Are all types of wet painting and sandblasting offered, just contact us

Company LAMPIC is located in the middle of Slovenia, Ljubljana. More than 45 years of plating experience with new anodising line in 2012.

Dear ,

Let me speak with this brief presentation of the company Leistritz Turbinenkomponenten Belišće doo, a Croatian subsidiary of the German company Leistritz AG

With regard to the similarity of our activities in the metal industry, the processing of metal parts for the aerospace, automotive and mechanical engineering industries, we offer you the possibility of business cooperation.

In our factory in Belišće we carry out the following operations and manual processing:
- Deburring, grinding with belt grinders
- grinding and polishing
- High-energy vibratory grinding (barrel with 2 Walther Trowal machines)
- Visual inspection
- Dimensional check - 3D CNC measurement (Global, Brown & Sharp - 4 devices)
- 3-axis NC milling (1 piece MAHO 600)

We have significant experience in the processing of blades and metal parts for all major manufacturers of jet engines and steam turbines such as Rolls & Royce, MTU, ITP, General Electric, SIEMENS, Pratt & Whitney.

As a reliable, high quality and certified supplier, I would like to offer you our services and make them available to you.

For a more detailed introduction and presentation, we will be personally available to visit you at the company's headquarters.

Waiting for your reply!

Best regards,

Atila Kerekeš, ing. / Zoran Pepić
Quality manager / production manager - procurator

Leistritz turbine component Belišće doo
Trg A. Starčevića 1
31551 Belišće, Croatia
Tel .: +385 31 662 656
Fax: +385 31 662 683

We are an owner-managed, medium-sized company in the tool and mold making sector. The family business has been based in the Höxter district in East Westphalia since 1961 - in the three-country corner: North Rhine-Westphalia, Hesse and Lower Saxony.

Our many years of experience in the field of tool design and production make us - a team of young and dynamic employees - a competent partner for our customers.

Cooperation and Innovation:
The employees are the most important element in our endeavors to look after customers at a high level, to develop and implement solutions.

Personal interaction and cooperation are characterized by appreciation, recognition, team spirit and mutual respect. Communication is open and constructive.

Every employee feels responsible for the entire company and is called upon to make innovative suggestions for improvement to ensure that the existing procedures and processes are optimal. So everyone contributes to the overall success of the company.

Steel is our lifeblood - that's us

LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019.

LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise.

The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success.

LSV location Landsberg am Lech headquarters

At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level.

LSV location Oberndorf am Lech

The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year.
A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain.

The youngest LSV location in Meitingen

Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

The Parts Spectrum

made with Rotamatik

The extreme variety of parts already made with ROTAMATIK can only be shown as examples.
Send us your drawing, or a sample part to be manufactured and we will calculate the machining time with a ROTAMATIK and show you how much time and cost you will safe and all in “one set up”.

The swiveling vice on a 4. Axis.

If costs are to be reduced on milling-operations, than the new ROTAMATIK Rotary Table will be the answer.
Up to 70% savings on machining time is quite possible.
The ROTAMATIK comes in 4 sizes. Connection to the 4. axis or 5.axis of the CNC-Machine can be made in analog or digital technique.

MAGXYARMET is a well-known European supplier of ready-machined castings, which find their application in various engineering branches. The company has been producing high value alloy steel products since its foundation in 1981 and is nowadays the leading Hungarian investment foundry.

During the past decades the technology has been steadily improved and automated, the castings and components are produced mainly in small and medium sized series. MAGYARMET unites the accurate lost wax technology with a wide variety of materials: low-alloy steels, high-alloy steels (corrosion- and heat-resistant, dupley), war-resistant alloys, Nicke- and Cobalt-based alloys, bronze.

Our technology enables the production of castings weighing between 0,050 and 45 kg. The products of MAGYARMET are used in pumps and valves, instrumentation, food stuff processing, general and chemical engineering, petrochemistry, filtration and packaging equipment, automotive industry and other vehicles, medical equipments, big engine production, process and general engineering, construction etc.The bigger part of our products, approximately 75%, is exported to Germany, Switzerland, Great Britain, Austria, Spain, France, Finland, Denmark, Sweden, Italy and the Netherlands.

The continuous development and the aim to satisfy the demands of various markets led MAGYARMET to start rapid prototyping. This technology joins together the high-tech laser printing technology and the exceptional development of MAGYARMET during several decades in precision investment casting. Rapid prototyping based on 3D printing makes it possible for customers to get the required part machined and ready-to-assemble within two weeks.
MAGYARMET offers full service and ready-to-assemble parts. Our machining shop currently has more than 20 CNC turning and milling machines, NC controlled key-seating machine and other conventional machines at service.


For further information, please, visit our website: www.magyarmet.com

As a medium-sized family business, we have to compete on a daily basis, despite this we pursue our goals with heart and mind. The long-term success is based on trust in our employees, as well as our partnership and successful cooperation with customers.

The motivation to continuously improve our standards and to promote the continuous development of our employees and machines is based on the constantly growing requirements of our customers. Through reliable, first-class quality, flexibility and customer-oriented solutions, we try to meet the requirements and create a long-term business relationship between customers and our company.

Machining with passion - this principle has been practiced at Makron from the beginning and takes place daily in our production. Our competent employees are the most important quality factor and the heart of Makron GmbH. For this reason we don't think in quarterly reports but in generations!

With access to a wide range of products and production spectrum in the field of sheet metal processing (perforated sheets, expanded metal mesh, metal mesh, knitted wire mesh, drilled sheets, embossed sheets, demister, metal filters, wire bending parts, ornamental chains), as well as cross-industry knowledge, we are able to optimally to use. We work with qualified partners throughout Germany and parts of Europe, resulting in a fast and professional advice and support is guaranteed.

The services

The latest technology and years of know-how for the benefit of our customers - true to this philosophy, we support our customers from development to mass production partnership to the side.

At our professional CAD work we process your specifications. Our manufacturing know-how helps you to cost-effective and functional solutions.

From the production drawings (CAD), we program the production program externally on our programming station and transmitted it directly (DNC operation) to the appropriate machine.

This results in complex, high-precision CNC turning and milling parts that we supply mounted ready for installation or complete assemblies.

Offered manufacturing process

Machining: turning, milling, drilling, thread cutting, sawing
Forming: Bending, Tube Bending
Finishing: brush, grinding, polishing
Mark: labels of all kinds, special packaging
Install: Installation and connection technologies of all kinds
External: Surface treatments of all kinds (galvanic, chemical, thermal), painting, honing, broaching, gear cutting, EDM

Karl Ruhl Maschinenbau GmbH was founded in 1983 by its current Managing Director, Karl Ruhl
founded as a sole proprietorship. Steady growth and continuous structure required in 1987 the use of CNC technology.

In 1991 a new production hall was built, which was commissioned in November. Currently 8 qualified employees.

Karl Ruhl Maschinenbau GmbH, production partners and suppliers demanding machine components, precision parts and special machines. An efficient, economical and high quality production requires high precision in all production stages.

We consider the full range of CNC turning and machining technology available and are thus in a position to even complex parts economically, precise and inexpensive to manufacture.


Our specialty:

Production of individual parts; series parts, including all materials in steel, cast iron and non-ferrous metal sector.

Production of machines and equipment according to your design and manufacturing drawings or documents.


Meaningful integration of the entire production field, a good business organization CAD systems with integrated NC programming, DNC operation and the latest manufacturing technologies from leading manufacturers of machine tools and the use of advanced editing tools enable a very high-quality and effective production.

Quality - punctuality - Cost effectiveness - performance

be with us in one hand and the basis for the delivery of small and medium series of the highest quality at excellent conditions. From a simple part to complex requirements.