickly to our customers’ requests. We view ourselves as being in a dynamic process in which products and services are continuously being developed and improved. Our understanding of "Swiss made" goes far beyond technical reliability.

Our modern and material-efficient technology portfolio includes
- Demanding conventional stamping up to 4000kN
- Re-passing for contour regions of fine blanked parts
- Processing of brushed and finished surfaces
- Centrifugal and vibratory finishing
- Surface degreasing and refining processes
- Picking

Structured, well documented processes and the latest generation in resource planning tools ensure a precise production process, essential in a multi-shift business.

Our task is not completed with the simple production of your parts. To us, on-time delivery and customer satisfaction are more than just the icing on the cake – they are the basis of the type of customer service we envisage.

And we offer the logistics standard of today and tomorrow:
- Delivery schedules
- WebEDI
- Vendor Managed Inventory
- E-Dec