For the production of your plastic parts, Mues Products & Moulds GmbH uses the compact injection moulding process employing multi-component or gas-assisted moulding technology. The injection moulding machines used have a clamping force of 125 to 850 metric tons. A pad printing system is integrated into the injection moulding process to efficiently produce printed parts. Your gas-assisted moulded parts are manufactured smoothly and efficiently thanks to the company’s own gas extraction plant.

We also have a wide range of welding and bonding systems available for the production of your parts. Have your moulds tested for series production or have your prototype parts injection moulded. We have many years of experience in the production of high-quality parts for car interiors. We also specialise in functional parts for engines and engine compartment design parts. The 3D coordinate measuring machine can determine the data of any object you wish. We document initial sampling reports and also proof of process capability certificates.

Mühlbauer Parts & Systems consists of four companies spread over three locations: MPS Roding GmbH and MBO GmbH in Roding, MPS Stollberg GmbH and Mühlbauer Technologies s.r.o. in Nitra. All four companies have one thing in common: the claim to manufacture parts and systems with the highest precision and to the fullest customer satisfaction - and this for over 40 years.

We focus on complete solutions with full responsibility, starting with raw materials, parts production, surface treatment and system assembly through to logistics.

Innovative companies demands innovative suppliers. Everything comes from one source - we are your ONE_STOP_SHOP.
Profit from our entire value chain, speed and flexibility - from rapid prototyping to mass production with minimal effort.

ORIGINAL EQUIPMENT MANUFACTURER SOLUTIONS | SURFACE ENGINEERING
INDIVIDUAL & SERIAL PRODUCTION | RESEARCH & DEVELOPMENT SUPPORT

On machines with the highest technical level, we produce small and large series
from 1 to over 1,000,000 pieces.

We offer the full range of metal cutting, manufacture quality products with the highest precision of all machinable materials with diameters ranging from Ø 4 to Ø 120 and part lengths up to 1000 mm.
We process steel, stainless steel and non-ferrous metals aluminum, brass and copper.

In our core competencies turning occupies the largest position, but also
Hardening, grinding, hard turning, and assembly of components are part of our range of services.

Our product range includes valve guides, pistons, bushings, washers, rings, valve seats, screw, cone, spool, pipes, sleeves, shafts, ground and hardened axles, hubs, stopper, spool, spring plates, pins, rollers, throttle bolts, nozzles, screws, Screw plugs, orifice plates, spindles, cap screws, pins, cylindrical rollers, sealing stop, shift rods, ...

All standard heat treatments such as carburizing, nitriding, nitro-carburizing and surface coatings such as zinc plating, chrome plating, bronzing, we can offer some in our house or together with suitable partners.

A testament to the high quality of our production processes and measuring equipment is certified to ISO TS 16949:2002.

We are a contract manufacturer of CNC - Turning and milling parts from all machinable materials.
We supply our products in various industries.

CNC milling up to 4 axes. 3-D contours to your data possible.We we have a CAD-CAM system and can process all common formats.

CNC turning with driven tools, and the y-axis. Furthermore, we can also install modules.

We offer:
- Turning
- Milling
- 4 - axle simultaneously
- Milling 3D
- Turn-Mill
- Assembly
- Assemblies
- CAD-CAM

Do you have components with a length or diameter of 1200 millimeters and a mass of three tons? No problem, we process workpieces up to 1000 x 1200 x 800 millimeters (width x height or diameter x depth) and a mass of up to three thousand kilograms on our CNC-controlled manufacturing machines.

Our high-quality machinery allows complex components to be manufactured with the highest precision, even with unusual dimensions. It doesn't matter whether they are rotationally symmetrical turned parts or cubic workpieces.

In both cases, the highest level of reproducibility and accuracy is guaranteed. For machining, we rely on ultra-modern and sturdy machining centers made in Germany; experts will be familiar with the Alzmetall brand.

The outstanding features of five-axis simultaneous operation make these manufacturing centers guarantee unmistakable quality and speed. In doing so, we not only machine simple structural steels, but also materials that are sometimes feared because they are difficult to process.

The following is a selection of the materials we process

General structural steels
chromium-nickel steels
duplex steels
Highly heat-resistant and high-alloyed steels

High-strength aluminum
Inconel (600,625,718,601.725, X-750)
All plastics
Titanium (pure titanium, Ti6Al4V, Ti6Al4V ELI, Ti6Al7Nb, Ti3Al2.5V)

Murtfeldt Plastics GmbH & Co. KG



Murtfeldt Plastics is headquartered in Dortmund, Germany, is a steadily growing company. Murtfeldt manufactures machine parts for the drive and conveyor technology from highly wear-resistant sliding plastics. Customer focus and service orientation are considered very important. These are guaranteed by subsidiaries and a network of contractors.



From four employees in 1954 Murtfeldt is now grown to approximately 200 employees. Murtfeldt has approximately 16,000 m² of production and warehouse space and a product and service range, which is one of the widest on the market. Machinery parts and shapes according to customer drawings - even with the smallest numbers - inexpensive to produce, already counted in the 1970's to the Murtfeldt strengths. The wide standard range of chain guides, belt guides and slide profiles and the fully automated, maintenance-free chains and belt tensioners are world-renowned.



Precast expertise firsthand.



Offers a special service, the Dortmund company designers and users. The Dortmund are specialists for plastic with particularly good sliding and wear properties and manufacture individual parts and series depending on the customer. Is of particular importance within the house of the Application Engineering Department. This engineering department is available to all customers. The Murtfeldt engineers can advise you on the subject of plastic, give tips for editing, to create tolerances or in cooperation with customers all plastic construction.

Metalworking

As a supplier of medium and large companies in the metal industry, we enjoy a good reputation through accurate and timely implementation of specifications. We manufacture products of the highest precision with our modern machinery in small or large series of bespoke or as a system solution: turning, milling, drilling, bending, welding, plasma and oxyfuel cutting, fixture, special designs.

Save money!

Save money in the awarding of contracts to sheltered workshops according to § 71 SGB IX

Companies employing more than 20 workers are required to pay a compensatory levy in the event that they do not employ recognized severe disabilities in their operation. The employment rate for these companies is 5%, ie every 20th Employee is to be a recognized severe disabilities. The countervailing charge is for any unused space requirement depending on the level up to € 3,068 per year.

In addition to the employment of severely disabled approved, you can get rid of the payment of such compensation levy by the fact that you subcontracted approved workshops for disabled people. In this case, you can deduct 50% of the invoice amount that relates to the job performance of people with disabilities, on your levy.

An example:

You place it in a recognized workshop for disabled people a job with an invoice amount of € 2.000, -. The labor cost per unit of this contract is € 1.500, -. Of these, € 1.500, - You can deduct 50% of the countervailing charge, so you € 750 - can be saved.


Processing options:

CNC-Dreh/Fräsbearbeitung area:
1) Mazak QT Nexus MS 250, launched in 2008, driven event center, counter spindle
Turning diameter chuck parts: 10 - 300 mm
Turning diameter rod: 10 - 70 mm
Turning length: max.450mm
2) Mazak SQT 100 MY + Iemca bar loader, launched in 2001, Y-axis, Iemca-bar loader
Turning diameter rod: 4 - 40mm of rod
Y-axis: +-40mm
Turning length: max 300mm
3) Mazak SQT 200 M, launched in 2001, driven WKZ, LNS bar feeders
Turning diameter chuck parts: 15 - 200 mm
Turning diameter rod: 5 - 50 mm
Turning length: max. 500 mm

CNC-Fräsen/Bohren/Gewinde:
1) Mazak VTC 20B, launched in 1998, 24 WKZ, IKZ
Machining Dimensions: max. 500x500x1100 mm
2) Fadal VMC 1500 XS, launched in 1998, 20 WKZ
Machining Dimensions: max. 400x400x700 mm
3) Deckel FP4, launched in 1989
Machining Dimensions: max. 400x300x600 mm

Automatic saws:
1) Bandsägeautomat MEP Shark 280 SXI, launched in 2001
Sawing flat: up to 300 mm width, 250 mm height
Circular saws: up to 250 mm diameter
Length up to 1500 mm single cut, infinitely short cuts from 6m length
2) circular saw Berg & Schmidt VKS 350, launched in 2001
Sawing Flat: 100 - 100 mm
Circular saws: up to 120 mm mild steel, max.80mm stainless steels
Length: up to 1000 mm single cut, infinitely short cuts from 6m length

These diverse standard machines such as drill presses, lathes etc.



Mürwiker workshops GmbH
Commercial building 4
24955 Harrislee
0461 770069
0461 7749107

Production of turned and milled parts in the Czech Republic. We deliver inexpensive small and medium series thanks to collective transport. Quality assurance on site. Delivery time: 4-6 weeks
Active for the Swiss machine industry for 25 years, high quality standard.

Our customers value us as a reliable and versatile partner. We are also happy to take on major challenges and support your project or production part with a great deal of know-how, as well as a high level of quality and cost awareness.

We provide you with precisely machined components in turned, milled or cut to size. On request, we carry out preliminary work such as chamfering, planing or deliver semi-finished products in the form of round bars, plates or tubes.

In addition to ready-to-install machined components, which we produce for you using all common manufacturing processes, we offer a wide range of semi-finished plastic products. If required, we deliver plates, rods and tubes* either ready to manufacture or with the desired pre-processing such as sawing, planing (up to 4 sides simultaneously), profiling, chamfering, etc. Thanks to our decades of experience, we are the right partner for almost every task in the plastics sector.