The Techno Trans GmbH

making for over forty years (emerged from the former "screw")
Quality and precision work and
is dedicated to the manufacture of special tools

a) for chipless forming
for hot and cold forming presses:
such as matrices, and Matritzenfassungen - inserts, extrusion rams, hole and Auswerfernadeln

b.) for metal shaping
for single - and multi-spindle automatic lathes and fitting and special machines.
eg clamping and feeding tongs, clamps, steel holder and smaller devices. Round shape chisel, flat chisel shape, Tangentialmeißel, inner shape chisel, shaping tools and countersink.

We also accept
Turning-milling and drilling operations outside round, inside round and Flaschleifarbeiten, and profile grinding

As a service we also offer the repositioning of tools to

Construction 2.5D and 3D
burn
weld
glow
radiate
CNC milling and boring machines to 10to

Deformation of cold rolled strips with press:
In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness.

Fine blanking:
Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge.

Drawing and deep drawing:
Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm.

Screws:
TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness.

TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

U. Eitner
Tooling, EDM & Plastic GmbH
Benzstr. 7 D-64807 Dieburg

Ask us!
For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ²

Tool and die
All equipment needed for tool available eg Senk - and
Wire EDM.
Max 3T tool Total weight approx 25 Tools / year

Engineering and CNC machining
4 CNC lathes and machining centers 4
Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes.
Rotate: Max diameter 800mm

Plastic injection molding
10 Arburg injection molding machines, max. 150T, fully automated.
Automotive, electrical and thermal engineering
about 30 million plastic parts parts per year.

CNC contract manufacturing for tool, machine and plant construction.

Do you build tools, machines or special machines?

Do you need precision parts for your machines and systems?


We take over the CNC manufacturing. Contract manufacturing for mechanical engineering, tool making or mold making. Take a look at our manufacturing examples!

We manufacture highly efficiently on modern machining centers quickly with high quality and on time. Leading machine manufacturers have been relying on our production since 1989.

Due to the wide range of production the Giggel GmbH is a competent supplier to the automotive industry and manufactures for the prototype development of all metal and plastics processing industries.

Quality, high flexibility, short delivery times, as well as innovative manufacturing processes set us apart.

Our ranges include:

• Prototyping / Low Volume Production
• Construction (Pro Engineer / Catia)
• Programming (Tebis / Work-NC / TruTops)

Mechanical processing:
• Machining of aluminum, steel, stainless steel and light metal alloys
• 3-axis / 5-axis / 5-axis simultaneous milling / CNC turning

Forming:
•

The Walter Kern GmbH is a certified tool and fixture producer from the Allgäu and covers the entire process chain of metalworking.

- CNC milling (5-axis)
- HSC and Ultrasonic milling (5 axes)
- CNC turning (with Y-axis and driven tools)
- Wire and sink erosion
- Flat, round, and profile grinding
- Punching and bending
- honing
- saws
- Sandblasting and glass beads
- hardening
- Assembly
- Measure

We are a mechanical company located in Poland, and we help companies to establish their businesses in Central and Eastern Europe.
We are dealing of mechanical breanch, we are evidencing services of constructive and executive machines and appliances.

Few words about our company.

We are produce: equipment for poultry slaughterhouse, equipment for dairies, stainless steel tanks, roller, belt, screw conveyors.
We offer services of welding stainless steel.

We are looking new orders for stainless steel production, do you know company who looking for manufacturer or subcontractor?
wamasz.pl

We are proud to present our company, which not only offers wire EDM, but also a comprehensive range of services in the areas of milling, turning, surface and cylindrical grinding as well as coordinate grinding with heat treatment.

Our commitment to the highest quality and precision is underlined by our 24/7 service. We are always here to meet your requirements and meet your expectations to the fullest extent.

We focus on the customer. We strive to work on your projects with passion, expertise and innovation. Your satisfaction is our motivation and we are determined to provide you with service that exceeds your expectations.

Together, we want to achieve great things. We invite you to become part of our success story and set new standards together.

Visit our website or contact us directly to learn more about our services and how we can help you achieve your goals.

We look forward to working with you and making your projects a success!

sincerely

Tim Wolf
ceo
Wolf metal processing
info@wolf-metallbearbeitung.com
07022 2055958
https://lnkd.in/etxfnMWv

Our company was founded in 1994 and grew into a universal partner for the fastening technology - zoom and equipment and the automotive supply industry - and stamping industry, mechanical engineering, plastics industry and medicine.
In our activities, we pursue three main directions:

Production and sales of tools for forging and for the pharmaceutical - and plastics industry
Sales of fastening technology of titanium and other special alloys for the automotive and aviation
Equipment works for fastening industry, engineering for special solutions in the metal working industry

PRODUCTS

Modern machinery combined with years of experience, has established WSD with quality, service, dedication and reliability at a leading mold manufacturing company in Europe.

Starting in tool for cold and hot forming tool further spectra were opened. Our precision tools found among others now their use in industrialized areas of plastics processing, fine blanking technology, special machine construction as well as the pharmaceutical and medical technology. The Trade of fasteners, screws and fittings complements our service portfolio.