Discover specialized suppliers for deep drawing on Techpilot. Our platform connects buyers with suppliers who use advanced technologies to create high-quality deep-drawn products. Use the e-sourcing process to find suitable suppliers in real time.
Founded
2017
Employees
500 - 1000
Certifications
Schwanewede
Germany - 28790
Perforated products
standard and taylormade
Founded
1992
Employees
20 - 50
Certifications
GENAS Cedex
France - 69745
http://www.bgpolis.eu/index.php?tab=4&lg=en&id=1090
Repair Machine Shop In Vratsa Bulgaria
Development, design, manufacture, repair, installation and dismantling of vessels and pressure equipment, heat exchanger
equipment, pipes, pipelines, steel structures for the chemical, petrochemical, metallurgy, food
industry, energy and construction.
1. Repair and reconstruction of: vessels under pressure.
Pipelines for steam and hot water. Steam and hot water boilers, except boilers. oil and
oil product pipelines. Steel distribution lines and equipments to them and steel industry and building gas
natural gas plants. Steel gas saorazhenich and systems for liquefied carbon gases. hoisting
cranes and tracks them, hoists, lifting bodies and removable lifting accessories
2. Keeping hoists and bridge and gantry cranes and tracks them.
Founded
1965
Employees
50 - 100
Certifications
Vratza
Bulgaria - 3000
Founded
Employees
50 - 100
Certifications
Waldbüttelbrunn
Germany - 97297
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Our production spectrum ranges from locksmith products such as railings, machine and sheet metal parts to steel construction and special constructions of every kind. EN1090 to EXC2 is available.
In addition to the production and assembly of steel and metal construction products, we can also undertake the complete planning and structural analysis of your design.
Founded
1982
Employees
5 - 10
Certifications
Reichshof
Germany - 51580
Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.
Founded
2009
Employees
20 - 50
Certifications
Krakau
Poland - 30-389
The Roti GmbH & Co KG supplies series products from metal and plastic.
Customers are advised in the implementation and necessary resources
designed in house and built.
Founded
2003
Employees
5 - 10
Certifications
Herford
Germany - 32051
Founded
Employees
Certifications
Lövő
Hungary - 9461
'We are a small company that specializes in processing sheet metal using plasma cutting processes. This is implemented by a new, modern CNC-controlled PlasmaCut system with a Hypertherm plasma torch. Hypertherm is the market leader among plasma devices, which is why we can produce very good cut qualities (mild steel even up to 30mm!).
Founded
2021
Employees
< 5
Certifications
Erdweg
Germany - 85253
Founded
Employees
5 - 10
Certifications
Zreče
Slovenia - 3214
With a wide range production equipment, Sadev Group is able to quickly meet your requirements in small, medium and large batches, in any material.
A one-stop supplier for precision turned components
One single partner to rationalise your purchasing
Service in LCC (China, Hong Kong, Eastern Europe…)
Worldwide delivery covering all industrial sectors
Controls & Quality Assurance (ISO 9001, AMDEC & PPAP process …)
Founded
1938
Employees
10 - 20
Certifications
Seynod
France - 74600
For more than 50 years working in the metal forming and we have on us
rototypen near-series P and K leinserien specialized.
In the production areas deep drawing, stamping, bending, laser cutting and pressing we are
For many companies, the competent partner. Flexibility, speed and a very high
Level of quality you expect from us. With tailor-made concepts, we fit
us to suit your individual needs.
You have found a powerful tool shop with CNC machines,
according to the latest state of the art was designed and is constantly evolving.
This allows us precise single parts and small series in the field of turning, milling,
To manufacture flat grinding and wire EDM.
The use of modern technology CAD / CAM also provides economic benefits.
We edit External CAD data in IGES, STEP and DXF formats.
Founded
1957
Employees
20 - 50
Certifications
Schwäbisch Gmünd
Germany - 73529
SAKARYA IRON AND METAL Since 2001 in Sakarya; quality by keeping customer, employee and supplier satisfaction at the highest level
has adopted to offer products and services in accordance with the standards. In this direction, it provides continuity and reliability for its customers, employees and suppliers.
Our main goal is to be an institution that prefers society and the environment. Making a difference for our customers, meeting their expectations from us
Our basic principle is to respond with the quality of our products, employees and services.
Founded
Employees
20 - 50
Certifications
SAKARYA
Turkey - 54200
Founded
Employees
20 - 50
Certifications
Legnica
Poland - 59-220
Industrial Brokerage - Mechanical cutting / stamping, tooling.
Founded
1982
Employees
< 5
Certifications
ETUPES CEDEX
France - 25461
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
SARL Mouneyrac specializes in the design and manufacture of tooling
- Tools to follow;
- Tools Switzerland;
- Parisian Tools;
- Tools for recovery;
-> Hydraulic Press up to 250 tonnes.
-> Press Mechanics up to 300 tonnes.
Founded
1999
Employees
5 - 10
Certifications
LA FEUILLADE
France - 24120
Familial company near BESANCON - at the border of Switzerland - 50 persons
With more 30 years of experience, MECA-PRECIS is specialized in cutting- stamping on presses (50 to 1000 T), small and large series.
MECAPRECIS is also specialized in highly technic tools.
Certified by ISO 9001- year 2008, MECA-PRECIS works for automotive industry, building material, electromechanical engineering and electrical good industry.
Founded
1978
Employees
20 - 50
Certifications
PIREY
France - 25480
Consultancy, prototypes and series parts
For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization.
As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ².
Articles of our production, please refer to:
Air springs,
Metal rubber elements
Vibration elements,
Hydrobearings,
Chassis suspensions,
Motor bearings and
Machinery bearings.
Our range includes:
Butted and clinched rings as a substitute for pipe sections,
Support rings,
Reinforcement rings,
Pole plates and flywheels for the electrical industry and
Fußkufen for the furniture industry
The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008.
We look forward to your inquiry.
Founded
1954
Employees
20 - 50
Certifications
Delmenhorst
Germany - 27755
The Saxonia Precious Metals GmbH is since the beginning of the 17th Century in the Freiberg region existing tradition of mining and processing of precious metals continues.
Already in 1612 the "hut on the Halsbrücker Spat" was founded.
1663 "Halsbrücker smelter" by the Saxon Elector was taken. Later it was renamed the "Royal smelter".
1861, it was then launched the gold refinery neck bridge.
Today, presents former subsidiary of Deutsche Nickel AG Technology Group in the core areas of precious metal recycling and processing as a recognized and reliable partner of the user industry. Modern and environmentally sound facilities, innovative products, motivated and experienced staff and a quality management system according to DIN EN ISO 9001-2000 document the performance and competitiveness of the company.
The Saxonia Holding consists of four manufacturing companies at two locations in Germany.
At the site Halsbrücke about 200 employees, and at the Pforzheim location employs about 150 workers.
Products from precious metals: Semi-finished products, chemicals, recycling, contact and parts
Alloys: Ag, Au, Pd, Pt, Rh, Re, Ir + base metals Cu, In, Ni, including
- Round wires
- Flat and profiled wires (after drawing)
- Rods and tubes
- Sheet and strip
- Targets
- Anodes and salts
- Weld-on and Auflötkontakte
- Assembled contact parts, welded, soldered or riveted design
- Contact bimetals (deposit and support profile semis)
Founded
-
Employees
500 - 1000
Certifications
Halsbrücke
Germany - 09633
Founded
Employees
50 - 100
Certifications
Orlova
Czech Republic - 73514
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
Deep-drawing is a part of Sheet metal processing and the most important forming method for the production of sheet metal parts. According to the definition of DIN 8584, it is tensile compressive forming and the processing is carried out by simultaneous tensile and compressive stress in different operating directions. The drawing method most commonly used is deep-drawing with rigid tools from tool making. The tools consist of a punch, a die and a sheet holder. The sheet metal blank is fixed by the sheet holder and during immersion the stamp spans the sheet in the board across the die radius, pressing it into the die (also called drawing ring). In doing so, the required punch force constantly increases until the dead-centre position is reached. The edges of the punch and the die are rounded, otherwise the sheet might tear. If the roundings are too large, the sheet at the end of the draw can no longer be fixed by the downholder, which may lead to wrinkling. If the draw depth is not reached in a single step, the draw is executed in several steps, especially in case of thick sheet metals.
