The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The company Brünink-Neuenhauser Metallbau was founded in 1953 by the master blacksmith Albertus Brünink. Today the company is run by the second generation of the son of the founder, Bernd-Heinz Brünink.
The company Brünink is a family tradition and its own production.

Production services in metal processing.
High production depth of sheet metal processing machine cutting over to the state of the art coating.

Company NIHO MOTORS d.o.o. Konjic processes metal by chucking on automatic lathe and it is specialized in mass production.

In its program it has production line of brake pads for passenger, vans and SUVs.

Two decades of experience, and significant production program confirm the effectiveness and quality of work.

We are a young and dynamic company and offer sandblasting and powder coating.

The NIKRO group of companies consists of 3 companies.
• NIKRO GmbH in Marxen, founded in 1989 with approx. 30,000 m² of warehouse and hall space.
• NIKRO GmbH in Radeburg, founded in 2008 with approx. 28,000 m² of hall and production space
• NIKRO Surface Technology GmbH, Radeburg
The company NIKRO GmbH in Radeburg is a versatile and high-performance contract manufacturer for steel or metal processing. Our specialist staff manufactures sheet metal parts, welded constructions and bent parts according to your specifications, but also railings, steel stairs, stands, half-timbered structures and extensive steel components in our factory in Radeburg.
Individual and special constructions as well as individual and mass production are possible. We manufacture individual parts that are required for welding assemblies in-house. This option saves additional transport routes and is quick and economical.
We have extensive experience in the field of cutting, edge welding and painting of components made of steel or stainless steel. With our modern laser and flame cutting systems, drilling and sawing machines and CNC systems, we manufacture your components quickly and precisely.

NL-Maschinenbauelemente GmbH manufactures various components on 3 and 5 axis machining centers as well as turning centers.

The company Norbert Sapp is a medium-sized company with about 30 employees and is currently in its 3rd Generation of a family business.

In addition to configuring systems for surface treatment (pre-treatment equipment, dryers, conveyors) is the "2.Standbein" the company steel construction, steel and welding constructions, general sheet metal processing and manufacturing of machine frames and housings. These are produced both by customers drawings also constructed 4 CAD work to customer specification and manufactured inexpensively.

Our Performance:
 cutting up to 12 mm thickness and 4000 mm length
 CNC - folding up to 4000 mm length and 300 tons
 CNC - Fine beam plasma cutting up to 6000 x 2000 x 15 mm
 CNC - oxy-fuel cutting up to 6000 x 2000 x 200 mm
 CNC - Punching 3000 x 1500 mm
 Turn Around 3000 x 6 mm
 procedure test all common welding processes
 specialist authorization according to § 19 WHG with monitoring contract with the TÜV-Nord
 Small Verification of suitability in accordance with DIN 18800

Our product range:
 steel construction
 welded constructions of all kinds of steel, stainless steel and aluminum
 piece weights up to 15 tons
 CNC stamping parts
 Complete assemblies including mech. Processing
 machine frames and housings
 General sheet metal processing, profiles, flashings
 Surface-coated components
 assembly work

For over 20 years, Nordform, a company from South Tyrol (Italy), has specialized in sheet metal processing, powder coating, the production of steel frames, and professional pre-assembly. Our commitment to the production of high-quality products forms the foundation and distinctive hallmark of our business.

Our goal is to provide a personalized consulting service led by an experienced team, focused on understanding and satisfying customer needs. This personalized consultation accompanies the entire ordering process, ensuring a tailored partnership that represents the core of our comprehensive approach to solution development.

From the initial concept phase to the pre-assembly of components, we oversee the entire work process. Reliability and efficiency are central elements of our philosophy, contributing to ensuring your satisfaction.

Thanks to state-of-the-art, fully automated technologies, we successfully manage not only large order volumes but also guarantee the highest quality, even in the production of unique pieces.

We are not just suppliers but committed partners dedicated to offering high-quality solutions in steel and sheet metal.

The company Nordia GmbH & Co. KG is a manufacturing facility for the machining of thin sheets. We mainly steel, stainless steel and aluminum in sheet thicknesses from 0.2 to 6.0 mm.

The corporate structure is dedicated to the construction of prototypes and small series for the industry. The company is set up so that it can provide a complete manufacturing and service package for complex and customized design solutions in high quality and on-time delivery to its customers.

In addition, we have our own design department, which your requests (sheet) designed with production requirements on the CAD system Solid Edge.

Our product range includes:

* 3D design
* Redesign, ready for production
* Lasers
* Punching
* Bending
* Welding, aluminum welding
* Cut thread
* Powder coating
* Screen Printing
* Foil lettering

We process the following materials:

* Steel, 1.0330, St37, St57, structural steel, S235JRG2, DC01, zinc plated
* Stainless steel, V2A, V4A, 1.4301, 1.4571, polished, with film
* Spring steel, 1.4310
* Aluminum, 3.3535, AIMg3 anodized,
* Perforated sheet

By external partners, we can supplement our production capabilities as follows:

* Galvanic / Surface coating
* Machining
* Manufacting Blechdesign

Nordic Titanium is a manufacturing company with a factory located in industrial center of Narva, Estonia. Our products are manufactured from different grades of titanium, steel and plastic. To ensure quality of products we use only certified raw material.
Our factory is specializing in manufacturing different categories of products, such as automotive, aerospace, marine, sporting,
medical industry and other industrial types of products that always meet the needs of customer, technical
specifications and quality requirements.
With the flexibility of our manufacturing, the experience of our employees, and the constant investment into new technologies, we can offer our partners high-quality components at competitive prices. We are able to manufacture one-offs, low volume series and mass production items. The Nordic Titanium engineering and development team support the manufacturing process from the start of production and up to delivery to the customer including all enclosed documents, 3D models, technical drawings, assemblies etc.

We supply semi-finished goods, functional assemblies, product components, or finished metal goods to our customers' designs. We manage everything from engineering to delivery while providing all associated services, from directing the upstream supply chain to downstream logistics.

Our aim is to achieve excellence in our market segment, specializing in production processes with a high subjective contribution and based on a skilled and strongly motivated staff applying the best available technologies.