The company August Feldmann, was founded in 1937 as Lohndreherei for castings in Velbert, then the center of the German foundry industry. In the economic boom years of the establishment of a comprehensive standard parts program for the commercial vehicle, agricultural machinery and automotive industry began.



The high manufacturing quality and in particular the ability to create short-term solutions for individual requirements by technical advancements have led to close ties with customers - outside of Germany. So, for example, twisted clevises developed as a replacement for the much more expensive forged copies of the late 50s into an export success.



1972 & Co. KG was the transformation take place in a limited company. Partner is the August Feldmann GmbH. The limited partnership is 100 percent family owned. The management is responsible since 1995 Dipl.-Ing. Christian Feldmann.

Portrait of the company Felker Drehtechnik

The company Felker rotation technique was founded by Mr. Gerhard Felker and his wife Verica Felker as a pure contract manufacturing companies in D-89610 Oberdischingen in December 2004.

The range consists mainly in the manufacture of automatic lathe parts (valve seats, valve pistons, valves, anchors, piston, pin, spring plate, lathe parts, micro turned parts, micro-turning), made of steel such as 9S Mn Pb 28K, 16 Mn Cr5 C 45, 42 Cr Mo4 Stainless steel to 1.4301, 1.4305, 1.4105 (X6Cr Mo S17), cast iron, aluminum (Al Mg Si) and brass (to Zn 39 Pb) on 9 Tornos AS 14 six-spindle automatic lathes up to Ø 14 and an additional plastic on a Star lathes up to Ø 16 in Central series and large series from a lot size of 20,000 or 5,000 units at long lathe.

Besides this installation work, Nachdreharbeiten and Deburring and Aussuch or testing work of rotary parts of all kinds are carried out.

Our strength lies in the flexibility of the company.An absolutely smooth cooperation among the employees as well as with senior management and the customer ensures virtually zero defect deliveries.

We endeavor to expand and consolidate its above-average quality, our previous successful and trusting relationship with our customers.

Our goal is to provide systematic improvement in quality and on time delivery to satisfy the customer and implement its requirements given us 100% error-free and at a reasonable cost. We are certified according to DIN EN ISO 9001:2000 and reject ourselves to the standard DIN ISO TS 16949.

Be able to work more efficiently in addition to three of these aircraft were purchased, which have been found in our new premises good place.

The new building has a production area with warehouse and office of approximately 1000 m², as well as buildings for more than one employee / inside of about 170 m².

Our production capabilities:
- CNC turning and milling center for complex machining
Thread rolls / rooms / sandblasting
- Grinding (centerless, cylindrical and surface grinding)
- Deep-hole drilling

Our strengths:
- Quality
- Advice and support of our customers
- Solution orientation
- Extensive experience - broad know-how
- Fast project implementation thanks flexiebler applications
- Manufacture of complex parts
- Modern machinery
- Environmentally sound management of all processes

Supplier for series parts with metal-cutting CNC machining centers with revision 3/4/5 axis machines.
Lathes with sub-spindle and driven tools
Series sizes 1-100000
Prototype housing from the solid material
Assembly including packaging

We are the leading manufacturer of manual and fully automatic operating

Multispindle Drilling and Grinding Machines for Brake linings and Clutch facings

For more than 50 years our products have been valued by the major friction material producers world-wide.

The company has been founded in 1955 by the Engineer Ferdinand Erlmann. Due to his former activities he had best contacts to the Brake Lining and Clutch Facing Industry in Germany so that he could get a good overlook of their requirements.

He developed efficient production technology for drilling of brake linings and clutch facings. To fulfil the demand of our customers he designed as well Hand Drilling Jigs for a low production rate as automatically working machines for economic drilling of big runs.

In 1972 Ferdinand Erlmann incorporated a partnership with Rolf Stratmann and in 1987 he retired. Rolf Stratmann assumes the complete participations. 2007, 65 years old, he assigned the company to
Dipl. Ing. Gerd Schorn and he continue the business.

Beside of our standard machinery program several special purpose machines have been built according to the requirements of our clients. Our Engineering department persistently develops the machines with high-precision components according to the newest technology. The requested quality regulations for the original equipment of the most important motorcar and axle producers as DAIMLER CHRYSLER, VW, GENERAL MOTORS, DAF, DANA, BERGISCHE ACHSEN, MAN, MERITOR, ROCKWELL, SCANIA, FRUEHAUF, LEYLAND, VOLVO, PEGASO, KAESSBOHRER, IVECO a. s. o. will be completely fulfilled.

As producer of high quality machinery on a small and specialised market a personalised service to our customers is the first priority for us.

Since our founding in 1991, we deal with the development and production of customized tasks in the fields of precision engineering and mechanical engineering.

The satisfaction of our customers is our top priority, every order is done carefully and reliably. All parts, assemblies and equipment left from our production tested and ready to use our house.

Through good and lean organization, from order to delivery, even the smallest orders are processed economically and in high quality. The economic processes we manage through our inventory management system, the business processes of our management system. Certified to EN 9100:2018 included DIN EN ISO 9001: 2015.

Meanwhile we finished with over 100 employees in Germany and Poland.

We develop and design complete units of the detail drawing up to all associated documentation for the end user. If necessary, use specified or statutory approvals for the product.

With our extensive range of machinery we manufacture items from almost all machinable materials, such as aluminum, brass, steel, stainless steel and plastic. On request with initial sampling and measurement protocol.

In modern, well-kept rooms and rich feature set we assemble sophisticated components and devices. Also available with inspection report.

We carry materials planning, procurement and storage through to our customers.

For almost all pre-and post processing are we capable suppliers to the side with whom we have long-standing business contacts. This allows us to offer additional surface treatment, welding and heat treatments.




The options listed in the tab are the summary of the entire spectrum in Germany and Poland.

Ferhat Karahatil Maschinenbau manufactures machine parts and components in various materials.
Our core business is prototypes, individual and series parts with a diameter of 1 mm to 100 mm and a maximum length of 300 mm.
Other processes and sizes can be implemented with partner companies.

Our company has specialized in the processing of simple to complex parts.
You can expect products with high precision. Your demands determine the quality of our work.

We would be happy to advise you in a non-binding discussion. We are at your side from the planning to the construction phase.

imprint
According to § 5 TMG
Ferhat Karahatil
Ferhat Karahatil mechanical engineering
At the craft center 1
A3
52156 Monschau-Imgenbroich

Details of the liability insurer:
Allianz Insurance AG
No .: AS-9235662119

Contact:
Phone: 015228401131
Email: f.karahatil@gmx.de
Sales tax ID Sales tax identification number in accordance with Section 27 a of the Sales Tax Act: DE 335264528

FERRERO MECCANICA DI PRECISIONE has been carrying out precision mechanical work for many years, manufacturing made-to-measure parts and components, starting from the customer's drawing or developing the eingineering and design on his behalf.
Experience, precision mechanics and the use of state-of-the-art machinery define our high working standard throughout the complete cycle dealing with clients: from the production of customised parts in small series to the construction of complete machines and equipment.
MILLING, TURNING, MECHANICAL ASSEMBLY, MACHINE RETROFITTING, 3D PRINTING

The mission of our company is to provide a manufacturing facility with the capabilities of performing custom precision machining and production component manufacture work in prototype and production quantities while offering the latest in machining and fabricating techniques.

It is our policy to be the cutting edge in high precision machining and deliver products and services that meet or exceed our customer's expectations. We would be pleased to quote your fabricating and machining requirements.

AUTOMAC is your partner for innovative and reliable solutions in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet and in the field of contract manufacturing.

We ensure that you get technically perfect equipment so that you can produce cost-effective and reliable.

The benefits for you

● Design according to customer services.
● Maintained and tested machinery and equipment.
● Competent advice.
● Cost produce by cheaper investment.
● products with high quality standards.
● Meeting promptly manufacture of our products.
● Installation, maintenance, commissioning and service

Services

for the end user:

● Design according to customer services
● Plant
● Steel Construction
● Welding
● Samples and Sonderbau
● serial production
● cooperation in product development

Contract Manufacturing:

● Turning, milling and drilling
● installation work
● welded assemblies
● coloring

NEW! Flame cutting Service / burnouts plasma / oxy fuel cutting machine up to 150 mm thickness.
Work table 6000 x 2000 mm Plasmamakieren, plasma graining possible.
Welded assemblies, welding technology Reparaurdienst.
Sandblasting of the modules / burnouts! Large suitability proof!

Cabinet:

We design, build and install cabinet systems in different designs according to the specific requirements and operating standards of their customers from the mechanical engineering and plant construction.
The spectrum ranges from small control panels or panel to the simple cabinet to large cabinet lines - from the PC cabinet enclosures for up to big benefits.
All procedures during project planning and production are subject to continuous quality control.
Each cabinet is tested prior to delivery in accordance with the relevant national and international standards and wired to desire location worldwide and put into operation.

Our products

As a provider in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet, we offer a wide range of products and services.

The products listed below are representative examples of our product portfolio dar.
We develop customized solutions for you. Talk to us!

● Plant for the precast concrete industry
● conveyor and picking
● Milling Machines
● Handling Systems
● Lift Tables
● Storage Systems
● Presses
● Test Stands
● Welding and special devices
● Heavy load handling equipment (cranes)
● Vacuum lifting equipment
● Separation systems
● equipment for foundries
● Wrappers
● Special Machines
● Steel Construction
● Contract Manufacturing
● Service Services
● Control cabinet

The Ferrum GmbH has specialized in the manufacture of arched halls of curved elements in grid construction (steel tubes). In addition, the fabrication of single-tube and tie frame and custom designs in small and large series.

In all questions of statics and construction, our customers can rely on the experience and the high level of training of our structural engineers, designers, and welding engineers. Perform all statistical calculations for the construction of a hall and monitor each production step strictly in accordance with DIN EN ISO 9001:2008 and EN 1090 - EXC2.

The orders will be executed in multiple shift operation of a total of 50 production staff. About the manufacture of arched halls addition, we do on request, almost all other jobs in steel construction. We also guarantee this high manufacturing quality at reasonable prices.

Translation by Google Translate

Contract manufacturing assembly modules

• CNC manufacturing for the industry as well as for the private sector
• Integrated solutions
• Detailed implementation of your requirements
• Production of precision parts at low rates
• Fast, uncomplicated order processing

We manufacture machined parts vertically in dimensions up to 2000mm length and 1000mm width
On horizontal machining centers with 800mm round table, 1250mm length 1600 and width
Turned parts, we manufacture up to Ø 350x1000mm Length

Our focus on the editing part:

Castings such as: slides for Werkzeugmschinen, machine stand, motor housing
Schweißkontruktionen such as gearbox and various parts for machine
and construction equipment businesses.
Aluminum parts for automotive and automation technology
3-D shape milling in the field of tool and Desing
Workpieces for fixtures and equipment such as pump housings and impellers

Manufacturing equipment GmbH

... has stood for precision in the development and manufacture of highly specialized production equipment for all industrial sectors since 1991. Together with a strong team we guarantee with our name the highest precision in the development and construction of our products.

At the Stenn location, in the traditional industrial region of Zwickau in western Saxony, we at FMB work with over 30 employees for customers in mechanical engineering, the automotive industry and for various suppliers to these industries across Europe.

We develop concepts and solutions for the optimization of production and assembly processes and design the devices and tools for these processes and their auxiliary processes.

In addition to our own developments, we also manufacture according to individual customer specifications, from sketched designs to individual 3D models.