As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

Worldwide design and production of conveyor chains, sprockets, machining (e. g. milling, turning) and hardening

Zanardi Fonderie S.p.A. produces spheroidal ductile iron castings and austempered ductile iron castings (ADI) with a green moulding process. Production, which includes machining and austempering heat treatment, is located In our only plant in Minerbe (Verona, ITALY), which employs about 220 people, The production capacity is mostly oriented on medium size batches and the full annual capacity is about 22,000 tons, of which 10,000 in ADI, with a unit weight between 0,5 and 120 kg

We have a broad technology knowledge for cutting, welding, brazing and hardening with the laser beam. This we use both in contract manufacturing and engineering projects as well as engineering for our customers. We offer Twelve-modern laser systems, equipped with self-developed technology and process monitoring systems Engineering, contract manufacturing and engineering from a single source Quality Management System according to DIN ISO 9001 -Extensive experience in process development and mass production

Steinhauser Formenbau, formerly a classic mechanical engineering company - today we have focused on precision mold with private pilot specialized. Company motto: From idea to series We are a DIN ISO 9001: 2008 certified company from Lower Bavaria and offer precision engineering and advanced manufacturing by its own machinery. A specially equipped technical center provides sampling and pilot production of LSR molded parts. Your advantage: you get mature, production-ready LSR injection molding!

Fonderia Persicetana has been working for over 40 years in the field of light alloy aluminium casting. The experience and the know-how accumulated over the years enable us to satisfy any market request, thanks to continuous investments and expansions aimed at boosting the production capacity and improving the technical quality.

VR Technology was born from the synergy of a group of entrepreneurs who have been operating in the steel sector for decades to allow them to expand their range of services to the customer. Thanks to its technical structure and thanks to its machinery, the company is able to act as the sole interlocutor for the customer as it is able to manage the entire production process and provide "turnkey" orders. VR Technology focuses its attention on the construction of structures for the most diverse fields of use, such as: o Cableway (station structures, frames, supports, trunks, trees, pulleys and spokes); o Lifting systems (gantry cranes, bridge cranes, jib cranes and marine cranes); o Machine tools (press bases and bases); o Hydroelectric (Pelton, Francis, Kaplan boxes, distributors, suction and bifurcated pipes); o Waste treatment and disposal plants (tanks, agitators, ovens, boilers, chimneys, heat exchangers and combustion chambers); o Civil and industrial constructions (welded beams, complete structures and columns); o Fixed and transportable rides; o Production of design details including mechanical processing. Mechanical processing is the cornerstone of production activities. Thanks to its flexible structure, the company can vary its production according to the needs of each customer. VR Technology relies on qualified welders according to UNI EN ISO 9606-1, the entire welding process is performed in accordance with UNI EN ISO 3834-2. The companies that Vr Technology relies on for non-destructive tests provide 2nd level qualified personnel in accordance with UNI EN ISO 9712. The company is undergoing EN ISO 9001 certification. We remain available for more detailed information, or for any requests for offers.

Arfino specializes in the production of precision-turned components in brass, bronze, and aluminum, with a particular focus on lead-free alloys. The most refined surface finishes and the tightest tolerances emerge through the use of the highest quality machinery and tools. The company, aware of the need to systematically and documentedly ensure a high quality standard for its products, has established a Corporate Quality System that meets the needs of its customers.

R.Biemme-Tech was a manufacturer of powder metal structural components. Our main products: structural parts, gear wheel, piston, plug and so on. The strength of its business philosophy, is the ideal partner for development of OEM applications, offering functional solutions, which optimize the total product of the customer. R.Biemme-Tech strongly believes that the productivity boost based on the industrialization of products, is the new frontier of the future in the mechanical field. R.Biemme-Tech has now become a real partner for the development of experimental components and analysis of construction problems, achieving high performance in powder metallurgy and an adequate price / quality ratio. Qualified technical staff will follow the customer during the study, prototyping and commissioning of industrial product. R.Biemme-Tech has as main objective the satisfaction of the customer in every aspect and detail, addressing the different needs, both in economic and technological. R.Biemme-Tech offers its customers: - Service, Design and Codesign - Absolute Transparency Service - Total Service Guarantee Strength and pride of R.Biemme-Tech is the ability of engineering, providing solutions before products. R.Biemme-Tech is responsable for: - perform functional design of complex systems, not strictly related to powder metallurgy - carry out the verification of resistance and structural calculations for the preliminary study of the reliability of the product - industrialize the components and process

As an independent family, we turn with our businesses and Gesenkschmiede PERSTA valve to customers and markets. Commitment and skills of our employees are us traditionally as important as the use of facilities, equipment and processes, according to the current state of the art. Our goal is sustainable economic success through customer satisfaction with service, quality, delivery and price policy.

Karl Ruhl Maschinenbau GmbH was founded in 1983 by its current Managing Director, Karl Ruhl founded as a sole proprietorship. Steady growth and continuous structure required in 1987 the use of CNC technology. In 1991 a new production hall was built, which was commissioned in November. Currently 8 qualified employees. Karl Ruhl Maschinenbau GmbH, production partners and suppliers demanding machine components, precision parts and special machines. An efficient, economical and high quality production requires high precision in all production stages. We consider the full range of CNC turning and machining technology available and are thus in a position to even complex parts economically, precise and inexpensive to manufacture. Our specialty: Production of individual parts; series parts, including all materials in steel, cast iron and non-ferrous metal sector. Production of machines and equipment according to your design and manufacturing drawings or documents. Meaningful integration of the entire production field, a good business organization CAD systems with integrated NC programming, DNC operation and the latest manufacturing technologies from leading manufacturers of machine tools and the use of advanced editing tools enable a very high-quality and effective production. Quality - punctuality - Cost effectiveness - performance be with us in one hand and the basis for the delivery of small and medium series of the highest quality at excellent conditions. From a simple part to complex requirements.

Our company was founded in 1994 and grew into a universal partner for the fastening technology - zoom and equipment and the automotive supply industry - and stamping industry, mechanical engineering, plastics industry and medicine. In our activities, we pursue three main directions: Production and sales of tools for forging and for the pharmaceutical - and plastics industry Sales of fastening technology of titanium and other special alloys for the automotive and aviation Equipment works for fastening industry, engineering for special solutions in the metal working industry PRODUCTS Modern machinery combined with years of experience, has established WSD with quality, service, dedication and reliability at a leading mold manufacturing company in Europe. Starting in tool for cold and hot forming tool further spectra were opened. Our precision tools found among others now their use in industrialized areas of plastics processing, fine blanking technology, special machine construction as well as the pharmaceutical and medical technology. The Trade of fasteners, screws and fittings complements our service portfolio.

“IF MACHINES COULD DREAM THEY WOULD DREAM OF OUR PARTS.” Quote: Klaus Engelmann We are your specialist for metal, steel and sheet metal processing in the areas of construction, laser cutting, flame cutting, bending, low-stress annealing, sandblasting, welding, grinding/deburring. Our materials are manufactured exactly according to customer requirements, whether samples, individual or series production. Our production can take into account delicate, simple or complex shapes.

With over 25 years of experience on the market, we are a company specialized in the production of a large variety of stainless steel products and other tools for the automotive industry. Such tailored parts are used as molds when vulcanizing the sleeves (parts of the cars engine). Our company has the capacity and expertize to export fast and safe its products in any country of Europe or Latin America. Inoxform keeps high management standards and, starting with 2011 we are certified in Quality Management System ISO 9001. We invite you to browse our website and review some of our products, services, and the equipments used in manufacturing. If you have any query, feel free to contact us. We are always available.

Soldering technology & heat treatments Vacuum soldering, inert gas soldering, induction soldering Annealing under vacuum and protective gas Manufacture of complete solder assemblies

Iron Foundry GJL and GJS BENODUR ADI SiMo Hand and machine moldings

We finished on a modern machine with Wafiosautomaten and feature a fully automated removal and control of the springs during the production process. Automated Packaging Systems in plastic pipes, heat treatment, surface treatments such as the tribo process or passivation, we have internally. Depending on the machine type, we manufacture Compression springs having a wire diameter of 0.1 to 12 mm Tension springs having a wire diameter of 0.2 to 6 mm Rotation / Schenkel-/Doppel- or torsion spring with a wire diameter of 0.2 to 8 mm Technical Bent wire parts: simple and complex shapes to 7 mm

The PHOENIX tooling GmbH is high vacuum technology as a service-providing tool and mold as well as manufacturers of precision parts, assemblies, special machines and Equipment supplier to the national auto industry, medicine and household appliances, machine and plant construction, as well as steadily growing, and the solar and solar industry.