Discover specialized suppliers for 3D form milling on Techpilot. Our platform connects buyers with suppliers who use advanced milling technologies to create complex 3D shapes. Use the e-sourcing process to find the best suppliers.
We are specialized in the manufacture of special machines (welding, assembly, control, machining, ets.)
Design office
Precision mechanics small and medium series.
Founded
Employees
Certifications
Clairegoutte
France - 70200
Founded
Employees
Certifications
Obermarchtal
Germany - 89611
Consultancy, prototypes and series parts
For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization.
As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ².
Articles of our production, please refer to:
Air springs,
Metal rubber elements
Vibration elements,
Hydrobearings,
Chassis suspensions,
Motor bearings and
Machinery bearings.
Our range includes:
Butted and clinched rings as a substitute for pipe sections,
Support rings,
Reinforcement rings,
Pole plates and flywheels for the electrical industry and
Fußkufen for the furniture industry
The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008.
We look forward to your inquiry.
Founded
1954
Employees
20 - 50
Certifications
Delmenhorst
Germany - 27755
Founded
10
Employees
10 - 20
Certifications
Brcko Distrikt
Bosnia & Herzegovina - 76100
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
We have over ten years of experience in the field of satellite-reception technology. During this time we have manufactured more than 700,000 motors for the rotation of satellite dishes, including the electronic components required to direct the dishes at a selected satellite. New products, such as solar motors, small BLDC motors with reducers and printed circuits, are a natural development based on our previous successes.
Our experience in the field of planning, development, maintenance of products and customer support continues to grow. For all the products listed above we can produce the printed circuits and CNC- turned components, which we offer to our customers.
Currently, our products are exported to 60 countries. Development-oriented products under the SAT CONTROL trademark are the basis for our expansion into new markets.
Customer satisfaction is of key importance to us. We endeavour to develop partner relations with our customers in order to provide efficient solutions tailored to their requirements, and to exceed the expected results.
We have been striving to attain ever-better quality, and have begun to introduce the ISO9001 system. We are confident that we will continue to improve in the future.
Founded
1996
Employees
10 - 20
Certifications
CERKLJE
Slovenia - 4207
Founded
Employees
10 - 20
Certifications
Konarevo (Kraljevo)
Serbia - 36340
Tradition and innovation determine our success.
The experience of over 50 years, Sauer & Mould has made it the recognized partner in the plastics processing industry as well as well-known automobile manufacturers and suppliers Formtechnik son.
We create different manufacturing techniques PROTOTYPE TOOLS
We manufacture custom tools, sophisticated components, but also complex assemblies. The latest CAD-CAM applications are used.
Cost minimization by existing master molds and hot runner systems in different sizes, maximum dimensions 1.800 x 1.200 mm.
We create series and small series INJECTION TOOLS
Long-standing expertise has Sauer & Sohn molding technology in the manufacture of injection molds for the production of plastic parts for the automotive and non-automotive industry. Examples of working with Veritas are the tools for the cowl and air flow.
We offer SERVICE CULTURE
Our experience and expertise of over 50 years, we also mold plastic injection molding company without own tool for the maintenance and repair of
Injection molding tools available.
Key figures and production facility
Employees: ..................... 50
Training rate: ............. 10%
Plot: ..................... 12,500 m2
Covered Area: 4,300 m2 .............
Development / Design: ... 370 m2
Administration / Sales: .......... 720 m2
Production: ...................... 3,100 m2
Stock: ............................ 1,050 m2
Founded
1957
Employees
50 - 100
Certifications
Dieburg
Germany - 64807
Founded
Employees
50 - 100
Certifications
Dieburg
Germany - 64807
Founded
Employees
5 - 10
Certifications
Werther
Germany - 33824
The Saxonia Precious Metals GmbH is since the beginning of the 17th Century in the Freiberg region existing tradition of mining and processing of precious metals continues.
Already in 1612 the "hut on the Halsbrücker Spat" was founded.
1663 "Halsbrücker smelter" by the Saxon Elector was taken. Later it was renamed the "Royal smelter".
1861, it was then launched the gold refinery neck bridge.
Today, presents former subsidiary of Deutsche Nickel AG Technology Group in the core areas of precious metal recycling and processing as a recognized and reliable partner of the user industry. Modern and environmentally sound facilities, innovative products, motivated and experienced staff and a quality management system according to DIN EN ISO 9001-2000 document the performance and competitiveness of the company.
The Saxonia Holding consists of four manufacturing companies at two locations in Germany.
At the site Halsbrücke about 200 employees, and at the Pforzheim location employs about 150 workers.
Products from precious metals: Semi-finished products, chemicals, recycling, contact and parts
Alloys: Ag, Au, Pd, Pt, Rh, Re, Ir + base metals Cu, In, Ni, including
- Round wires
- Flat and profiled wires (after drawing)
- Rods and tubes
- Sheet and strip
- Targets
- Anodes and salts
- Weld-on and Auflötkontakte
- Assembled contact parts, welded, soldered or riveted design
- Contact bimetals (deposit and support profile semis)
Founded
-
Employees
500 - 1000
Certifications
Halsbrücke
Germany - 09633
Dear Ladies and Gentlemen,
the SBF would be like to introduce as a supplier in your home.
Our company is a supplier of workpieces, which are produced by Cutting production. Due to our flexible production and employed there highly skilled employees, we are able to single and serial parts and assemblies to produce timely and economically.
Delivery program:
Piston bushings bushings washers rings valve seats screws cone spool pipes sleeve shaft axis hub plug valve spring retainer pin roller bolt nozzle mandrels aperture spindles mandrel sleeve cover assembly Bock valve plate table threaded plate connecting pin torque arm gear sandpit spacer door shaft clamping tube pump housing gear holder electrode 3D shape mold cap switch shaft piston Rollenflanschplatte flange Supporting tube roller bearing sliding bush buoy float design light
We will gladly process your rush order! We are certified according to DIN ISO 9001 and 14001.
Machine list - The following machines are available:
Milling machines:
Heidenhain TNC 426
Travel: X1000 Y600 Z500
Tool changer 40 - Trade
SK40 drive power 23 KW n = 8000U/min spindle cooling
Table load up to 1000Kg
Heidenhain iTNC530
Travel: X1000 Y600 Z700 4.Ache by CNC dividing head
Tool changer 40 - Trade
SK40 drive power 17 KW n = 8000U/min spindle cooling
Direct measuring system on all machine axes
Tool and Werkstückvermesssystem M & H
Table load up to 1000Kg
Machines turning:
Control: Mazatrol Matrix
Travel: X460, Z550, Y 110, C axis
Programmable Tailstock, parts catcher and bar puller, feed and chuck, Driven Tools radially and axially
Drive power 23 KW n = 4500U/min
Lathe conventional D = 460, Z = 1500
Other:
Heska Saw 260
Founded
2007
Employees
5 - 10
Certifications
Schwebheim
Germany - 97525
Founded
Employees
10 - 20
Certifications
Barßel
Germany - 26676
Manufacturer of customized drive solutions with core competence teeth in metal, plastic, and metal-plastic composite parts.
Customers in the automotive, building, engineering, medical
Founded
1856
Employees
200 - 500
Certifications
Schonach
Germany - 78136
As a specialised company for precision tool engineering S+B is the right partner for: Support in developing ideas, Designing and Drawing, Developing recommendations for fixtures, Manufacturing according to plans and tolerance guidelines.
Founded
1963
Employees
10 - 20
Certifications
Hösbach-Rottenberg
Germany - 63768
Our advantage
Stay more agile
faster and more productive
Modularity to the power of three is the catchy short formula for a new idea: the modular design concept of SBT production machines for metal parts production − for more options, more speed and more output.
SBT production machines were originally designed as a link between classic automatic punching machines and automatic punching machines. They combine the advantages of both systems — the flexibility of the punching machine and the short set-up times or long tool life of the automatic punching machine.
Founded
1980
Employees
20 - 50
Certifications
Wöllersdorf
Austria - 2752
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
HOT PRESSES
Reibspindelpressen from 200 to 1000 tons, equipped with up-and Abladearmen for the parts are supplied by gas and induction furnaces and guarantee the consistent quality of the product. Einständerexzenterpressen from 30 to 100 tons, hydraulic presses from 25 to 100 tons with four organizations rotary tables, form an extensive and efficient machinery that meets the quantitative and qualitative requirements of the market.
HIGH-SPEED PRESS CAST
By use of high-speed machines, type "DYNACAST AND TECMIRE" highly complex and extremely accurate items are produced in large and medium-sized series that are already ready for installation in many cases and are used in various application areas. Thus considerable price advantages can be achieved.
Founded
1948
Employees
Certifications
Scandicci (Firenze)
Italy - 50010
Production and component assembly of single pieces and small series.
Founded
2015
Employees
< 5
Certifications
München
Germany - 81549
Founded
Employees
10 - 20
Certifications
Barcelona
Spain - 08017
Founded
Employees
20 - 50
Certifications
Eggenfelden
Germany - 84307
Who we are ?
Young and very determinated CNC Machining Workshop
Something needs to motivate a person for that person to give the best in what they do. How we do that? We believe in our passion. We’re all passionate about Machining and engineering, that`s why you will see some unique products, we spent thousands of hours studying parts and trying to improve every time.
First of all we stand for quality, that`s why we decided to buy our own CNC Machines and to develop the Machining center in Romania, From design to final product we have all the solutions
CAD Service , Product Design in SolidWorks
CAM Programing in SolidCam
3 and 5 Axis Machining
Private Labeling
Laser Engraving on Aluminium , Steel , Stainless Steel, Wood, Plastic
Packing and Branding your parts in house
Fast Shipping from our Romanian warehouse
.
Machines :
DMG Mori CMX50U 2020 X 2 Pieces
DMG Mori CMX50U 2023 x 1 Pieces
50W - Laser Engraving
Automatic Skin Packing Machine
Software : SolidWorks / SolidCam 2023
Founded
2019
Employees
5 - 10
Certifications
Alba Iulia
Romania - 510185
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
