Deformation of cold rolled strips with press:
In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness.

Fine blanking:
Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge.

Drawing and deep drawing:
Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm.

Screws:
TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness.

TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

T.M.C. SRL is a young and dynamic company founded in 2006 in trissino, in the province of Vicenza, which operates in the field of precision mechanics, realizing machining of mechanical turning.

Professionalism and experience are made available to customers for a wide range of realizations, all attention to detail and guaranteed by the competence of the staff employed and the use of modern and high precision machinery,
constantly updated and expanded in order to meet all kinds of needs of the sector.

The company specialises in turning small parts having a diameter of up to 75 mm, using four, six and eightaxis
double-spindle CNC machinery, equipped with powered tools for angled drilling-threading and milling on all ferrous and non-ferrous materials.

TMD-AGS d.o.o. Gradačac is a company with decades of knowledge in metal processing.
Founded in 1954. as manufacture of parts and machines in agriculture.
With constant development and investment in new achievement and technologies, today we are leaders in production of tools for aluminium casting under high pressure and also trimming tools. We run departments with modern CNC machines for cast parts processing in automotive industry, turning plant in medium and high series and automatic line for electrostatic painting.
Our constant growth and development motivate us to seek for new customers. Our advantage is knowledge in various technologies such as processing of steel and non steel metals, plastic parts for food and chemical industry.
We are system supplier of aluminum castings in automotive sector, electrical industry and home appliances.
We specialize in parts with high ribs and offer parts that are ready for installation.
Our team will help You or give You solutions for casting system, cast design based on product design, casting and turning tool design, parts casting, machining and surface protection.
We have ISO 9001:2015 & IATF 16949:2016.
We are supplier of tools and parts for Wagner AG Waldstatt, Wagner Automotive, FFT, Remus, Stobag AG, Magneti Marelli SRL, Borg Warner GmBH.

''TMD Hanibal'' Limited Liability Company was estabished on September 1st 1999 when it privatized a part of the then motor parts factory ''TMD Gradačac'' and opened a production plant – tool shop.

Tool shop ''TMD Hanibal'' Ltd was founded with a tendency to implement the highest technology in order to meet the high quality standards required by customers. Our goal is to become development partner to companies in European Union countries. Focusing on goals of our customers, recognizing customers' needs and relying on continuous improvement and education based on teamwork and cooperation, our team is ready to respond to the demands of our customers and offer the best solution. Our team consists of 60 workers, of which 5 machine engineers, 3 administrative workers, 30 experienced CNC technicians for machining centers, 20 experienced CNC scraping technicians, as well as grinders, toolmakers and locksmiths.

machining operation

Our Company's History and Development

Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees.

We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility.

We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production.

Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients.

In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

Workings begin with co-design together with the customer, continuing with the in-depth study of the work cycle, the choice of additional materials and treatments to be carried out to the realization of the prototypes.

Production is supported by careful process control. In addition, all stages are interwoven with washing machines performed with ultrasonic machines to avoid any residue inside.

The packaging and shipment arrangements are made according to the specific requirements of the customer, thus guaranteeing the absolute protection of the product.

Trasmissions Buzzolan Srl is a mechanical workshop that manufactures straight-tooth and helical gears, grooved shafts and high-precision mechanical components, through turning, milling, broaching, slotting and toothing. The experience gained over the years in the field of mechanical transmissions makes it possible to offer a highly technological production cycle accompanied by structured quality controls. To create our products, we start from materials such as common and alloy steels, aluminum, bronze, cast iron, brass and plastic materials. The company also offers heat and surface treatment and welding processes that are carried out by sought after and trusted external partners. Our Metrology room provides our team with innovative machinery and control tools throughout the processing cycle, from the start to the finished product. The company's goal is to guarantee products that meet the required quality standards with timely deliveries, offering accurate and attentive tailor-made technical advice if necessary.

TRE DI Snc was born as a small business in 1979, and has grown simultaneously with the development of the North-East, where personal initiative, ideas and the spirit of work are not lacking.
The activity of this company is identified in the production of turned small metal parts built according to drawings or samples supplied by customers.
TRE DI specializes in the processing of metals, aluminum, steel and brass and, thanks to the complete fleet of traditional and CNC machines and the use of highly qualified personnel, is able to create special components, prototypes, turned and milled parts of series.
The company was therefore structured in such a way as to be able to completely manage the development of a new product through the use of its services by following this production process:

 Product conception according to customer directives;
 Realization of equipment and prototype;
 Custom production.