As a certified (9001: 2015) family business, we specialize in the manufacture of CNC precision parts. We manufacture small and medium batch sizes on over 40 CNC machines.

Manufacturing facilities

CNC turning

CNC milling

Cylindrical grinding between tips

Centreless grinding

Deep hole drilling

Thread rolling

Honing

Laser marking

Magnetic crack testing

3D coordinate measuring machines

Form tester

Contour measuring device

Pressure test bench

Waves laser measuring device

Dear Sirs,

The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality.

The areas of application of the subsidiaries are divided as follows:

Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin
- CNC processing according to drawing (with or without certificate) as well as special, individual
and series production (travels: X1060, Y600, Z600 mm / table sizes:
1200x600 mm)
- mechanical processing / contract manufacturing (turning, milling, honing, surface grinding,
point grinding)
- Repair, maintenance and repair of internal combustion engines (e.g. Deutz,
CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.)
- Procurement of spare parts and replacement engines
- Radiator cleaning and repair


Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin
- Maintenance + repair of industrial equipment and engines
- Troubleshooting
- Container and plant construction (all materials)
- Stainless steel welding and apparatus construction (as a subcontractor with
CL1 certification)
- Complete support of CHP and emergency power systems



Elektro-Tech Genthin, Parkstr.6, 39307 Genthin
- Electrical installation in residential buildings (conventional and smart home) as well
Industrial and government buildings
- Electrical installation, maintenance and repair of automation technology
- Electrical installation / repair on industrial plants and vehicles
- Equipment check (stationary and mobile)
- Generator and electric motor maintenance as well as repairs (external)
- Supervision, installation, retrofitting and maintenance of street lighting


KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin
- vehicle repair
- Painting of industrial furniture and automotive parts
- tire service
- bodywork
- Spare parts trade
- TÜV and AU
- insurance benefits
- Vehicle fleet service for larger companies (with provision of a
Workshop replacement car tailored to the corporate customer)


All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters.


Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management.

If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de.


Wit...

In the early eighties, MPE developed a production in all precision engineering sectors at high technology levels, especially in the automotive one.
In 1997 the company moved to the current factory and achieved a production capacity of 15 million components per year.

We are your competent partner in the field of metal cutting.

Our special focus is on milling technology. The cheapest way we produce what in the lot size range of about 10-10000 piece. With very extensive experience in machining, clamping technology and assembly, we ask ourselves to you as a supplier for machined components and assemblies manufactured before.

We can advise you and are pleased to provide you with our performance capabilities.

Power spectrum

● Production of machined components produced from all popular as well as exotic materials on CNC machines.

Milling in the standard: up to 600mm in length and 400mm width (it can but larger components up to 800mm x 600mm to be processed)

Shooting: up to diameter 300mm and length up to 1000mm


● Assembly and production of complete assemblies

Our strength lies not only in the production of individual components in series, but also in the manufacturing of complete assemblies including surface treatment and assembly.


● We get everything out of your parts - if they let us

Besides the pure manufacture of your products, we also offer assistance in the design and complete engineering, for example when it comes to wanting to present to produce components of your portfolio more cost effective. Often there are several reasons that can make a cheaper component, without the be sacrificing accuracy and functionality needs.


● We make your components durable

Highly stressed components hold only if all parameters are correct.To this end, choosing the right material is crucial. We are happy to advise you.


● surface finish, such as hardcoat, anodized and PVD coatings

Also in terms of wear protection by coatings we have an extensive knowledge and working with well-known companies together Potential Coatings:

- Hardcoat coatings on aluminum alloys
- PVD and CVD coatings in multiple layers
- Anodizing technically and visually in different colors
- Galvanic and chemical surfaces technically and visually

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations.

Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ...

We twist for you - ask for impossibilities, our sheet metal forming realizes it.

The word is colorful - our longterm experience of perfect surface finishes.

Quality is no accident - our optimized quality management.

Save paper, time and nerves - the best quality in the right place at the right time, all from a single source.

We look forward to all questions, not only to inquiries.

For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

Here is a selection of our company's services:

CNC Milling
CNC turning
External-internal grinding, surface grinding, tool grinding
Wire EDM
Single and series production
Hardening and tempering, case hardening, vacuum hardening
-Plasma nitriding, gas nitriding
Tin-coated, coating TiAlN
-Burnishing
-Hard chrome plating, Hartvernickeln
-Hard coating, anodizing
-Edit of steel, non-ferrous metals and Werzeugstahl
-24 Hours Delivery

We are a medium company from the model, mold and tool making.
We have 8 CNC - milling machines run in two-shift operation. There are a wide variety of materials, processes both via CAD / CNC and conventional.

We design in Catia V5 and Tebis and manufacture both pre-production and series tools. Our tools are among others also performed with pneumatic, electric and hydraulic. In addition, work is also very strong in development and prototype construction.

Among our range of services: Foaming of soft foam, PU, GMPU, electrical systems, photovoltaics, etc., foundry model, body model and fixtures, fixture, machinery, extrusion tools, sheet metal stamping dies, stamping dies, injection molds, Cubingteile of aluminum and plastic, laminate molding, etc.

We are a young family business. We are driven by a passion for satisfied customers and quality products.
Our passion drives every aspect of our work, ensuring that every customer receives not just a product, but a product of superior craftsmanship that inspires every customer.

We aim to set standards of high professionalism and efficiency to enable customers to meet their most demanding design and material manufacturing needs.”

- MRT Mechatronics has established in 2013. Our company offers engineering solutions about robotics & automation.

- MRT Mechatronics specializes in precision CNC machining of small to large size parts in steel, stainless steel, aluminum and other alloys.

Foundation
Established in 1994, we mainly manufacture today for the steel plant and •.

Our team consists of 12 specialists from various fields.

Divisions:
• Drehtechnik
• Welding Technology
• Flame cutting
• Plasma cutting
• cuts on plate shears or saw
• Rollers
• Bending
• CNC turning
• CNC Milling
• Welding TIG, MIG, MAG
• Machining
• Milling

Grind

Cylindrical grinding
• Max. D400 x 1500

Sheet metal & steel construction
• Bending
• Cut
• Welding
• Rollers

As specialists in metalworking and surface finishing, we turn thin sheet metal into precise shapes. From sample production of components to small series production, as well as the production and assembly of system components, we are regarded as a competent, reliable and long-standing partner for renowned companies in medical technology, analytical technology, optical electronics, safety technology, sensor technology and aerospace technology.