Welcome

We see ourselves as an average modern operating company, based in Istanbul.

Our company is working successfully in different industries (mechanical engineering, textile machinery, medical instrument industry, automotive industry, construction industry, graphic and optical industry, etc.) whose requirements are as varied as your products.

In our mechanical production, we offer you virtually all machining manufacturing processes. Drilling, turning, milling and external cylindrical grinding in conventional production, milling and turning on modern CNC machines. That is our guarantee for your series production.

With us you always get a completely finished product. Whether small series or prototype, whether raw or finished coating, whether or Kuststoff steel - all orders we finished quickly, reliably and accurately measured.

Take advantage of our many years of experience and learn in the following pages to know our wide program.

We are happy to await your inquiries and would be pleased if we could count you among our satisfied customers and your company.

We support each other. The quality of our work ensured the success of our company.

"Everyone is for each model, with production processes, each of the customer of the neighbor."

About us

The company Integral Makina sees itself with its long-standing and qualified staff as a traditional but modern positioned and competitive manufacturer of components for the Maschienenbau, Textilmaschienen, Medical Instrument Industry, Mechanical biomedical sector, automotive industry, construction industry, graphic and optical industry, etc.

The technological requirements are determined by modern CNC machining centers.

As the material in addition to steel and cast iron, aluminum, plastic and stainless steel, etc. is processed.

Through close cooperation with companies from the region, we are able to manufacture complementary areas, suchEtc. to use as sheet metal processing (laser cutting), Hardening, Surface Finishing, external and internal cylindrical grinding, surface grinding, welding, assembly in a variety of ways and included in our manufacturing facilities.

Customer-oriented quality assurance and on-time delivery are our determined measure of performance.

Our company deals with business development for German and Korean companies.

Our representative range includes:



Aluminiumsandguß,
Aluminiumkokillenguß,
Die-cast aluminum,
Die-cast zinc,
Messingdruckguß
Stahlfeinguß,
Edelstahlfeinguß,
Gray cast iron,
Nodular cast iron,
Mechanical processing,
Model and surfaces.


Our main focus is in the field "Service".
We understand it as to-be always there for our customers to solve problems constructively participate and advise in detail.

We, that is, we represent foundries exclusively manufacture according to customer drawings using the latest equipment and machinery.
Due to the variety of parts we, have we and our specialist light in almost all industries over the corresponding know-how.

We are happy to work in close cooperation with you for an optimal offer for you.

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies.
Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories.

Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself.

The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are:

Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up.

Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding.
Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts.

In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems.
Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

In more than 50 years came from a small family, a modern company.
Our work is based on the latest technology in production, a customer-oriented organization and expertise in all areas of Al and Zn die-casting, as well as the Al-Kokillengusses.

Customer satisfaction, short distances, quality, experience, flexibility, environmental awareness and innovation. This will make us a lot of customers to a major supplier for castings of aluminum and zinc. We help you in achieving your claims in the shortest possible time and in top quality.

We have specialized in casting products in small and medium series.
We assume not only casting production, but also the mechanical machining, surface treatment, assembly and logistics of pre-finished parts.

A high degree of punctuality in through a personal contact person is the foundation of a successful partnership for us.

We customize from the original model to finished casting and produce both in small series as well as in large-scale production

Our engineering office was established in 1954 and is headed by Dipl.-Ing Peter Kaczynski since 1988.

From the beginning, the focus was the procurement of machinery parts in the international supply markets.

For 20 years, these are primarily Foundry products from worldwide manufacturing, as
Steel investment casting, stainless steel investment casting, lost wax casting, sand casting, permanent mold casting, die casting, aluminum investment casting. Furthermore, we also supply MIM parts (metal powder injection molding) and sintered parts. Also, turning parts, stamping parts, metal stamping bending parts and forging parts belong to our program.

Mechanical machining (CNC turning, CNC milling), heat treatment (hardening, vacuum hardening, induction hardening, carbo-nitriding), surface treatments (zinc plating, electro polishing, polishing, chrome plating, nickel plating) are now standard.
Module assembly after consultation with our customers.

All our foreign partners are certified.

Our workshop is located in Bakonszeg in Hajdú-Bihar county, 7 kilometers from Berettyóújfalu. We are engaged in casting since 1982. We are producing non-series and mass production adopting sand and gravity die casting products.The maximum weight of castings we can produce is 150 kgs for aluminium alloy parts and 200 kgs for copper (tin bronze) alloy parts.

We deliver the castings in unmanufactured or after machining. Metal works possibilities are: lathing, milling, AWI shielded-arc welding, heat treatment , sand blasting, electrostatic powder coating etc. We are in contact with companies designing and manufacturing gravity die casting dies.

Our customers are companies concerned in transportation, food, agricultural and textile industry, shops selling equestrian sports products.