Jebens GmbH is one of Europe's leading gas cutting works and trading houses for plate with his own mechanical processing and manufacturing of complete welding components.


We stock and supply
-------------------------
Plates and slabs of steel S235, S355, high-strength fine grain structural steels (S690QL, S960QL), pressure vessel steels (P265, P355, P460), wear fine grain steels (Dillidur 325, 400 Dillidur, Dillidur 500) and 16MnCr5 and C45

We manufacture for you
---------------------
In our total of 11 gas cutting equipment (Oxy + plasma) we burn parts of 10 - 1000mm thickness and can handle up to 50 tons unit weight

In addition to its own paint shop and 2 sand blasting machines we have our own heat treatment for stress relieving and normalizing sheets

Our milling and drilling rigs allow a complete mechanical processing

As part of our components manufacture, we manufacture complete welded structures with up to 40,000 kg per piece

Our customers
-----------------
We supply customers in almost all of Europe. Our customers are mainly in the fields of crane manufacturers, construction machinery, injection molding machines, presses, special vehicle construction and general engineering.

- Machining of high-precision drawing parts (turning and milling)
Sleeves, housings, covers, receptacles, holders, SMA
- Prototyping and Massproduction
- Al, Brass, Cu, VA, Ti, Mg
- specialized in optics & lasers
- overnight manufacturing
- mounting of assemblies
- supplyer of thermoelectric modules (TEC-Peltier.Modules)

JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures.

OUR DEPARTMENT: 1 engineering office + 1 machining company

A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL.

For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts.
Our team: 6 engineers and 5 technicians are at your disposal to answer your problems.

Our strengths :
- Development of specific solutions
- Prototyping
- Machining
- Cutting
- Manufacturing

Our philosophy: Provide French quality products at the best prices!

Company JK NASTROJE focuses for precision machining primarily for precision milling on 5 axis CNC centers. JK NASTROJE is a stable company with 150 employees and long tradition. JK NASTROJE produces precision machined parts for weapons, optics, laboratory scales, CNC machines and tools for reasonable prices. We arrange for you a complete supply the required components including heat treatment and surface treatment. Below are samples of our products and link for JK NASTROJE web pages: http://www.jk-nastroje.cz/en/index.php

the company Roland Fischer GmbH in winter Bach enjoys in precision turned parts manufacturing for decades a special reputation for their expertise, quality and reliability in the manufacture of turned parts.

Like some other Swabian component manufacturers with widely known in Europe, they could also earn a special place in their area. Surely this reputation for delivering precision work immediately reliable, the ability of the company contributed mitzutragen new developments, they operate in a very short time and produce prototypes. The Roland Fischer-production program includes over 1200 different precision turned parts. The diameters are from 1 to 22 mm.
We also manufacture turned parts up to form 43 mm diameter. With cross and back machining.

The following materials are used:
Aluminum, stainless steel, brass, titanium alloys, cutting steel

Our turned parts include the following range of parts:
Axes, adapters, adapter bolts, adapters, panels, bolts, bushings, bypass screws, spacer bolts, spacers, spacers, throttle spindles, pressure rollers, jet inserts, jet needles, set screws, eccentric, lead nuts, guide pieces, sleeves, clamping screws, magnetic pin, magnetic screws, adapter, circuit boards, pole cores, detent pins, reducing connector, push rods, studs, styli, adjusting, stem nozzle, truing, inter alia,

We are your service provider in the following sectors
Electron beam welding
Electron beam hardening
Laser welding
Design meeting the requirements of electron beam welding
Development of electron-beam welding equipment

Electron beam welding totally annuls the classical requirements like:
Same material,
Same material thickness,
Low heat conduction,
Low content of companion elements and
Low carbon content.

The reason for that are the narrow deep seams and the high process speeds. Therefore, this method is not limited to standard materials but may also be successfully applied to special materials, various material combinations, thin-walled and thick-walled structures. Economic solutions are always based on designs meeting the requirements of electron beam technology since the technological advantages of electron beam engineering, weld joint testing and savings in the processing operations are combined.
The clever and extremely cost-saving component design simply uses the specific features inherent to electron beam welding:

Narrow weld seams due to energy input = 1% in comparison with TIG or MAG seams - resulting in minimum shrinkage and minimum distortion
Narrow heat-affected zone - permits relief of welding stresses through equalisation with the elasticity of basic material

In 1948 Moritz Kurt Juchheim founded the company M. K. Juchheim GmbH in Fulda, and started the production of high-quality glass and glass contact thermometers. The trade name JUMO is derived from the name of the founder (Juchheim, Moritz). The product spectrum was gradually expanded after 1950. In 1985 Bernhard Juchheim, son of the founder, took over general management. The mother company was renamed as JUMO GmbH & Co. KG in June 2003, to match the naming of the international subsidiaries. At the same time, Michael Juchheimwas appointed as C.E.O. with power of sole representation, as was his father, Bernhard.

Now in the third generation of activity as a family-owned enterprise, JUMO has a staff of more than 2,200 employees throughout the group. It is very well established, with 5 subsidiaries in Germany, 24 foreign subsidiaries, and more than 40 agencies around the world.

Today, the extensive product spectrum from JUMO covers components and system solutions for the measurement, control, recording and analysis of physical and chemical parameters. The products range from sensors for temperature, pressure and analytical measurement to the control and recording of measurement data. These instruments and systems are used in a very wide variety of sectors in the capital goods industries.

The support of the two prefabrication divisions for metalworking and electronic modules provides the company with a fast, flexible response. And customers can acquire everything from a single source – from simple system modules to complex process software. JUMO does not restrict itself to offering standard items from large-scale production, but is always oriented to the needs and specifications of its customers. The company’s development department and the expertise of its employees facilitate individual customer solutions that meet the highest requirements for functionality, precision and easy-to-use operation. A global service network, consisting of 13 independent sites abroad with additional external service partners, ensures that JUMO is always close to the customer.

We are a modern and innovative company with machining technology as our core competence. Quality, customer satisfaction and smooth production processes are our top priority.

Our discerning customers include well-known companies from various industrial sectors with a focus on the automotive and electrical industries as well as mechanical engineering. But are also very happy to be open to other and new industries, which is why we would be particularly happy to work with you!

Innovative manufacturing techniques enable the production of high-quality turned parts with precision. We manufacture fixtures and milled parts on CNC-controlled machining centers.

As a constantly growing company with over 25 years of experience, we realize the complete production for individual parts, series parts and assemblies. We deliver ready-to-assemble components or complete solutions from a single source.

We are in the field of machining;

turning, swiss turning, multi-axis turning
milling, 5-axis milling,
internal grinding, external grinding, surface grinding, profile grinding
Gear hobbing, gear profile grinding, screw manufacturing, all types of conical straight helical gears,
Laser cutting bend welding up to 30mm for sheet metal.
All surface cleaning and coating processes,
heat treatment works

We can.

Except that,

pipe bending,
Available in our profile extrusion capabilities.

You can try to choose us for quality production.
The superiority of the service provided is always our first indispensable principle.

Worldwide design and production of conveyor chains, sprockets, machining (e. g. milling, turning) and hardening

The company Karl Pieper GmbH & Co. KG since 1927, a specialist in engines and machinery, as well as for metalworking.
Mechanical Engineering - Machine Shop - grinding

h2> Success-

now and in the future /h2>

Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality.



Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.