As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components.

The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source.
By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer.
Thanks to a high degree of automation, we can offer you particularly competitive prices.

We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements.

We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase.
We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes.
Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding.

It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality.

We would be pleased if you contact us.

categories:
Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts;

Imprint: https://www.friedrich-joerg.com/kontakt/impressum/
Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/

CNC: 5-axis milling, turning, wire EDM
///prototypes + series
special devices
///Design + Construction + Manufacturing

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland)
Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

Medium-sized company near Chemnitz (Germany)

Products:
Sheet metal parts and components
(Laser cutting, stamping, bending, welding, surface coating)

Complete machines und machine components incl. electrical, hydraulical and air compression components according to customers' drawings

The metalworking company G.B.G. specialises in precision machining based on customers’ drawings and projects. Since 1969 it has offered concrete and original tailor-made solutions at high quality standards to satisfy all Customer needs.

The workshop stands as an example of Made in Italy excellence in terms of production and assembly of customised high-precision mechanical components.

Commitment, precision, reliability, organisation, synergy between human intelligence and advanced manufacturing techniques: this is the present and future of the company.

About GEVA metalworking

Quality of professionals for demanding customers - that since 1973, the company represents GEVA metalworking GmbH in Viersen. Our clients are modern machinery and highly motivated, well-trained employees. According to customer drawings we produce turned and milled parts in different batches.

Giesler Drehtechnik GmbH has been a well-known manufacturer of automatic turned parts for the automotive industry and other sectors for over 60 years. As a family company in the Sauerland, we manufacture complex precision turned parts in large series.

The company

The "Heinz Rohrich GmbH" comes from the existing company since 1981 "Heinz Rohrich - racing" out.

In 1996 the company was renamed "memotec metal and motorcycle technology" and continued in the current premises.

Due to the rapid expansion was relocated to Untergruppenbach 1998.
The new facilities now offered the possibility to accommodate two separate departments. Both divisions developed continuously in size and amenities.

In 2005 the name was changed to "Heinz Rohrich GmbH" was.
Due to continued growth, we were able in March 2007 relate a large private building in mite (commercial fishing area fields).

Currently, the Heinz Rohrich GmbH employs 10 qualified employees, which by means of continuing education for the best execution of all tasks.


Services

In the area of metal art welding structures of steel, stainless steel and aluminum are mainly manufactured.For use MIG, MAG and TIG processes come.
The maximum component size is about 3000x1500x1500 mm. The unit weight is up to 5t.

All welding work is performed on SYSTEM TABLES and ensure the best possible dimensional accuracy and angularity.

Our service includes material procurement, preparation, welding, straightening and plastering. Mechanical processing - including surface coating or surface coatings-is performed by partner organizations.

Another field of activity is the order and repair welding at nearly all weldable materials.

A special case forms DC welding of aluminum (reduced delay on machined parts)

The company Heinz Rhrich GmbH offers the following activities:

- TIG and MIG welding of aluminum and wrought alloys
- TIG and MIG welding of Cr Ni steels
- Repair and surfacing
- Manufacturing of complete assemblies
- Jig and troubleshooting
- Single and series production

Production of complex CNC turned parts with bar feed, lathe parts, shafts up to 1000mm, thermowells for temperature measurement, machined parts and complete assemblies for measuring and control technology industry and the energy sector

Hilger GmbH works as a developer and supplier for machinery and
Plant construction and the automotive sector. The areas of work include
Development and production of individual and series parts up to batch sizes of
one million, the development and construction of prototypes and assemblies, and
assembly work.
In over 30 years, Hilger GmbH has been able to develop extensive core competencies in
develop respective areas. The work is characterized by the integrated
product development. Direct collaboration between development and production
enables cost-effective product development, low production costs and
high product quality when entering the market.

We are your competent partner in the field of turning, milling and drilling. In modern CNC machine tools we produce series and items made of steel, stainless steel, brass and aluminum.

Furthermore, we offer a heat and surface treatment.

We supply to companies in the following areas:

* Wind power
* Mechanical Engineering
* Window
Agricultural machinery industry
* Packaging industry

As an essential feature, we look at the high qualification and commitment of our employees. In this way we ensure the required accuracy and can also implement shortest delivery date ideas when needed.

We hope to have given you a good overview and would be delighted if you would consider us for your inquiries.

Production list

Quality down to the smallest detail!
We take care of the production in series - from small series to large quantities.
Our high-quality and modern technical equipment enables us to produce the most demanding pieces. Talk to us! We find the cheapest solution - without compromising on quality. We will send you a detailed and fair offer.

Rotate:
400 mm x 1000 mm (Automates to Dm 250 mm)

Milling and drilling:
500 mm x 400 mm x 2000 mm

Heat and surface treatment

In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches.



Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger.



In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall.



The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern.



In 2000, the certification according to DIN EN ISO 9002 was carried out.



As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the



Hohenlohe precision parts GmbH.



Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners.



The reward for good quality and very little complaints are our satisfied customers.

We are a company with an average of 10 employees. In the area of turning and milling, we produce small to medium quantities and prototypes. Furthermore, we are active in special machine and fixture operates inclusive development and construction.

Every company works best when all employees are happy to do their job every day and with a great deal of commitment.
Just like ours: A well-rehearsed, down-to-earth team, an uncompromising approach to quality and the right mix of experience and youth.

We supply ready-to-install components, including the required surfaces and heat treatments, including Empb, CoC, CMM measurement protocols.

JG AUTOMOTIVE: Developer and Supplier in the manufacture of metal parts
JG Automotive was founded in 1982, dedicated to the manufacturing, development and supply of metal components for the automotive and industrial sector.

Thanks to the mastery of the technologies of manufacturing of metal products specifications provided by clients, we have diversified the industrial sectors of performance and optimized our work processes.

In 2002, together with 18 international partners, we created Global Alliance, a large group with 230 cooperative engineers, manufacturers in Brazil, Germany, China, India, Italy, Japan, Korea and USA, among others, managing a joint turnover of € 1,720 M.

Dozens of companies in the automotive, energy, railway, agricultural, elevation, etc. sectors, are already among our customers and fortunately for us every year we continue to grow thanks to the trust of our customers and the incorporation of new ones.

Our products are presented with their corresponding quality certificates (IATF / TS / ISO / CE / PPAP).

In short Technology and high competitiveness in products to specifications provided by clients.

TECHNOLOGIES: Forging, Casting, Machining, Stamping, Laser cut, Welding, Raw Material, Microforge, Microfusion, Fasteners, High Pressure Cylinders, Hydrogen cylinders for hydrogen filling stations, Toolings, Precision Bar Turning and Special Parts, Inserts and Profiles, Tubes SW and DW and Rod Formers, Springs, E-mobility, Precision Gears, Bearings, automotive plastic injection parts and Returnable packaging of metal parts.

SINCE 2009 ....

The company was founded in 2009 by Mrs. Bettina Landgraf-Kaiser, storage capacity today is about 3000 m² in three halls. As a leading warehouse distributors constantly about 100 cars and well-preserved machines of best brands offered.
State of the art warehouses with crane capacity up to 10 tons and forklift capacities up to 7 and highly trained staff are the benefits for potential customers to find the "perfect machine". Complete "all-inclusive" packages (eg transport, introduction, installation Complete training) are developed and implemented according to your.

MEMBER OF:
Since 2009 FDM - Germany
Since 2009 EAMTM - Brussels (International)

SPECIALITY: Cutting metal-working machines
Our specialty is the trade used machines from metal cutting. Whether conventional or CNC - controlled, we each offer the right machine for you.In CNC - area we act almost exclusively with the control type Fanuc & Heidenhain. Here we can give you the best - provide service, whether coverage with qualified staff, service staff or software solutions.

OTHER:
Furthermore, even spare parts - remakes produced directly in the house with us. Through years of experience of our employees in the cutting process on Fanuc & Heidenhain controls, we can therefore offer cost effective replacement parts alternatives you.

Korrodin has never been the standard distributor for fasteners.

Without having a standard catalogue we specialized from the beginning on in drawing related custom parts combined with highest product quality level and excellence in supply chain management.

Nowadays we are topping off our service level with SuperVendor services and design pre-assorted kits for your most efficient assembly.

www.korrodin.biz

UNCOMPROMISING QUALITY.

We see the exceptional demands of our customers for the quality of our products and services as a standard by which we can be measured every day. A specially developed quality management system ensures the premium precision of our products at all stages of processing. Whether turning, milling, drilling, grinding, assembling — we guarantee our customers uncompromising top performance, functional reliability and high efficiency in the value chain of their end products.

Series manufacturer & automotive supplier for stamped and drawn parts
made of various materials (including 1.4301, 1.4841, DX + Z, DC X, HC, ALU)

It all began with Cleophas Lang...
Shortly after the war, Cleophas Lang founded Lang Metall und Vertriebs GmbH in Munich near Ostbahnhof. The company's main business was chrome-plated parts for the automotive industry.

In the 1960s, around 130 people were already employed and the company moved to Korbiniansplatz in the north of Munich.

In 1974, the company moved into new production facilities at its current location for around 50 employees.

In 1992, Lang Metallwarenproduktion Neubrandenburg GmbH was founded in Woldegk. An old plant near Webasto AG was purchased and rebuilt according to modern criteria. Since 1993, stamped parts and drawn parts for industry have also been manufactured in Woldegk.

In 2011, we received the MAN Truck and Bus Supplier Award for our commitment.

Webasto honoured both companies with the International Supplier Award in 2012.

In 2016, the company in Woldegk became a finalist in the Grand Prix for SMEs.

METAL PROCESSING2
At two economically separate sites in Garching and Woldegk, we produce stamped and drawn metal parts. Through close cooperation, customers of both companies benefit from many years of knowledge and a high level of flexibility.

The partnership orientation also plays a decisive role in our customer relationships. We support you right from the development stage and guide you on your journey from CAD to process-reliable series production. This customer focus and lean structures are characteristic of our economically healthy companies.

Just like our customers, we place high demands on the quality of our products. Continuous new purchases ensure the use of the latest technology. Through continuous personnel qualifications, we achieved a high standard that also exceeds the requirements of German premium brands and has already been recognized several times through supplier awards.