For decades we have known in the market as an efficient producer of precision turned parts and established.



We see ourselves as a service provider and want to provide our customers with lasting benefits.



We achieve this through continuous investment in the latest equipment, through training of our qualified Mitdenkarbeiter and close cooperation with our partners - from the first sketches to prototypes to series production.



Customer orientation, trust and transparency are the basis of our actions.



We are a middle class family and our thoughts and actions are guided by a long-term, socially and economically fair strategy.



Advancement through technology and service

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts.

Our focus:
- Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the
Machine transport
- Furnace construction: oil, gas and coal dust burners (also combined) and their components such as
Standby lances, nozzles, swirl chambers (also in armored versions) etc.
- Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts)
- Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t

Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work.

What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride:

"A strong team works miracles" and MADE IN GERMANY

We see ourselves as a modern craft business that dares to balance industrial efficiency and craftsmanship in times of high industrialization. We would like to offer you individual solutions to your problems and are always looking forward to new challenges.

Our customers come from the fields of vacuum coating technology, medical technology, measurement technology, and handling system technology.
We are also happy to turn, mill, weld and assemble individual parts and small series for you.

Womet is a Polish company operating in the metal industry since 2004. The basis of our activity are accessories and devices for the energy, construction, agricultural and shipbuilding industries.

The dynamic development of the company has influenced the expansion of our production and service activities, thanks to which we significantly stand out from the background of Polish producers.

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.

We are a company founded in 1998 with three employees.

We manufacture montage mature Präzisionsdrehteile from 3 mm to 65 mm in diameter after drawing our customers very latest CNC long and short lathes.

Sample parts up to large series, and very fast determination of additional capacity lathes purchase for customized turned parts.



We work on:

We machine vending machine, use, construction and heat-treated steels, stainless and acid resistant steels, high speed steels, brass, copper, bronze and aluminum.

11SMn30 + C or Pb, C45, C15, ETG100, S235JRG2C
1.4301,1.4305., 1.4104,1.4404,1.4571,1.4567,
AlMg 0.5 Si (1), AlCuMgPb;
CuZn39Pb3 (MS58) and others

We manufacture according to drawings or samples.

Our know-how, quality, flexibility and punctuality are our strengths.
Our product range extends from bushings, rings, plugs, sleeves, piston, pipes, among others Kunstoffdüsen

Surface treatment such as electroplating or curing complete our performance.

We undertake the assembly of new systems incl. Media connections, de-remontage, maintenance and service, conversion work, retrofit, welding work E / MAG / TIG. Modifications.
Position of construction management and assembly personnel. Our staff is equipped with journeys, staff, as well as crane certificates and current welding certificates.

TOKARMET deals in the production of metal elements by machining on CNC lathes and mills.
Highly qualified staff and years of experience in the field of machining makes us one of the most reliable companies in the region. We specialize in the production of parts, subassemblies and components for industrial automation, hydraulics and the gas industry. We are currently looking for regular customers in Western Europe. I would like to invite you to cooperation.

Witold Piasecki - (owner)

Company ZUT "PROJEKT" offers services in:
Processing of metal - milling, turning, Inen and outer grinding, Surface grinding, cutting, welding - steel, aluminum, stainless steel,
Engineering, manufacturing spare parts and machine elements

We offer:
- Turning
- Automatic turning (bar)
- Hard roes
- Milling
- ....
etc.

We are a powerful, medium-sized company,
which has proven its flexibility and effectiveness in the market.

Our main task consists in the precise drawing and fair manufacturing
of items, but also small and medium series production, or to model part.

Our machinery with modern CNC lathes and milling machines,
allows us inexpensive and above all to produce individually according to the wishes of our customers.


CNC - machining

Turn of short rods to 65mm diameter
Chuck parts up to diameter max. 300mm
Shaft machining max. 1000mm length
CNC - Milling 1000 x 500 x 500 + 4 Axis

Conventional machining

Turning diameter up to max. 400mm and Länge1900mm
External cylindrical grinding up to diameter 200mm length 650mm
Miter
Drills


We handle a wide variety of materials metals and non-ferrous metals
Copper
Aluminum
Stainless steel
Steel

The company has two production sectors:


The first - the production standard in the field of electronics, electrical engineering and automation. We develop, manufacture and market the following products: rotary encoder (incremental and absolute), Hallefekt sensors, inclination measurement sensors, pressure sensors, magnetic encoders, equipment for induction heating, vibrating conveyor and linear conveyors, power-claw and Bellows, Prezisions membrane and Bellows.


The second direction is the production of individual parts and assemblies for specific customer requests. We offer the following finishing operations: turning, milling, drilling, grinding, sawing, hardening, Brühnieren, bending, stamping, welding, sandblasting, powder coating, marking, electroplating, powder coating, chrome plating, zinc plating, nickel plating, anodizing, pressing, rolling, pouring, Installation of electrical engineering and fine electronics among others

We process: steel, stainless steel, cast iron, cast iron, plastic, rubber, copper, brass, aluminum anda


Our performance in machining of the parts are as follows:


 machining of rotational parts on CNC machines. Maximum AbmessungØ200, L = 200 mm

 machining of prismatic parts with CNC machines. Maximum Abmessung300 mm x 300 mm x 200

 Universal turning operations of rotary parts from bar stock up to Ø60 mm blank piece with maximum dimensions Ø315 mm.

 Universalfräsoperationen of parts with maximum dimensions 1000 mm x 500 mm

 Precise milling with dimensions 320 mm х 320 mm х 320 mm

 grinding operations: surface n, surfaces with dimensions 600 mm х 250 mm, external cylindrical grinding up to Ø150 mm L = 300 mm, internal cylindrical grinding up to Ø60 mm L = 60 mm

 Drilling and locksmith operations of parts and assemblies

 stamping parts with eccentric press

 punching and bending of sheet metal parts with programmable punch - thickness of the material max.3 mm.

1TECOplast - We are manufacturing partners for semi-finished and finished parts of plastics precision elements in many sectors and areas of the industry. We handle your needs of technical plastics parts quite individually, based on drawings or samples, using CNC controlled production machines and CAD-CAM assistance.

1TECOplast - Backing is provided by lean and economical structures. Optimized manufacturing methods enable us to produce "prototypes, small batches and series in numbers of thousands". We supply the specialty products meeting the high measurable standards of quality and precision, flexibly, economically and with dependable precision. This is warranted by the expertise of our staff.

1TECOplast - We process all thermoplastic synthetics available on the market of semi-finished parts, such as PE, PP, PVC, PA, PSU, POM, PVDF, PEEK, PMMA, PTFE, plus all other high-performance plastics, as well as fibrous plastics in all cutting methods. We are absolutely familiar with the assembly of structural components, as well as the bonding, joining and welding of containers, modules and pipes.

1TECOplast - Our quality management is orientated at customer requirements and has been certified since the year 2000 according to the standard of DIN EN ISO 9001:2008. Our business policy is strictly following the customers' demands with regard to service, quality, competitiveness and customer satisfaction.

We have found our market niche in supporting medium-sized tool workshops, for which we manufacture framework tool plates. We understand our clients and know that they expect quality production and on-time delivery. What we agree with our clients, we fulfil, and never deviate. We are increasing the number of our loyal clients with every year and retain all of them, thus ensuring successful growth.

We collaborate with partners mostly from the automotive industry, with some partners manufacturing tools for household appliances. Occasionally, our services are sought by tool manufacturers that need components for machine manufacture.

Our principal activity is CNC machining according to plans submitted by our clients. We manufacture tools for pressure casting, tools for thermoplastic injection moulding, remodelling tools, press brakes, and attachment assemblies. The range of services we provide spans cutting, milling, deep drilling, and 5-axis machining. We provide all this in one location, without any need to look for other providers, in order to save time of delivery.

CNC machining is our most expanded activity, for which we have the most machine capacities available. We manufacture plates from dimensions of 300×300 mm to 2000×1500 mm. The weight of the workpiece is limited to 10 tonnes. We offer complete CNC machining and after-treatment – plate repairs due to construction changes. Our products are made to final measurements and tolerances according to our clients’ requests, in accordance with plans received.

Our range of services also includes deep-hole drilling. Deep-hole drilling is becoming indispensable in manufacture of tool plates, as such products are becoming increasingly technologically advanced. Plates have ever more cooling channels, which must often be drilled at an angle. We provide deep-hole drilling from a diameter of 4 mm to 22 mm, and one-sided drilling up to a depth of 1000 mm.

More complex machining and drilling and cavities under angles are machined using the 5-axis machining centres, as only such centres allow us to best achieve the required precisely defined tolerances. In terms of size, we can provide machining up to dimension of 1600×1600 mm, with the workpiece weight of up to 10 tonnes.

My company was founded in 2021, our main activity is CNC turning and milling, but we also do laser cutting and 3D printing.

Welcome to 3D Path CNC .
We are a leading provider of CNC
machining services for a wide range of
industries including; automotive, medical,
communication, renewable energy, agriculture
and more. Our state-of-the-art facility is
equipped with the latest CNC machines and
technologies, enabling us to provide precision
parts and components with exceptional
accuracy and speed. The company has grown
organically in Poland based on the experience
of our engineers acquired working for top
industry leaders the UK, Germany and Norway. Having made a significant investment in
our machine park we are now looking to expand to different European markets.

3MÜ offers you CNC-precision technology for complex machined parts at high levels of precision. On our CNC-lathe and milling centers we manufacture your parts as single pieces, and as small batches up to larger assemblies. For your individual wishes we are well equipped with modern and partially 7-axis guided machines.

The company 3MÜ is a privately held family business and has profited from 20 years of experience in the field of milling. Nowadays we do our work on site in Möglingen with over 30 knowledgeable, competent employees in two manufacturing halls. We guarantee competent advice, high quality, and additionally fast and punctual delivery times. Although our main focus is regional, we also deliver within the Americas and Asia.

In two production halls our competent workers develop your parts at the highest quality standards. The fully automated machinery works at all hours. Our machinery outfit includes 20 of the most modern machines and offers you 7-axis CNC-milling and lathe centers with up to 110 tools.